Article contents
Low temperature magnetic transition and high temperature oxidation in INCONELa) alloy 718
Published online by Cambridge University Press: 31 January 2011
Abstract
X-ray diffraction and temperature dependent (5 K–380 K) magnetic measurements have been carried out in INCONEL 718 superalloy before and after high temperature aging treatments. (INCONEL is a trademark of the INCO family of companies.) The nominal composition of this alloy is Ni (52.5%), Cr (19.0%), Fe (18.5%), Nb (5.1%), Mo (3.0%), Ti (0.9%), Al (0.5%), Cu (0.15%), and C (0.08%), and it yields an x-ray diffraction pattern consisting of a fcc phase with α = 3.5987 (3) Å and an orthorhombic phase associated with δ-Ni3Nb. It is concluded that the fcc pattern is due to both the γ austenitic phase and γ′ Ni3(Al, Ti) phase of alloy 718. The standard annealing and aging treatment carried out in air at temperatures between 621 and 982 °C produces surface oxides (Cr, Fe)2O3 and FeNbO4 (which are easily removed by etching and polishing) and contracts the lattice. Magnetic measurements show a distinct phase transition at Tc = 14 K, which has been attributed to the γ′-Ni3(Al, Ti) phase by the process of elimination and by observing that it has most of the characteristics of the weak itinerant ferromagnet Ni74.5Al25.5. This transition may have some effects on the cryogenic applications of this alloy.
- Type
- Articles
- Information
- Copyright
- Copyright © Materials Research Society 1996
Footnotes
INCONEL is a trademark of the INCO family of companies.
References
REFERENCES
An addendum has been issued for this article:
- 10
- Cited by
Linked content
Please note an has been issued for this article.