Hostname: page-component-586b7cd67f-tf8b9 Total loading time: 0 Render date: 2024-11-24T16:51:26.116Z Has data issue: false hasContentIssue false
  • English
  • Français

Experimental investigation and thermodynamic modeling of the ternary Al–Cu–Fe system

Published online by Cambridge University Press:  31 January 2011

Hai-Lin Chen ,
Yong Du ,
Honghui Xu  and
Wei Xiong
Yong Du*
Affiliation:
State Key Lab of Powder Metallurgy, Central South University, Changsha 410083, People’s Republic of China
Wei Xiong
Affiliation:
State Key Lab of Powder Metallurgy, Central South University, Changsha 410083, People’s Republic of China
*
a) Address all correspondence to this author. e-mail: [email protected]
Get access

Abstract

The constitution of the ternary system Al–Cu–Fe in the region above 40 at.% Al at 600 °C is investigated by means of x-ray diffraction, metallography, scanning electron microanalysis, energy dispersive x-ray spectroscopy, and differential thermal analysis. The phase equilibria in the Al-rich corner are clarified by the valuable experimental evidence for the four-phase reaction L + λFe4Al13 ↔ (Al) + ω at 600.7 °C and experimental findings that the phase αFe4CuAl23 was not detected. A thermodynamic model of the Al–Cu–Fe system was then performed over the entire composition range by taking into account the phase diagram data above 560 °C from the literature and the present work. This work challenged the modeling of the considerably complex order–disorder phase transition between bcc_A2 and bcc_B2 phases and the miscibility gap of bcc_B2 phase using the modified sublattice model.

Keywords

Phase equilibriaScanning electron microscopy (SEM)X-ray diffraction (XRD)
Type
Articles
Information
Journal of Materials Research , Volume 24 , Issue 10 , October 2009 , pp. 3154 - 3164
Copyright
Copyright © Materials Research Society 2009

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Tsai, A.P., Inoue, A., and Masumoto, T.: A stable quasicrystal in Al–Cu–Fe system. Jpn. J. Appl. Phys. 26(9), L1505 (1987).CrossRefGoogle Scholar
2.Calvayrac, Y., Quivy, A., Bessiere, M., Lefebvre, S., Cornier-Quiquandon, M., and Gratias, D.: Icosahedral AlCuFe alloys: Towards ideal quasicrystals. J. Phys. 51, 417 (1990).CrossRefGoogle Scholar
3.Bradley, A.J. and Goldschmidt, H.J.: An x-ray study of slower cooled Fe–Cu–Al alloys. Part II. Alloys rich in aluminum. J. Inst. Met. 65, 403 (1939).Google Scholar
4.Yamamoto, A., Takakura, H., and Tsai, A.P.: Refinement of i-Al– Cu–Fe and i-Al–Cu–Ru quasicrystal structures. Ferroelectrics 305, 279 (2004).CrossRefGoogle Scholar
5.Steurer, W.: Structural phase transitions from and to the quasicrystalline state. Acta Crystallogr., Sect. A: Found. Crystallogr. 61(1), 28 (2005).CrossRefGoogle Scholar
6.Huttunen-Saarivirta, E.: Microstructure, fabrication and properties of quasi-crystalline Al–Cu–Fe alloys: A review. J. Alloys Compd. 363(1–2), 154 (2004).CrossRefGoogle Scholar
7.Wehner, B.I., Köster, U., Rüdiger, A., Pieper, C., and Sordelet, D.J.: Oxidation of Al–Cu–Fe and Al–Pd–Mn quasicrystals. Mater. Sci. Eng. 294–296, 830 (2000).Google Scholar
8.Wang, C.P., Liu, X.J., Zhang, L.M., and Ishida, K.: Aluminumcopper-iron, in Landolt-Börnstein, New Series IV/11A2, edited by Effenberg, G. and Ilyenko, S. (Springer-Verlag, Berlin, Heidelberg, Germany, 2005), p. 1.Google Scholar
9.Raghavan, V.: Aluminum–copper–iron. J. Phase Equilib. Diffus. 26(1), 59 (2005).CrossRefGoogle Scholar
10.Wang, C.P., Liu, X.J., Ohnuma, I., Kainuma, R., Hao, S.M., and Ishida, K.: Ordering and phase separation of the bcc phase in the Fe–Cu–Al system. Z. Metallkd. 89(12), 828 (1998).Google Scholar
11.Miettinen, J.: Thermodynamic description of the Cu–Al–Fe system at the Cu–Fe side. Calphad 27(1), 91 (2003).CrossRefGoogle Scholar
12.Bown, M.G. and Brown, P.J.: The structure of FeCu2Al7 and τ(CoCuAl). Acta Crystallogr. 9, 911 (1956).CrossRefGoogle Scholar
13.Phragmen, G.: On the phases occurring in alloys of Al with Cu, Mg, Mn, Fe and Si. J. Inst. Met. 77, 489 (1950).Google Scholar
14.Prevarskiy, A.P.: Investigation of Fe–Cu–Al alloys. Russ. Metall. 4, 154 (1971).Google Scholar
15.Zhang, L.M. and Lück, R.: Phase diagram of the Al–Cu–Fe quasicrystal alloy system. I. Liquid surface and equilibria with liquid. Z. Metallkd. 94(2), 91 (2003).CrossRefGoogle Scholar
16.Zhang, L.M. and Lück, R.: Phase diagram of the Al–Cu–Fe quasicrystal-forming alloy system. IV. Formation and stability of the phi-Al10Cu10Fe1 phase. Z. Metallkd. 94(3), 341 (2003).CrossRefGoogle Scholar
17.Gayle, F.W., Sharpiro, A.J., Biancaniello, F.S., and Boettinger, W.J.: The Al–Cu–Fe phase diagram: 0–25 at.% iron and 50 75 at.% aluminum-equilibria involving the icosahedral phase. Metall. Trans. A 23(9), 2409 (1992).CrossRefGoogle Scholar
18.Black, P.J., Edward, O.S., and Forsyth, J.B.: The structure of alpha-(AlCuFe). Acta Crystallogr. 14, 993 (1961).CrossRefGoogle Scholar
19.Ohtani, H., Suda, H., and Ishida, K.: Solid/liquid equilibria in Fe– Cu based ternary systems. ISIJ Int. 37(3), 207 (1997).CrossRefGoogle Scholar
20.Zhang, L.M. and Lück, R.: Phase diagram of the Al–Cu–Fe quasicrystal-forming alloy system. III. Isothermal sections. Z. Metallkd. 94(2), 108 (2003).CrossRefGoogle Scholar
21.Gayle, F.W., Sharpiro, A.J., Biancaniello, F.S., and Boettinger, W.J.: The Al–Cu–Fe phase diagram: 0–25 at.% iron and 50–75 at.% aluminum equilibria involving the icosahedral phase. Metall. Trans. A 23(9), 2409 (1992).CrossRefGoogle Scholar
22.Gayle, F.W.: Phase equilibria at 550 °C in the Al–Cu–Fe system: 50–70 at.% Al, 0–9 at.% Fe. J. Phase Equilib. 13(6), 619 (1992).CrossRefGoogle Scholar
23.Gratias, D., Calvayrac, Y., Devaud-Rzepski, J., Faudot, F., Harmelin, M., Quivy, A., and Bancel, P.A.: The phase diagram and structures of the ternary Al–Cu–Fe system in the vicinity of the icosahedral region. J. Non-Cryst. Solids 153–154, 482 (1993).Google Scholar
24.Rosas, G. and Perez, R.: On the relationships between isothermal phase diagrams and quasicrystalline phase transformations in AlCuFe alloys. Mater. Sci. Eng., A 298, 79 (2001).CrossRefGoogle Scholar
25.Phillips, H.W.L.: The constitution of alloys of aluminum, copper and iron. J. Inst. Met. 82, 197 (1954).Google Scholar
26.Nishimura, H. and Hisatsune, C.: The constitution of the copperrich alloys of the copper–aluminum–iron system. Nippon Kinzoku Gakkai Shi 2, 597 (1938).Google Scholar
27.Yutaka, A.: The equilibrium diagram of the iron-bearing aluminum bronzes. J. Jpn. Inst. Met. 5, 136 (1941).CrossRefGoogle Scholar
28.Massalski, T.B.: Binary Alloys Phase Diagram, 2nd ed. (ASM International, Materials Park, OH, 1990).Google Scholar
29.Saunders, N.: Al–Cu, in COST 507-Thermochemical Database for Light Metal Alloys, vol. 2, edited by Ansara, I., Dinsdale, A.T., and Rand, M.H. (Office for Official Publications of the European Communities, Luxembourg, 1998), p. 28.Google Scholar
30.Seierstein, M.: Al–Fe, in COST 507-Thermochemical Database for Light Metal Alloys, vol. 2, edited by Ansara, I., Dinsdale, A.T., and Rand, M.H. (Office for Official Publications of the European Communities, Luxembourg, 1998), p. 34.Google Scholar
31.Ansara, I. and Jansson, A.: Cu–Fe, in COST 507-Thermochemical Database for Light Metal Alloys, vol. 2, edited by Ansara, I., Dinsdale, A.T., and Rand, M.H. (Office for Official Publications of the European Communities, Luxembourg, 1998), p. 165.Google Scholar
32.Griger, A., Lendvai, A., and Stefaniay, V.: On the phase diagrams of the Al–Fe and Al–Fe–Si systems. Mater. Sci. Forum 13–14, 331 (1987).Google Scholar
33.Du, Y., Schuster, J.C., Liu, Z.K., Hu, R.X., Nash, P., Sun, W.H., Zhang, W.W., Wang, J., Zhang, L.J., Tang, C.Y., Zhu, Z.J., Liu, S.H., Ouyang, Y.F., Zhang, W.Q., and Krendelsberger, N.: A thermodynamic description of the Al–Fe–Si system over the whole composition and temperature ranges via a hybrid approach of CALPHAD and key experiments. Intermetallics 16(4), 554 (2008).CrossRefGoogle Scholar
34.Redlich, O. and Kister, A.T.: Algebraic representation of thermodynamic properties and the classification of solutions. Ind. Eng. Chem. 40, 345 (1948).CrossRefGoogle Scholar
35.Inden, G.: Report on Proc. Project Meeting, Calphad V (Max-Planck Institute for Metal Research, Düsseldorf, 1976), III, 4–1.Google Scholar
36.Hillert, M. and Jarl, M.: A model for alloying effects in ferromagnetic metals. Calphad 2, 227 (1978).CrossRefGoogle Scholar
37.Dupin, N. and Ansara, I.: On the sublattice formalism applied to the B2 phase. Z. Metallkd. 90, 76 (1999).Google Scholar
38.Dupin, N., Ansara, I., and Sundman, B.: Thermodynamic re-assessment of the ternary system Al–Cr–Ni. Calphad 25(2), 279 (2001).CrossRefGoogle Scholar
39.Sundman, B., Jansson, B., and Andersson, J.O.: The thermo-calc database system. Calphad 9, 153 (1985).CrossRefGoogle Scholar