Hostname: page-component-cd9895bd7-8ctnn Total loading time: 0 Render date: 2024-12-27T08:42:06.627Z Has data issue: false hasContentIssue false
  • English
  • Français

An improved kinetics model to describe dynamic recrystallization behavior under inconstant deformation conditions

Published online by Cambridge University Press:  13 September 2016

Ming-Song Chen ,
Kuo-Kuo Li ,
Yong-Cheng Lin  and
Wu-Quan Yuan
Ming-Song Chen*
Affiliation:
School of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China; and State Key Laboratory of High Performance Complex Manufacturing, Changsha 410083, China
Kuo-Kuo Li
Affiliation:
School of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China; and State Key Laboratory of High Performance Complex Manufacturing, Changsha 410083, China
Yong-Cheng Lin*
Affiliation:
School of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China; State Key Laboratory of High Performance Complex Manufacturing, Changsha 410083, China; and Light Alloy Research Institute of Central South University, Changsha 410083, China
Wu-Quan Yuan
Affiliation:
School of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China; and State Key Laboratory of High Performance Complex Manufacturing, Changsha 410083, China
*
a) Address all correspondence to these authors. e-mail: [email protected]
b) e-mail: [email protected]
Get access

Abstract

The classical dynamic recrystallization (DRX) kinetics models, such as Avrami equation, are often used to describe the DRX behaviors of alloys. However, it is found that the classical DRX kinetics models cannot be directly applied to evaluate DRX volume fractions under inconstant deformation conditions, such as at fluctuant deformation temperature and strain rate. It obviously limits their application in the practical industrial production. Therefore, an improved DRX kinetics model is proposed based on the hypothesis that the derivatives of DRX volume fraction with respect to strain only depends on the current deformation temperature, strain rate, and DRX volume fraction. To verify the improved DRX kinetics model, the hot compressive tests in which the strain rate is inconstant are carried out on a solution-treated Ni-based superalloy. Experimental results indicate that the improved DRX kinetics model can well predict the DRX behavior under inconstant deformation conditions.

Keywords

dynamic recrystallizationDRX kinetics modelDRX volume fractionNi-based superalloymicrostructureinconstant deformation condition
Type
Articles
Information
Journal of Materials Research , Volume 31 , Issue 19 , 14 October 2016 , pp. 2994 - 3003
Check for updates
Copyright
Copyright © Materials Research Society 2016 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

McQueen, H.J.: Development of dynamic recrystallization theory. Mater. Sci. Eng., A 387–389, 203 (2004).Google Scholar
De Jaeger, J., Solas, D., Fandeur, O., Schmitt, J., and Rey, C.: 3D numerical modeling of dynamic recrystallization under hot working: Application to Inconel 718. Mater. Sci. Eng., A 33, 646 (2015).Google Scholar
Beladi, H. and Hodgson, P.D.: Effect of carbon content on the recrystallization kinetics of Nb-steels. Scr. Mater. 56, 1059 (2007).CrossRefGoogle Scholar
Vervynckt, S., Verbeken, K., Thibaux, P., and Houbaert, Y.: Recrystallization–precipitation interaction during austenite hot deformation of a Nb microalloyed steel. Mater. Sci. Eng., A 528, 5519 (2011).Google Scholar
Ji, G.L., Li, F.G., Li, Q.H., Li, H.Q., and Li, Z.: Research on the dynamic recrystallization kinetics of Aermet100 steel. Mater. Sci. Eng., A 527, 2350 (2010).Google Scholar
Gu, S.D., Zhang, L.W., Zhang, C., Ruan, J.H., and Zhen, Y.: Modeling the effects of processing parameters on dynamic recrystallization behavior of deformed 38MnVS6 steel. J. Mater. Eng. Perform. 24, 1790 (2015).Google Scholar
Chen, M.S., Lin, Y.C., and Ma, X.S.: The kinetics of dynamic recrystallization of 42CrMo steel. Mater. Sci. Eng., A 556, 260 (2012).Google Scholar
Zhao, B.C., Zhao, T., Li, G.Y., and Lu, Q.: The kinetics of dynamic recrystallization of a low carbon vanadium-nitride microalloyed steel. Mater. Sci. Eng., A 604, 117 (2014).Google Scholar
Xu, D., Zhu, M.Y., Tang, Z.Y., and Sun, C.: Determination of the dynamic recrystallization kinetics model for SCM435 steel. J. Wuhan. Univ. Technol., Mater. Sci. Ed. 28, 819 (2013).Google Scholar
Liu, Y.G., Li, M.Q., and Luo, J.: The modelling of dynamic recrystallization in the isothermal compression of 300M steel. Mater. Sci. Eng., A 574, 1 (2013).Google Scholar
Mirzadeh, H. and Najafizadeh, A.: Prediction of the critical conditions for initiation of dynamic recrystallization. Mater. Des. 31, 1174 (2010).CrossRefGoogle Scholar
Xu, Y.W., Tang, D., Song, Y., and Pan, X.G.: Dynamic recrystallization kinetics model of X70 pipeline steel. Mater. Des. 39, 168 (2012).Google Scholar
Mandal, S., Sivaprasad, P.V., and Dube, R.K.: Modeling microstructural evolution during dynamic recrystallization of Alloy D9 using artificial neural network. J. Mater. Eng. Perform. 16, 672 (2007).CrossRefGoogle Scholar
Momeni, A. and Dehghani, K.: Prediction of dynamic recrystallization kinetics and grain size for 410 martensitic stainless steel during hot deformation. Met. Mater. Int. 16, 843 (2010).Google Scholar
Ebrahimi, G.R., Keshmiri, H., Momeni, A., and Mazinani, M.: Dynamic recrystallization behavior of a superaustenitic stainless steel containing 16%Cr and 25%Ni. Mater. Sci. Eng., A 528, 7488 (2011).Google Scholar
Stewart, G.R., Jonas, J.J., and Montheillet, F.: Kinetics and critical conditions for the initiation of dynamic recrystallization in 304 stainless steel. ISIJ Int. 44, 1581 (2004).Google Scholar
Marchattiwar, A., Sarkar, A., Chakravartty, J.K., and Kashyap, B.P.: Dynamic recrystallization during hot deformation of 304 austenitic stainless steel. J. Mater. Eng. Perform. 22, 2168 (2013).Google Scholar
Ohadi, D., Parsa, M.H., and Mirzadeh, H.: Development of dynamic recrystallization maps based on the initial grain size. Mater. Sci. Eng., A 565, 90 (2013).Google Scholar
Ebrahimi, G.R., Keshmiri, H., Maldad, A.R., and Momeni, A.: Dynamic recrystallization behavior of 13%Cr martensitic stainless steel under hot working condition. J. Mater. Sci. Technol. 28, 467 (2012).Google Scholar
El Wahabi, M., Gavard, L., Montheillet, F., Cabrera, J.M., and Prado, J.M.: Effect of initial grain size on dynamic recrystallization in high purity austenitic stainless steels. Acta Mater. 53, 4605 (2005).Google Scholar
Ji, G.L., Li, Q., and Li, L.: The kinetics of dynamic recrystallization of Cu–0.4Mg alloy. Mater. Sci. Eng., A 586, 197 (2013).Google Scholar
Changizian, P., Zarei-Hanzaki, A., and Abedi, H.R.: On the recrystallization behavior of homogenized AZ81 magnesium alloy: The effect of mechanical twins and γ precipitates. Mater. Sci. Eng., A 558, 44 (2012).Google Scholar
Zhang, D.X., Yang, X.Y., Sun, H., Li, Y., Wang, J., Zhang, Z.R., Ye, Y.X., and Sakai, T.: Dynamic recrystallization behaviors and the resultant mechanical properties of a Mg–Y–Nd–Zr alloy during hot compression after aging. Mater. Sci. Eng., A 640, 51 (2015).Google Scholar
Xu, T.C., Peng, X.D., Qin, J., Chen, Y.F., Yang, Y., and Wei, G.B.: Dynamic recrystallization behavior of Mg–Li–Al–Nd duplex alloy during hot compression. J. Alloys Compd. 639, 79 (2015).Google Scholar
Xiao, H.C., Jiang, S.N., Tang, B., Hao, W.H., Gao, Y.H., Chen, Z.Y., and Liu, C.M.: Hot deformation and dynamic recrystallization behaviors of Mg–Gd–Y–Zr alloy. Mater. Sci. Eng., A 628, 311 (2015).Google Scholar
Lv, B.J., Peng, J., Shi, D.W., Tang, A.T., and Pan, F.S.: Constitutive modeling of dynamic recrystallization kinetics and processing maps of Mg–2.0Zn–0.3Zr alloy based on true stress–strain curves. Mater. Sci. Eng., A 560, 727 (2013).Google Scholar
Cui, N., Kong, F.T., Wang, X.P., Chen, Y.Y., and Zhou, H.T.: Hot deformation behavior and dynamic recrystallization of a β-solidifying TiAl alloy. Mater. Sci. Eng., A 652, 231 (2016).Google Scholar
Tan, K., Li, J., Guan, Z.J., Yang, J.B., and Shu, J.X.: The identification of dynamic recrystallization and constitutive modeling during hot deformation of Ti55511 titanium alloy. Mater. Des. 84, 204 (2015).CrossRefGoogle Scholar
Ning, Y.Q., Yao, Z.K., Fu, M.W., and Guo, H.Z.: Recrystallization of the hot isostatic pressed nickel-base superalloy FGH4096: I. Microstructure and mechanism. Mater. Sci. Eng., A 528, 8065 (2011).Google Scholar
Zhang, H.B., Zhang, K.F., Zhou, H.P., Lu, Z., Zhao, C.H., and Yang, X.L.: Effect of strain rate on microstructure evolution of a nickel-based superalloy during hot deformation. Mater. Des. 80, 51 (2015).Google Scholar
Chen, X.M., Lin, Y.C., Wen, D.X., Zhang, J.L., and He, M.: Dynamic recrystallization behavior of a typical nickel-based superalloy during hot deformation. Mater. Des. 57, 568 (2014).CrossRefGoogle Scholar
Lin, Y.C., Wu, X.Y., Chen, X.M., Chen, J., Wen, D.X., Zhang, J.L., and Li, L.T.: EBSD study of a hot deformed nickel-based superalloy. J. Alloys Compd. 640, 101 (2015).Google Scholar
Lin, Y.C., He, D.G., Chen, M.S., Chen, X.M., Zhao, C.Y., Ma, X., and Long, Z.L.: EBSD analysis of evolution of dynamic recrystallization grains and δ phase in a nickel-based superalloy during hot compressive deformation. Mater. Des. 97, 13 (2016).CrossRefGoogle Scholar
Chen, M.S., Lin, Y.C., Li, K.K., and Zhou, Y.: A new method to establish dynamic recrystallization kinetics model of a typical solution-treated Ni-based superalloy. Comput. Mater. Sci. 122, 150 (2016).Google Scholar
Riedel, H. and Svoboda, J.: A model for strain hardening, recovery, recrystallization and grain growth with applications to forming processes of nickel base alloys. Mater. Sci. Eng., A 665, 175 (2016).Google Scholar
Wu, H.Y., Du, L.X., and Liu, X.H.: Dynamic recrystallization and precipitation behavior of Mn–Cu–V weathering steel. J. Mater. Sci. Technol. 27, 1131 (2011).Google Scholar
Hallberg, H., Svendsen, B., Kayser, T., and Ristinmaa, M.: Microstructure evolution during dynamic discontinuous recrystallization in particle-containing Cu. Comput. Mater. Sci. 84, 327 (2014).Google Scholar
Mejía, I., Bedolla-Jacuinde, A., Maldonado, C., and Cabrera, J.M.: Determination of the critical conditions for the initiation of dynamic recrystallization in boron microalloyed steels. Mater. Sci. Eng., A 528, 4133 (2011).Google Scholar
Quan, G.Z., Pu, S.A., Wen, H.R., Zou, Z.Y., and Zhou, J.: Quantitative analysis of dynamic softening behaviors induced by dynamic recrystallization for Ti–10V–2Fe–2Al alloy. High Temp. Mater. Process. 34, 549 (2015).Google Scholar
Jonas, J.J., Quelennec, X., Jiang, L., and Martin, É.: The Avrami kinetics of dynamic recrystallization. Acta Mater. 57, 2748 (2009).Google Scholar
Liu, J., Cui, Z., and Ruan, L.: A new kinetics model of dynamic recrystallization for magnesium alloy AZ31B. Mater. Sci. Eng., A 529, 300 (2011).Google Scholar
Won Lee, H. and Im, Y.T.: Numerical modeling of dynamic recrystallization during nonisothermal hot compression by cellular automata and finite element analysis. Int. J. Mech. Sci. 52, 1277 (2010).Google Scholar
Xu, Y., Hu, L.X., and Sun, Y.: Deformation behaviour and dynamic recrystallization of AZ61 magnesium alloy. J. Alloys Compd. 580, 262 (2013).Google Scholar
Li, J.B., Liu, Y., Wang, Y., Liu, B., and He, Y.H.: Dynamic recrystallization behavior of an as-cast TiAl alloy during hot compression. Mater. Charact. 97, 169 (2014).Google Scholar
Jia, J.B., Zhang, K.F., and Lu, Z.: Dynamic recrystallization kinetics of a powder metallurgy Ti–22Al–25Nb alloy during hot compression. Mater. Sci. Eng., A 607, 630 (2014).Google Scholar
Wei, H.L., Liu, G.Q., Xiao, X., and Zhang, M.H.: Dynamic recrystallization behavior of a medium carbon vanadium microalloyed steel. Mater. Sci. Eng., A 573, 215 (2013).Google Scholar
Cheng, L., Chang, H., Tang, B., Kou, H.C., and Li, J.S.: Deformation and dynamic recrystallization behavior of a high Nb containing TiAl alloy. J. Alloys Compd. 552, 363 (2013).Google Scholar
OuYang, D.L., Fu, M.W., and Lu, S.Q.: Study on the dynamic recrystallization behavior of Ti-alloy Ti–10V–2Fe–3V in β processing via experiment and simulation. Mater. Sci. Eng., A 619, 26 (2014).Google Scholar
Li, X.C., Duan, L.L., Li, J.W., and Wu, X.C.: Experimental study and numerical simulation of dynamic recrystallization behavior of a micro-alloyed plastic mold steel. Mater. Des. 66, 309 (2015).Google Scholar