Hostname: page-component-669899f699-8p65j Total loading time: 0 Render date: 2025-04-27T22:17:03.428Z Has data issue: false hasContentIssue false
  • English
  • Français

Effect of trace carbon on the uv-induced behavior of aluminum nitride ceramics

Published online by Cambridge University Press:  03 March 2011

J.C. Kaplan  and
R.A. Gerhardt
J.C. Kaplan
Affiliation:
School of Materials Science and Engineering, The Georgia Institute of Technology, 778 Atlantic Drive, Atlanta, Georgia 30332-0245
R.A. Gerhardt*
Affiliation:
School of Materials Science and Engineering, The Georgia Institute of Technology, 778 Atlantic Drive, Atlanta, Georgia 30332-0245
*
a)Author to whom correspondence should be sent.
Get access

Abstract

The effect of uv irradiation on the material properties of AlN containing low oxygen content (<0.3 wt. %) has been investigated. Upon irradiation with a 150 W Hg-Xe arc lamp, increases in dielectric loss and thermal conductivity drops were observed. Changes in the optical properties, including formation of an absorption band at 650 nm, and photodarkening were also observed. All samples were characterized for trace impurities including carbon, calcium, and oxygen. The magnitude of the uv-induced drops in dielectric loss and the absorption at 650 nm of samples tested were found to depend on the presence of trace levels of residual carbon. UV-induced increases in dielectric loss show an inverse relationship, and formation of an absorption band shows a direct relationship to carbon content.

Type
Rapid Communications
Information
Journal of Materials Research , Volume 9 , Issue 9 , September 1994 , pp. 2209 - 2212
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

REFERENCES

1Slack, G. A., J. Phys. Chem. Solids 34, 321 (1973).CrossRefGoogle Scholar
2Slack, G. A., J. Phys. Chem. Solids 48, 641 (1987).CrossRefGoogle Scholar
3Lee, R., J. Am. Ceram. Soc. 74, 2242 (1991).Google Scholar
4Kurokawa, Y., Utsumi, K., and Takamizawa, H., J. Am. Ceram. Soc. 71, 588 (1988).CrossRefGoogle Scholar
5Harris, J. H. and Youngman, R. A., J. Mater. Res. 8, 154 (1993).CrossRefGoogle Scholar
6Harris, J. H., Enck, R. C., and Youngman, R. A., Phys. Rev. B 47, 5428 (1993).Google Scholar
7Harris, J. H. and Enck, R. C., J. Mater. Res. 8, 2734 (1993).CrossRefGoogle Scholar
8Enck, R. C. and Harris, R. D., in Advanced Electronic Packaging Materials, edited by Barfknecht, A. T., Partridge, J. P., Chen, C. J., and Li, C-Y. (Mater. Res. Soc. Symp. Proc. 167, Pittsburgh, PA, 1990), p. 235.Google Scholar
9Schulman, J. H. and Compton, W. D., Color Centers in Solids (The Macmillan Company, New York, 1962), p. 41.Google Scholar
10Moulson, A. J. and Herbert, J. M., Electroceramics (Chapman & Hall, London, England, 1991), pp. 58–67.Google Scholar
11Slack, G. A. and McNelly, T. F., J. Cryst. Growth 42, 560 (1977).Google Scholar
12Long, G. and Foster, L. M., J. Am. Ceram. Soc. 42, 53 (1959).CrossRefGoogle Scholar