Hostname: page-component-586b7cd67f-gb8f7 Total loading time: 0 Render date: 2024-11-23T12:31:48.239Z Has data issue: false hasContentIssue false
  • English
  • Français

Quantifying the progression of dynamic recrystallization in severe shear deformation at high strain rates

Published online by Cambridge University Press:  01 August 2013

Sepideh Abolghasem ,
Saurabh Basu  and
M. Ravi Shankar
Sepideh Abolghasem
Affiliation:
Swanson School of Engineering, Department of Industrial Engineering, University of Pittsburgh, Pittsburgh, Pennsylvania 15261
Saurabh Basu
Affiliation:
Swanson School of Engineering, Department of Industrial Engineering, University of Pittsburgh, Pittsburgh, Pennsylvania 15261
M. Ravi Shankar*
Affiliation:
Swanson School of Engineering, Department of Industrial Engineering, University of Pittsburgh, Pittsburgh, Pennsylvania 15261
*
a)Address all correspondence to this author. e-mail: [email protected]
Get access

Abstract

This paper examines the onset and progression of dynamic recrystallization (DRX) phenomena under shear deformation conditions characterized by strains >1 and strain rates >102/s by purposing large strain machining (LSM) as a test of microstructure response. To accomplish this, samples are created using LSM while characterizing the deformation using digital image correlation and infrared thermography. Microstructural consequences resulting from the characterized thermomechanical conditions are examined using electron backscattered diffraction. The progression of DRX is measured by identifying the threshold of grain orientation spread demarcating the onset of recrystallization and utilizing this threshold to segregate the microstructure and quantify the extent of DRX. A model for the onset of DRX as a function of thermomechanics of deformation is presented. This characterization can help understand surface microstructures resulting from shear-based manufacturing processes, such as turning, milling, shaping, etc., that are created under analogous thermomechanical conditions.

Type
Articles
Information
Journal of Materials Research , Volume 28 , Issue 15 , 14 August 2013 , pp. 2056 - 2069
Copyright
Copyright © Materials Research Society 2013 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Mishra, A., Kad, B.K., Gregori, F., and Meyers, M.A.: Microstructural evolution in copper subjected to severe plastic deformation: Experiments and analysis. Acta Mater. 55(1), 13 (2007).CrossRefGoogle Scholar
Valiev, R.Z. and Langdon, T.G.: Principles of equal-channel angular pressing as a processing tool for grain refinement. Prog. Mater. Sci. 51(7), 881 (2006).CrossRefGoogle Scholar
Kawasaki, M., Ahn, B., and Langdon, T.G.: Microstructural evolution in a two-phase alloy processed by high-pressure torsion. Acta Mater. 58(3), 919 (2010).CrossRefGoogle Scholar
Kuzel, R., Janecek, M., Matej, Z., Cizek, J., Dopita, M., and Srba, O.: Microstructure of equal-channel angular pressed Cu and cu-Zr samples studied by different methods. Metall. Mater. Trans. A 41(5), 1174 (2010).CrossRefGoogle Scholar
Shankar, M.R., Rao, B.C., Lee, S., Chandrasekar, S., King, A.H., and Compton, W.D.: Severe plastic deformation (SPD) of titanium at near-ambient temperature. Acta Mater. 54(14), 3691 (2006).CrossRefGoogle Scholar
Amouyal, Y., Divinski, S.V., Klinger, L., and Rabkin, E.: Grain boundary diffusion and recrystallization in ultrafine grain copper produced by equal channel angular pressing. Acta Mater. 56(19), 5500 (2008).CrossRefGoogle Scholar
Molodova, X., Gottstein, G., Winning, M., and Hellmig, R.J.: Thermal stability of ECAP processed pure copper. Mater. Sci. Eng., A 460–461(15), 204 (2007).CrossRefGoogle Scholar
Gottstein, G.: Physikalische Grundlagen der Metallkunde, 2nd ed. (Springer, Berlin, Germany, 2001).CrossRefGoogle Scholar
Cahn, R.W. and Haasen, P.: Physical Metallurgy, Part 2, 3rd ed. (Physics Publishing, North Holland, 1983).Google Scholar
Humphreys, F.J. and Hatherly, M.: Recrystallization and Related Annealing Phenomena, 2nd ed. (Elsevier Science Ltd, London, 2002).Google Scholar
Sakai, T. and Jonas, J.J.: Overview no. 35 dynamic recrystallization: Mechanical and microstructural considerations. Acta Metall. 32(2), 189 (1984).CrossRefGoogle Scholar
Montheillet, F. and Le Coze, J.: Influence of purity on the dynamic recrystallization of metals and alloys. Phys. Status Solidi A 189(1), 51 (2002).3.0.CO;2-M>CrossRefGoogle Scholar
Andrade, U., Meyers, M.A., Vecchio, K.S., and Chokshi, A.H.: Dynamic recrystallization in high-strain, high-strain-rate plastic deformation of copper. Acta Metall. Mater. 42(9), 3183 (1994).CrossRefGoogle Scholar
Nicholas, T.: Tensile testing at high rates of strain. Exp. Mech. 21, 177 (1981).CrossRefGoogle Scholar
Lindholm, S., Nagy, A., Johnson, G.R., and Hoegfeldt, J.M.: Large strain, high strain rate testing of copper. J. Eng. Mater. Technol. 102(4), 376 (1980).CrossRefGoogle Scholar
Gray, G.T. III: Mechanical Testing and Evaluation, 10th ed. (ASM Handbook, Ohio, 2000).Google Scholar
McQueen, H.J. and Bergerson, S.: Dynamic recrystallization of copper during hot torsion. Met. Sci. 6, 25 (1972).CrossRefGoogle Scholar
McQueen, H.J.: Materials Technology (An Inter-American Approach ASME, New York, 1968), pp. 379, 388.Google Scholar
Jonas, J.J., Sellars, C.M., and Tegart, W.J.McG.: Strength and structure under hot-working conditions. Metall. Rev. 14, 1 (1969).CrossRefGoogle Scholar
Sellars, C.M. and Tegart, W.J.McG.: On the mechanism of hot deformation. Acta Metall. 14(9), 1136 (1966).CrossRefGoogle Scholar
Sah, J.P., Richardson, G.J., and Sellars, C.M.: Recrystallization during hot deformation of Nickel. J. Aust. Inst. Met. 14, 292 (1969).Google Scholar
Hines, J.A. and Vecchiot, K.S.: Recrystallization kinetics within adiabatic shear bands. Acta Mater. 45(2), 635 (1997).CrossRefGoogle Scholar
Xu, Y.B., Zhong, W.L., Chen, Y.J., Shen, L.T., Liu, Q., Bai, Y.L., and Meyers, M.A.: Shear localization and recrystallization in dynamic deformation of 8090 Al–Li alloy. Mater. Sci. Eng., A 299, 287 (2001).CrossRefGoogle Scholar
Meyers, M.: Dynamic Behavior of Materials (John Wiley & Sons, New York, 1994).CrossRefGoogle Scholar
Meyers, M.A., Subhash, G., Kad, B.K., and Prasad, L.: Evolution of microstructure and shear-band formation in α-hcp titanium. Mech. Mater. 17, 175 (1994).CrossRefGoogle Scholar
Chokshi, A.H. and Meyers, M.A.: The prospects for superplasticity at high strain rates: Preliminary considerations and an example. Scr. Metall. Mater. 24, 605 (1990).CrossRefGoogle Scholar
Shekhar, S., Cai, J., Basu, S., Abolghasem, S., and Shankar, M.R.: Effect of strain-rate in severe plastic deformation on microstructure refinement and stored energies. J. Mater. Res. 26, 395 (2011).CrossRefGoogle Scholar
Akbari, G.H., Sellars, C.M., and Whiteman, J.A.: Microstructural development during warm rolling of an if steel. Acta Mater. 45(12), 5047 (1997).CrossRefGoogle Scholar
Baxter, G.J., Dulv, D., Orsetti Rossi, P.L., Sellars, C.M., Whiteman, J.A., Shercliff, H.R., and Ashby, M.F.: Microstructural and crystallographic aspects of recrystallization. In 16th Riso International Symposium on Material Science, Microstructural and Crystallographic Aspects of Recrystallization, edited by Hansen, N., Liu, Y.L., Jensen, D.J., and Ralph, B. (RISO National Laboratory, Roskilde, 1995), p. 267.Google Scholar
Haessner, I. and Hofmann, S.: Recrystallization of Metallic Materials (Riederer Verlag, Stuttgart, Germany, 1978).Google Scholar
Gerber, P., Tarasiuk, J., Chauveau, T., and Bacroix, B.: A quantitative analysis of the evolution of texture and stored energy during annealing of cold rolled copper. Acta Mater. 51(20), 6359 (2003).CrossRefGoogle Scholar
Mitsche, S., Poelt, P., and Sommitsch, C.: Recrystallization behaviour of the nickel-based alloy 80 A during hot forming. J. Microsc. 227(3), 267 (2007).CrossRefGoogle ScholarPubMed
Tarasiuk, J., Gerber, P., and Bacroix, B.: Estimation of recrystallized volume fraction from EBSD data. Acta Mater. 50, 1467 (2002).CrossRefGoogle Scholar
Poelt, P., Sommitsch, C., Mitsche, S., and Walter, M.: Dynamic recrystallization of Ni-base alloys—experimental results and comparisons with simulations. Mater. Sci. Eng., A 420, 306 (2006).CrossRefGoogle Scholar
Humphreys, F.J.: Review grain and subgrain characterisation by electron backscatter diffraction. J. Mater. Sci. 36, 3833 (2001).CrossRefGoogle Scholar
McNelley, T.R., Zhilyaev, A.P., Swaminathan, S., Su, J., and Sarath Menon, E.: Application of EBSD methods to severe plastic deformation (SPD) and related processing methods. Chapter in Electron Backscatter Diffraction in Materials Science, edited by Schwartz, A.J., Kumar, M., Adams, B.L. and Field, D.P. (Kluwer Academic Plenum Publishers, New York, 2000).Google Scholar
Cheong, S. and Weiland, H.: Understanding a microstructure using GOS (grain orientation spread) and its application to recrystallization study of hot deformed Al-Cu-Mg alloys. Mater. Sci. Forum 558–559, 153 (2007).CrossRefGoogle Scholar
Lim, C.V.S.: Length scale effect on the microstructure evolution of Cu Layers in a Roll-Bonded CuNb composite, Ph.D. Thesis, Carnegie Mellon University, Pittsburgh, PA, 2008.Google Scholar
Alvi, M.H., El-Dasher, B.S., and Rollett, A.D.: Hot deformation of aluminum alloys III. ed. Jin, Z., Beaudoin, A., Bieler, T., and Radhakrishnan, B. (TMS, Warrendale, PA (2003)), p. 3, 12.Google Scholar
Vandermeer, R.A. and Juul Jensen, D.: Recrystallization in hot vs cold deformed commercial aluminum: A microstructure path comparison. Acta Mater. 51, 3005 (2003).CrossRefGoogle Scholar
Alvi, M.H., Cheong, S., Weiland, H., and Rollett, A.D.: 1st International Symposium of Metallurgical Modelling of Aluminum Alloys, Pittsburgh, PA, 2003; p. 183.Google Scholar
Alvi, M.H., Cheong, S., Weiland, H., and Rollett, A.D.: Recrystallization and texture development in hot rolled 1050 aluminum. Mater. Sci. Forum 467–470, 357 (2004).CrossRefGoogle Scholar
Mitsche, S., Poelt, P., Sommitsch, C., and Walter, M.: Quantification of the recrystallized fraction in a nickel-base-alloy from EBSD-data. Microsc. Microanal. 9, 344 (2003).CrossRefGoogle Scholar
Mitsche, S., Sommitsch, C., Pölt, P., and Kleber, S.: Recrystallization Behaviour of the Nickel based alloy 80 A during hot forming (Proc. 13th Conf. And Workshop on electron backscatter diffraction, University of Oxford, United Kingdom, Royal Microscopical Society (RMS), 2006).Google Scholar
Abolghasem, S., Basu, S., Shekhar, S., Cai, J., and Shankar, M.R.: Mapping subgrain sizes resulting from severe simple shear deformation. Acta Mater. 60, 376 (2012).CrossRefGoogle Scholar
Kuhlmann-Wilsdorf, D.: A critical test on theories of work-hardening for the case of drawn iron wire. Met. Trans. 1, 3173 (1970).CrossRefGoogle Scholar
Kuhlmann-Wilsdorf, D.: Work hardenning in tension and fatigue, in edited by Thompson, A.W. (The Metallurgical Society of AIME: New York, 1977).Google Scholar
Nes, E.: Modeling of work hardening and stress saturation in FCC metals. Prog. Mater. Sci. 41, 129 (1998).CrossRefGoogle Scholar
Oxley, P.L.B. and Hasting, W.F.: Predicting the strain rate in the zone of intense shear in which the chip is formed in machining from the dynamic flow stress properties of the work material and the cutting conditions. Proc. R. Soc. London, Ser. A 356, 395 (1977).Google Scholar
Lee, S., Hwang, J., Shankar, M.R., Chandrasekar, S., and Compton, W.D.: Large strain deformation field in machining. Metall. Mater. Trans. A 37, 1633 (2006).CrossRefGoogle Scholar
Raybould, D. and Sheppard, T.: Axisymmetric extrusion: The effect of temperature rise and strain rate on the activation enthalpy and material constants of some aluminum alloys and their relation to recrystallization, substructure and subsequent mechanical properties. J. Inst. Met. Mar. 101, 65 (1973).Google Scholar
Swaminathan, S., Shankar, M.R., Rao, B.C., Compton, W.D., Chandrasekar, S., King, A.H., and Trumble, K.P.: Severe plastic deformation (SPD) and nanostructured materials by machining. J. Mater. Sci. 42, 1529 (2007).CrossRefGoogle Scholar
Campbell, C.E., Bendersky, L.A., Boettinger, W.J., and Ivester, R.: Microstructural characterization of Al-7075-T651 chips and work pieces produced by high-speed machining. Mater. Sci. Eng., A 430, 15 (2006).CrossRefGoogle Scholar
Cerreta, E.K., Frank, I.J., Gray, G.T. III, Trujillo, C.P., Korzekwa, D.A., and Dougherty, L.M.: The influence of microstructure on the mechanical response of copper in shear. Mater. Sci. Eng. 501(1), 207 (2009).CrossRefGoogle Scholar
Adibi-Sedeh, A.H., Madhavan, V., and Bahr, B.J.: Extension of oxley’s analysis of machining to use different material models. J. Manuf. Sci. Eng. 125, 656 (2003).CrossRefGoogle Scholar
Shekhar, S., Cai, J., Basu, S., Abolghasem, S., and Shankar, M.R.: Effect of severe plastic deformation in machining elucidated via rate-strain-microstructure mappings. J. Manuf. Sci. Eng. 134, 31008–31011 (2012).CrossRefGoogle Scholar
Zener, C. and Hollomon, J.H.: Effect of strain rate upon plastic flow of steel. J. Appl. Phys. 15, 22 (1944).CrossRefGoogle Scholar
Zhao, W.S., Tao, N.R., Guo, J.Y., Lu, Q.H., and Lu, K.: High density nano-scale twins in Cu induced by dynamic plastic deformation. Scr. Mater. 53, 745 (2005).CrossRefGoogle Scholar
Ma, Z.Y. and Tjong, S.C.: High temperature creep behavior of in-situ TiB2 particulate reinforced copper-based composite. Mater. Sci. Eng., A 284, 70 (2000).CrossRefGoogle Scholar
Randle, V. and Engler, O.: Introduction to texture analysis: Macrotexture, microtexture and orientation mapping (Gordon and Breach Science Publishers, Amsterdam, 2000).CrossRefGoogle Scholar
Gao, H. and Huang, Y.: Geometrically necessary dislocation and size-dependent plasticity. Scr. Mater. 48, 113 (2003).CrossRefGoogle Scholar
Wright, S.I.: Proceedings of the 12th International Conference on Textures. Montreal, Canada (1999), p. 104, 109.Google Scholar
Alvi, M.H.: Recrystallization kinetics and microstructural evolution in hot rolled aluminum alloys. Ph.D. Thesis, Carnegie Mellon University, Pittsburgh, PA, 2005.Google Scholar
Jazaeri, H. and Humphreys, F.J.: Quantifying recrystallization by electron backscatter diffraction. J. Microsc. 213, 241 (2003).CrossRefGoogle Scholar
Engler, O. and Huh, M.: Evolution of the cube texture in high purity aluminum capacitor foils by continuous recrystallization and subsequent grain growth. Mater. Sci. Eng., A 271, 371 (1999).CrossRefGoogle Scholar
Jazaeri, H. and Humphreys, F.J.: The effect of initial grain size on transition from discontinuous to continuous recrystallization in a highly cold rolled Al–Fe–Mn alloy. Mater. Sci. Forum 396, 551 (2002).CrossRefGoogle Scholar
Ahlborn, H., Hornbogen, E., and Koster, U.: Recrystallisation mechanism and annealing texture in aluminium-copper alloys. J. Mater. Sci. 4, 944 (1969).CrossRefGoogle Scholar
Abrams, H.: Grain size measurement by the intercept method. Metallography 4, 59 (1971).CrossRefGoogle Scholar