Hostname: page-component-586b7cd67f-rcrh6 Total loading time: 0 Render date: 2024-12-01T01:07:19.906Z Has data issue: false hasContentIssue false
  • English
  • Français

Electrical resistance of Sn–Ag–Cu ball grid array packages with Sn–Zn–Bi addition jointed at 240 °C

Published online by Cambridge University Press:  03 March 2011

Po-Cheng Shih  and
Kwang-Lung Lin
Po-Cheng Shih*
Affiliation:
Department of Materials Science and Engineering, National Cheng-Kung University, Tainan, Taiwan 701, Republic of China
Kwang-Lung Lin
Affiliation:
Department of Materials Science and Engineering, National Cheng-Kung University, Tainan, Taiwan 701, Republic of China
*
a) Address all correspondence to this author. e-mail: [email protected]
Get access

Abstract

Sn–8Zn–3Bi solder paste and Sn–3.2Ag–0.5Cu solder balls were reflowed simultaneously at 240 °C on Cu/Ni/Au metallized ball grid array substrates. The joints without Sn–Zn–Bi addition (only Sn–Ag–Cu) were studied as a control system. Electrical resistance was measured after multiple reflows and aging. The electrical resistance of the joint (R1) consisted of three parts: the solder bulk (Rsolder bulk, upper solder highly beyond the mask), interfacial solder/intermetallic compound (Rsolder/IMC), and the substrate (Rsubstrate). R1 increased with reflows and aging time. Rsolder/IMC, rather than Rsolder bulk and Rsubstrate, seemed to increase with reflows and aging time. The increase of R1 was ascribed to the Rsolder/IMC rises. Rsubstrate was the major contribution to R1. However Rsolder/IMC dominated the increase of R1 with reflows and aging. R1 of Sn–Zn–Bi/Sn–Ag–Cu samples were higher than that of Sn–Ag–Cu samples in various tests.

Keywords

CompoundElectrical propertiesSoldering
Type
Articles
Information
Journal of Materials Research , Volume 22 , Issue 1 , January 2007 , pp. 113 - 123
Copyright
Copyright © Materials Research Society 2007

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1Huang, X., Lee, S-W.R., Yan, C.C., and Hui, S.: Characterization and analysis on the solder ball shear testing conditions, in Electronic Components and Technology Conference, 2001 Proceedings, pp.1065–1071.Google Scholar
2Chan, Y.C., Tu, P.L., Tang, C.W., Hung, K.C., and Lai, J.K.: Reliability studies of μBGA solder joints—Effect of Ni–Sn intermetallic compound. IEEE Trans. Adv. Packag. 24, 25 (2001).CrossRefGoogle Scholar
3Sugizaki, T., Nakao, H., Kimura, T., and Watanabe, T.: BGA jointing property of Sn–8.8 mass% Zn and Sn–8.0 mass% Zn–3.0 mass% Bi solder on electroless nickel-phosphorus/immersion gold plated substrates. Mater. Trans. 44, 1790 (2003).CrossRefGoogle Scholar
4Lee, C.B., Jung, S.B., Shin, Y.E., and Shur, C.C.: Effect of isothermal aging on ball shear strength in BGA joints with Sn– 3.5Ag–0.75Cu solder. Mater. Trans. 43, 1858 (2002).CrossRefGoogle Scholar
5Lee, C.B., Lee, I.Y., Jung, S.B., and Shur, C.C.: Effect of surface finishes on ball shear strength in BGA joints with Sn–3.5 mass% Ag solder. Mater. Trans. 43, 751 (2002).CrossRefGoogle Scholar
6Uenishi, K., Kohara, Y., Sakatani, S., Saeki, T., Kobayashi, K.F., and Yamamoto, M.: Melting and joining behavior of Sn/Ag and Sn–Ag/ Sn–Bi plating on Cu core ball. Mater. Trans. 43, 1833 (2002).CrossRefGoogle Scholar
7Nishiura, M., Nakayama, A., Sakatani, S., Kohara, Y., Uenishi, K., and Kobayashi, K.F.: Mechanical strength and microstructure of BGA joints using lead-free solders. Mater. Trans. 43, 1802 (2002).CrossRefGoogle Scholar
8Amagai, M., Watanabe, M., Omiya, M., Kishimoto, K., and Shibuya, T.: Mechanical characterization of Sn–Ag-based lead-free solders. Microelectron. Reliab. 42, 951 (2002).CrossRefGoogle Scholar
9Hirose, A., Fujii, T., Imamura, T., and Kobayashi, K.F.: Influence of interfacial reaction on reliability of QFP joints with Sn–Ag based Pb free solders. Mater. Trans. 42, 794 (2001).CrossRefGoogle Scholar
10Islam, R.A., Wu, B.Y., Alam, M.O., Chan, Y.C., and Jillek, W.: Investigations on microhardness of Sn–Zn based lead-free solder alloys as replacement of Sn–Pb solder. J. Alloys Compd. 392, 149 (2005).CrossRefGoogle Scholar
11Wu, J. and Pecht, M.G.: Contact resistance and fretting corrosion of lead-free alloy coated electrical contacts, in International IEEE Conference on Asian Green Electronics (AGEC) (2004), pp.127–135.Google Scholar
12Chonan, Y., Komiyama, T., Onuki, J., Urao, R., Kimura, T., and Nagano, T.: Influence of P content in electroless plated Ni–P alloy film on interfacial structures and strength between Sn–Zn solder and plated Au/Ni–P alloy film. Mater. Trans. 43(8), 1887 (2002).CrossRefGoogle Scholar
13Chuang, C.M., Shih, P.C., and Lin, K.L.: Mechanical strength of Sn–3.5Ag-based solders and related bondings. J. Electron. Mater. 33, 1 (2004).CrossRefGoogle Scholar
14Choi, J.W., Cha, H.S., and Oh, T.S.: Mechanical properties and shear strength of Sn–3.5Ag–Bi solder alloys. Mater. Trans. 43, 1864 (2002).CrossRefGoogle Scholar
15Kim, Y.S., Kim, K.S., Hwang, C.H., and Suganuma, K.: Effect of composition and cooling rate on microstructure and tensile properties of Sn–Zn–Bi alloys. J. Alloys Compd. 352, 237 (2003).CrossRefGoogle Scholar
16Shimokawa, H., Soga, T., and Serizawa, K.: Mechanical properties and microstructure of tin-silver-bismuth lead-free solder. Mater. Trans. 43, 1808 (2002).CrossRefGoogle Scholar
17Miyazawa, Y. and Ariga, T.: Influences of aging treatment on microstructure and hardness of Sn–(Ag, Bi, Zn) eutectic solder alloys. Mater. Trans. 42, 776 (2001).CrossRefGoogle Scholar
18Shih, P. C. and Lin, K. L.: Interfacial microstructure and shear behavior of Sn–Ag–Cu solder balls joined with Sn–Zn–Bi paste J. Alloys Compd. 422, 153 (2006).CrossRefGoogle Scholar
19Liao, C.N. and Wei, C.T.: Effect of intermetallic compound formation on electrical properties of Cu/Sn interface during thermal treatment. J. Electron. Mater. 33, 1137 (2004).CrossRefGoogle Scholar
20Cook, B.A., Anderson, I.E., Harringa, J.L., and Terpstra, R.L.: Effect of heat treatment on the electrical resistivity of near-eutectic Sn–Ag–Cu Pb-free solder alloys. J. Electron. Mater. 31, 1190 (2002).CrossRefGoogle Scholar
21Kang, S.K., Choi, W.K., Yim, M.J., and Shih, D.Y.: Studies of the mechanical and electrical properties of lead-free solder joints. J. Electron. Mater. 31, 1292 (2002).CrossRefGoogle Scholar
22Yoon, J.W., Kim, S.W., Koo, J.M., Kim, D.G., and Jung, S.B.: Reliability investigation and interfacial reaction of ball-grid-array packages using the lead-free Sn–Cu solder. J. Electron. Mater. 33, 1190 (2004).CrossRefGoogle Scholar
23Kim, S.W., Yoon, J.W., and Jung, S.B.: Interfacial reactions and shear strengths between Sn–Ag-based Pb-free solder balls and Au/EN/Cu metallization. J. Electron. Mater. 33, 1182 (2004).CrossRefGoogle Scholar
24Ghosh, G.: Interfacial reaction between multicomponent lead-free solders and Ag, Cu, Ni and Pd substrates. J. Electron. Mater. 33, 1080 (2004).CrossRefGoogle Scholar
25Lin, Y.L., Luo, W.C., Lin, Y.H., Ho, C.E., and Kao, C.R.: Effects of the gold thickness of the surface finish on the interfacial reactions in flip-chip solder joints. J. Electron. Mater. 33, 1092 (2004).CrossRefGoogle Scholar
26Jang, G.Y., Huang, C.S., Hsiao, L.Y., Duh, J.G., and Takahashi, H.: Mechanism of interfacial reaction for the Sn–Pb solder bump with Ni/Cu under-bump metallization in flip-chip technology. J. Electron. Mater. 33, 1118 (2004).CrossRefGoogle Scholar
27Massalski, T.B.: Binary Alloy Phase Diagrams (ASM, Metals Park, OH, 1986), p. 85.Google Scholar
28Song, J.M., Lan, G.F., Lui, T.S., and Chen, L.H.: Microstructure and tensile properties of Sn–9Zn–xAg lead-free solder alloys. Scripta Mater. 48, 1047 (2003).CrossRefGoogle Scholar
29Chang, T.C., Hsu, Y.T., Hon, M.H., and Wang, M.C.: Enhancement of the wettability and solder joint reliability at the Sn–9Zn–0.5Ag lead-free solder alloy–Cu interface by Ag precoating. J. Alloys Compd. 360, 217 (2003).CrossRefGoogle Scholar
30Shih, P.C. and Lin, K.L.: Interfacial bonding behavior with introduction of Sn–Zn–Bi paste to Sn–Ag–Cu BGA package during multiple reflows. J. Mater. Res. 20(1), 219 (2005).CrossRefGoogle Scholar
31Massalski, T.B.: Binary Alloy Phase Diagrams (ASM, Metals Park, OH, 1986), p. 540.Google Scholar
32Kang, S.K., Horkans, J., Andricacos, P.C., Carruthers, R.A., Cotte, J., Datta, M., Gruber, P., Harper, J.M.E., Kwietniak, K., Sambucetti, C., Shi, L., Brouillette, G., and Danovitch, D.: Pb-free solder alloys for flip chip applications, in Electronic Components and Technology Conference 1999 Proceedings, pp. 283–288.Google Scholar
33Frederikse, H.P.R., Fields, R.J., and Feldman, A.: Thermal and electrical properties of copper-tin and nickel-tin intermetallics. J. Appl. Phys. 72, 2879 (1992).CrossRefGoogle Scholar
34Seitz, F.: The Modern Theory of Solids (McGraw-Hill, New York, 1940), pp. 10–12.Google Scholar
35Handbook of Chemistry and Physics, 43rd edition (The Chemical Rubber Publishing Co.), pp. 2626–2633.Google Scholar
36Chiou, B.S., Liu, K.C., Duh, J.G., and Palanisamy, P.S.: Intermetallic formation on the fracture of Sn/Pb solder and Pd/Ag conductor interfaces, in IEEE Transactions on Components, Hybrids and Manufacturing Technology (1990), Vol. 13, pp. 267–274.CrossRefGoogle Scholar