Hostname: page-component-cd9895bd7-dk4vv Total loading time: 0 Render date: 2024-12-28T17:12:36.876Z Has data issue: false hasContentIssue false
  • English
  • Français

Effect of surface conditions and strain hardening on the passivity breakdown of 304 stainless steel

Published online by Cambridge University Press:  11 April 2012

Tewfik Souier  and
Matteo Chiesa
Tewfik Souier*
Affiliation:
Laboratory for Energy and Nano Science, Masdar Institute, Abu Dhabi 54224, United Arab Emirates; and Service de Physique et Chimie des Surfaces et Interfaces, CEA Saclay, Gif-sur-yvettes 91191, France
Matteo Chiesa
Affiliation:
Laboratory for Energy and Nano Science, Masdar Institute, Abu Dhabi 54224, United Arab Emirates; and Department of Mechanical Engineering, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139
*
a)Address all correspondence to this author. e-mail: [email protected]
Get access

Abstract

Electrical and electrochemical properties of the passive layer formed on 304L austenitic stainless steel are investigated by means of both conductive atomic force microscopy in air and electrochemical atomic force microscopy in chloride-containing media. The maps of local electrical conductivity of the oxide overlayer exhibit different patterns depending on the surface conditions after mechanical or electrochemical polishing. In particular, the passive film covering strain-hardened regions reveals a higher electrical conductivity. The local enhancement of the electrical conduction is explained by local changes of the stoichiometry of the passive film. Moreover, the highly conductive regions lead to a local breakdown of the native oxide in chloride-containing media and favor the initiation of localized pits.

Keywords

Scanning-probe microscopySteelCorrosion
Type
Articles
Information
Journal of Materials Research , Volume 27 , Issue 12 , 28 June 2012 , pp. 1580 - 1588
Copyright
Copyright © Materials Research Society 2012

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1.Baroux, B.: Further insights on the pitting corrosion of stainless steels, in Corrosion Mechanisms in Theory and Practice, edited by Marcus, Ph. (Marcel Dekker, New York, 2002), pp. 311–347 (Chapter 10).CrossRefGoogle Scholar
2.Lott, S.E. and Alkire, R.C.: The role of inclusions on initiation of crevice corrosion of stainless steel. J. Electrochem. Soc. 136, 973 (1989).CrossRefGoogle Scholar
3.Williams, D.E. and Zhu, Y.Y.: Explanation for initiation of pitting corrosion of stainless steels at sulfide inclusions. J. Electrochem. Soc. 147, 1763 (2000).CrossRefGoogle Scholar
4.Vignal, V., Krawiec, H., Heintz, O., and Oltra, R.: The use of local electrochemical probes and surface analysis methods to study the electrochemical behaviour and pitting corrosion of stainless steels. Electrochim. Acta 52, 4994 (2007).CrossRefGoogle Scholar
5.Boulleret, C., Pastol, J.L., Bigot, J., Baroux, B., and Gorse, D.: Pitting resistance of pure Fe-17%Cr alloys: Consequences for localized corrosion modeling. J. Phys. IV Fr. 5, C7, 415–422 (1995).Google Scholar
6.Gorse, D. and Baroux, B.: Investigating pitting corrosion of stainless steels by signal processing techniques, in Passivity of Metals and Semiconductors, edited by Ives, M.B., Luo, J.L., and Rodda, J.R. (Electrochemical Society Proceedings, Vol. 99–42, 1999), p. 528.Google Scholar
7.Basame, S.B. and White, H.S.: Scanning electrochemical microscopy of native titanium oxide films. Mapping the potential dependence of spatially-localized electrochemical reactions. J. Phys. Chem. 99, 16430 (1995).CrossRefGoogle Scholar
8.Basame, S.B. and White, H.S.: Scanning electrochemical microscopy: measurement of the current Density at microscopic redox-active sites on titanium. J. Phys. Chem. B 102, 9812 (1998).CrossRefGoogle Scholar
9.Basame, S.B. and White, H.S.: Pitting corrosion of titanium: The relationship between pitting potential and competitive anion adsorption at the oxide film/electrolyte interface. J. Electrochem. Soc. 147, 1376 (2000).CrossRefGoogle Scholar
10.Casillas, N., Charlebois, S.J., Smyrl, W.H., and White, H.S.: Scanning electrochemical microscopy of precursor sites for pitting corrosion on titanium. J. Electrochem. Soc. 140, L142 (1993).CrossRefGoogle Scholar
11.Casillas, N., Charlebois, S.J., Smyrl, W.H., and White, H.S.: Pitting corrosion of titanium. J. Electrochem. Soc. 141, 636 (1994).CrossRefGoogle Scholar
12.Yin, Y., Niu, L., Lu, M., Guo, W., and Chen, S.: In situ characterization of localized corrosion of stainless steel by scanning electrochemical microscope. Appl. Surf. Sci. 255, 9193 (2009).CrossRefGoogle Scholar
13.Marcus, P., Maurice, V., and Strehblow, H.H.: Localized corrosion (pitting): A model of passivity breakdown including the role of the oxide layer nanostructure. Corros. Sci. 50, 2698 (2008).CrossRefGoogle Scholar
14.Strehblow, H-H.: Mechanism of pitting corrosion. Corrosion Mechanism in Theory and Practice, 2nd edition. Edited byMarcus, P., (Marcel Dekker: New York, 2002), pp. 243–285.CrossRefGoogle Scholar
15.Amri, J., Souier, T., Malki, B., and Baroux, B.: Effect of the final annealing of cold rolled stainless steels sheets on the electronic properties and pit nucleation resistance of passive films. Corros. Sci. 50, 431 (2008).CrossRefGoogle Scholar
16.Souier, T., Berthome, B., Malki, B., and Baroux, B.: Effect of the passive film on the crevice corrosion of stainless steels experimental and modeling approaches. ECS Trans. 16, 321 (2009).CrossRefGoogle Scholar
17.Peguet, L., Malki, B., and Baroux, B.: Influence of cold working on the pitting corrosion resistance of stainless steels. Corros. Sci. 49, 1933 (2007).CrossRefGoogle Scholar
18.Vignal, V., Mary, N., and Oltra, R.: Study of the mechanical effects of passivity breakdown by local probe techniques, in Passivation of Metals and Semiconductors, and Properties of Thin Oxide Layers, edited by Marcus, P. and Maurice, V. (Paris, France, 2006), pp. 463–468.CrossRefGoogle Scholar
19.Galvele, J.R.: Transport processes and the mechanism of pitting of metals. J. Electrochem. Soc. 123, 464 (1976).CrossRefGoogle Scholar
20.Martin, F.A., Bataillon, C., and Cousty, J.: In situ AFM detection of pit onset location on a 304L stainless steel. Corros. Sci. 50, 84 (2008).CrossRefGoogle Scholar
21.Pinhero, P.J., Lister, T.E., Trowbridge, T.L., and Mizia, R.E.: Analysis of local defects in surface films on commercial alloys using conductive atomic force microscopy (C-AFM), Corrosion Nace International, 03380 (2003).Google Scholar
22.Souier, T., Martin, F., Bataillon, C., and Cousty, J.: Local electrical characteristics of passive films formed on stainless steel surfaces by current sensing atomic force microscopy. Appl. Surf. Sci. 256, 2434 (2010).CrossRefGoogle Scholar
23.Asylum Research: http://www.asylumresearch.com/Applications/Orca/Orca.shtml.Google Scholar
24.NANOSENSORS™: http://www.nanosensors.com/CDT-NCHR.htm.Google Scholar
25.Gutman, E.M.: Mechanochemistry of Solid Surfaces (World Scientific Publishing, 1994).CrossRefGoogle Scholar
26.Vignal, V., Delrue, O., Heintz, O., and Peultier, J.: Influence of the passive film properties and residual stresses on the micro-electrochemical behavior of duplex stainless steels. Electrochim. Acta 55, 7118 (2010).CrossRefGoogle Scholar
27.Sort, J., Concustell, A., Menendez, E., Surinach, S., Baro, M.D., Farran, J., and Nogues, J.: Selective generation of local ferromagnetism in austenitic stainless steel using nanoindentation. Appl. Phys. Lett. 89, 032509 (2006).CrossRefGoogle Scholar