Hostname: page-component-78c5997874-94fs2 Total loading time: 0 Render date: 2024-11-09T22:47:49.291Z Has data issue: false hasContentIssue false
  • English
  • Français

Ceramic-to-metal welding by a pressurized combustion reaction

Published online by Cambridge University Press:  03 March 2011

Yoshinari Miyamoto ,
Takashi Nakamoto ,
Mitsue Koizumi  and
Osamu Yamada
Yoshinari Miyamoto
Affiliation:
Institute of Scientific and Industrial Research, Osaka University, Ibaraki, Osaka 567, Japan
Takashi Nakamoto
Affiliation:
Institute of Scientific and Industrial Research, Osaka University, Ibaraki, Osaka 567, Japan
Mitsue Koizumi
Affiliation:
Institute of Scientific and Industrial Research, Osaka University, Ibaraki, Osaka 567, Japan
Osamu Yamada
Affiliation:
College of General Education, Osaka Industrial University, Daito, Osaka 574, Japan
Get access

Abstract

A new method of ceramic-to-metal welding has been developed using a pressurized combustion reaction to form Mo—TiB2—Mo and Mo—TiC—Mo couples. Mixtures of Ti powder with B or C between Mo disks were electrically ignited under 3 GPa pressure. The exothermic reaction of the powders resulted in the formation of TiB2 and TiC and reaction with Mo at the metal interface. Weld strengths of the Mo—TiB2—Mo and Mo—TiC—Mo couples were 20—40 MPa and ∼ 10 MPa, respectively.

Type
Rapid Communications
Information
Journal of Materials Research , Volume 1 , Issue 1 , February 1986 , pp. 7 - 9
Copyright
Copyright © Materials Research Society 1986

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1Miyamoto, Y., Koizumi, M., and Yamada, O., Commun. Am. Ceram. Soc. 67, C-224 (1984).Google Scholar
2Yamada, O., Miyamoto, Y., and Koizumi, M., Am. Ceram. Soc. Bull. 64, 319 (1985).Google Scholar
3Merzhanov, A. G. and Borovinskaya, I. P., Dokl. Chem. (Engl. transl.) 204 (2); 429 (1972).Google Scholar
4Crider, J. F., Ceram. Eng. Sci. Proc. 3(9–10), 519 (1982).Google Scholar
5Holt, J. B. and Munir, A., in Proceedings of the International Symposium on Ceramic Components for Engine, Japan, 1983, edited by Somiya, S., Kanai, E., and Ando, K. (Reidel, New York, 1983), p. 721.Google Scholar
6Thermophysicat Properties of Matter, edited by Touloukian, Y. S. (IFI/Plenum, New York, 1975, 1977), Vol. 12 (1975), p. 208 for Mo, Vol. 13 (1977), p. 778 for TiB2 and p. 891 for TiC.Google Scholar
7Osugi, J., Shimizu, K., Inoue, K., and Yasunami, K., Rev. Phys. Chem. Jpn. 34, 1 (1964).Google Scholar