Hostname: page-component-586b7cd67f-vdxz6 Total loading time: 0 Render date: 2024-11-28T02:58:29.314Z Has data issue: false hasContentIssue false
  • English
  • Français

Liquidus projection of the ternary Ag–Sn–Ni system

Published online by Cambridge University Press:  03 March 2011

Sinn-wen Chen ,
Hsiu-feng Hsu  and
Chih-wei Lin
Sinn-wen Chen*
Affiliation:
Department of Chemical Engineering, National Tsing Hua University, Hsin-Chu, Taiwan 300, Republic of China
Hsiu-feng Hsu
Affiliation:
Department of Chemical Engineering, National Tsing Hua University, Hsin-Chu, Taiwan 300, Republic of China
Chih-wei Lin
Affiliation:
Department of Chemical Engineering, National Tsing Hua University, Hsin-Chu, Taiwan 300, Republic of China
*
a) Address all correspondence to this author. e-mail: [email protected]
Get access

Abstract

The liquidus projection of the ternary Sn–Ag–Ni system at the Sn-rich side was determined experimentally. No ternary compound was found, and the ζ–Ag4Sn, Ag3Sn, and Sn existed as the primary solidification phases only in very small compositional portions of the ternary Sn–Ag–Ni system. In more than half of the compositional regime of the ternary system, the Ni3Sn2 phase was the primary solidification phase. The differential thermal analysis technique was used to determine the reaction temperatures and solidification sequences of various Sn-rich Sn–Ag–Ni alloys. Three invariant reactions were found: L = Sn + Ni3Sn4 + Ag3Sn, L + ζ–Ag4Sn = Ni3Sn4 + Ag3Sn and L + Ni3Sn2 = ζ–Ag4Sn + Ni3Sn4. Their reaction temperatures have been determined to be 219, 488, and 516.5 °C, respectively.

Keywords

AlloyPhase equilibria
Type
Articles
Information
Journal of Materials Research , Volume 19 , Issue 8 , August 2004 , pp. 2262 - 2267
Copyright
Copyright © Materials Research Society 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1.Chen, S-W., Chuang, Y.Y., Chang, Y.A. and Chu, M.G.: Calculation of phase diagrams and solidification paths of Al-rich aluminum-lithium-copper alloys. Metall. Trans. A 22A, 2837 (1991).Google Scholar
2.Lin, C.H., Chen, S-W. and Wang, C-H.: Phase equilibria and solidification properties of Sn–Cu–Ni alloys. J. Electron. Mater. 31, 907 (2002).Google Scholar
3.Deverux, O.F., Topics in metallurgical thermodynamics (Krieger Publishing Company, Melbourne, FL, 1983).Google Scholar
4.Karakaya, I. and Thompson, W.T.: The Ag–Sn (silver-tin) system. Bull. Alloy Phase Diagrams 8, 340 (1987).Google Scholar
5.Oh, C-S., Shim, J-H., Lee, B-J. and Lee, D.N.: A thermodynamic study on the Ag–Sb-Sn system. J. Alloys Compd. 238, 155 (1996).Google Scholar
6.Ghosh, G.: Thermodynamic modeling of the nickel-lead-tin system. Metall. Mater. Trans. A 30A, 1481 (1999).CrossRefGoogle Scholar
7.Luo, H-T. and Chen, S-W.: Phase equilibria of the ternary Ag–Cu–Ni system and the interfacial reactions in the Ag–Cu/Ni couples. J. Mater. Sci. 31, 5059 (1996).Google Scholar
8.Hsu, H-F. and Chen, S-W.: Phase equilibria of the Sn–Ag–Ni ternary system and interfacial reactions at the Sn–Ag/Ni joints. Acta Mater. 52, 2541 (2003).CrossRefGoogle Scholar
9.Kattner, U. (private communication, 2003).Google Scholar