Hostname: page-component-78c5997874-g7gxr Total loading time: 0 Render date: 2024-11-02T21:03:33.169Z Has data issue: false hasContentIssue false
  • English
  • Français

Nitrate-based metalorganic deposition of CeO2 on yttria-stabilized zirconia

Published online by Cambridge University Press:  01 January 2006

D.E. Wesolowski  and
M.J. Cima
D.E. Wesolowski
Affiliation:
Massachusetts Institute of Technology, Cambridge, Massachusetts 02139
M.J. Cima*
Affiliation:
Massachusetts Institute of Technology, Cambridge, Massachusetts 02139
*
a)Address all correspondence to this author. e-mail: [email protected]
Get access

Abstract

An aqueous nitrate metalorganic deposition (MOD) process was used to form a 30-nm-thick c-axis-textured ceria (CeO2) layer on a yttria-stabilized zirconia (YSZ) single-crystal substrate. X-ray diffraction showed the CeO2 layer was an (001) oriented film with a ω-scan full width at half-maximum of 1.47°. The average roughness of the ceria films, measured by atomic force microscopy, was about 5 nm. Critical current densities of up to 3.6 × 106 A/cm2 were measured on a 0.35-μm Ba2YCu3O7−x (YBCO) layer deposited over this cap layer using a trifluoroacetate (TFA)-based MOD ex situ process. The physical vapor deposition-derived ceria cap layer used in the most common coated conductor buffer layer stacks may be replaced by such a MOD processed film.

Keywords

Metalorganic deposition
Type
Rapid Communications
Information
Journal of Materials Research , Volume 21 , Issue 1 , January 2006 , pp. 1 - 4
Copyright
Copyright © Materials Research Society 2006

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1.Schwartz, R.: Chemical solution deposition of perovskite thin films. Chem. Mater. 9, 2325 (1997).CrossRefGoogle Scholar
2.Bhuiyan, M.S., Paranthaman, M., Sathyamurthy, S., Aytug, T., Kang, S., Lee, D.F., Goyal, A., Payzant, E.A. and Salama, K.: MOD approach for the growth of epitaxial CeO2 buffer layers on biaxially textured Ni–W substrates for YBCO coated conductors. Supercond. Sci. Technol. 16, 1305 (2003).CrossRefGoogle Scholar
3.Venkataraman, K., Hellstrom, E.E. and Paranthaman, M.: Growth of lanthanum manganate buffer layers for coated conductors via a metal-organic decomposition process. IEEE Trans. App. Supercond. 15, 3005 (2005).CrossRefGoogle Scholar
4.Siegal, M.P., Clem, P.G., Dawley, J.T., Richardson, J., Overmyer, D.L. and Holesinger, T.G.: Optimizing SrTiO3 films on textured Ni substrates using chemical solution deposition. J. Mater. Res. 20, 910 (2005).CrossRefGoogle Scholar
5.Sandiumenge, F., Cavallaro, A., Coll, M., Gàzquez, J., Puig, T., Pomar, A., Romà, N., Mestres, N. and Obradors, X.: Growth mechanism and opmization of MOD CeO2 buffer layers for TFA YBa2Cu3O7/CeO2 multilayers, in Recent Advances in Superconductivity—Materials Synthesis, Multiscale Characterization, and Functionally Layered Composite Conductors, edited by Holesinger, T., Izumi, T., MacManus-Driscoll, J.L., Miller, D., and Wong-Ng, W. (Mater. Res. Soc. Symp. Proc. 868E Warrendale, PA, 2005), C6.8.1.Google Scholar
6.Goyal, A., Heatherly, L. and Paranthaman, M. RABiTS Substrates Research and Development. (DOE Superconductivity for Electric System 2005 Annual Peer Review, Washington, DC, 2005).Google Scholar
7.Aytug, T., Paranthaman, M., Kang, B.W., Beach, D.B., Sathyamurthy, S., Specht, E.D., Lee, D.F., Feenstra, R., Goyal, A., Kroeger, D.M., Leonard, K.J., Martin, P.M. and Christen, D.K.: Reel-to-reel continuous chemical solution deposition of epitaxial Gd2O3 buffer layers on biaxially textured metal tapes for the fabrication of YBa2Cu3O7−δ coated conductors. J. Am. Ceram. Soc. 86, 257 (2003).CrossRefGoogle Scholar
8.Paranthaman, M.P., Chirayil, T.G., List, F.A., Cui, X., Goyal, A., Lee, D.F., Specht, E.D., Martin, P.M., Williams, R.K., Kroeger, D.M., Morrell, J.S., Beach, D.B., Feenstra, R. and Christen, D.K.: Fabrication of long lengths of epitaxial buffer layers on biaxially textured nickel substrates using a continuous reel-to-reel dip-coating unit. J. Am. Ceram. Soc. 84, 273 (2001).CrossRefGoogle Scholar
9.Sathyamurthy, S., Paranthaman, M., Kang, B.W., Zhai, H.Y., Aytug, T., Christen, H.M., Specht, E.D., Kowalewski, M.M., Goyal, A. and Martin, P.M.: Fabrication of high J c YBa2Cu3O7−d coated conductors using sol-gel buffer layers on nickel and nickel alloy substrates, in Materials for High-Temperature Super Conductor Technologies, edited by Paranthaman, M.P., Rupich, M.W., Salama, K., Mannhart, J., and Hasegawa, T. (Mater. Res. Soc. Symp. Proc. 689 Warrendale, PA, 2001), E10.5.1.Google Scholar
10.Clem, P. and Voight, J. All Solution Deposited YBCO Coated Conductors. (DOE Superconductivity for Electric System 2005 Annual Peer Review, Washington, DC, 2005).Google Scholar
11.Ng, M.F. and Cima, M.J.: Heteroepitaxial growth of lanthanum aluminate films derived from mixed metal nitrates. J. Mater. Res. 12, 1306 (1997).CrossRefGoogle Scholar
12.McIntyre, P.C., Cima, M.J., Smith, J.A., Hallock, R.B., Siegal, M.P. and Phillips, J.M.: Metalorganic deposition of high-J c Ba2YCu3O7−x thin films from trifluoroacetic acid precursors onto SrTiO3. J. Appl. Phys. 71, 1868 (1992).CrossRefGoogle Scholar
13.Kroschwitz, J.I. and Howe-Grant, M.: Kirk-Othmer Encyclopedia of Chemical Technology, Vol. 5, 4th ed. (John Wiley and Sons, New York, 1993), p. 735.Google Scholar
14.Spanková, M., Vávra, I., Gazi, S., Machajdik, D., Chromik, S., Frölich, K., Hellemans, L. and Benacka, S.: Growth and recrystallization of CeO2 thin films deposited on R-plane sapphire by off-axis rf sputtering. J. Cryst. Growth 218, 287 (2000).CrossRefGoogle Scholar
15.Gaskell, D.R.: Introduction to the Thermodynamics of Materials, 3rd ed. (Taylor & Francis, Washington, DC, 1995), p. 370.Google Scholar
16.Barin, I.: Themochemical Data of Pure Substances, Vol. 1, 3rd ed. (VCH Publishers, New York, 1995), p. 519.CrossRefGoogle Scholar