Hostname: page-component-78c5997874-ndw9j Total loading time: 0 Render date: 2024-11-09T15:42:45.975Z Has data issue: false hasContentIssue false
  • English
  • Français

Casting properties of the high-strength AlZnMgCuNiSi alloys

Published online by Cambridge University Press:  31 January 2011

Dalibor Vojtěch ,
Elšad Tagiev ,
Čstmír Barta ,
Čestmír Barta Jr. ,
Jan Šerák ,
Petr Janda  and
Ondřej Eckert
Dalibor Vojtěch
Affiliation:
Institute of Chemical Technology, Department of Metals and Corrosion Engineering, Technická5, 166 28 Prague 6, Czech Republic
Elšad Tagiev
Affiliation:
Institute of Chemical Technology, Department of Metals and Corrosion Engineering, Technická5, 166 28 Prague 6, Czech Republic
Čstmír Barta
Affiliation:
Barta, Barta, Triska (BBT) Materials Processing, Doubická 11, 184 00 Prague 8, Czech Republic
Čestmír Barta Jr.
Affiliation:
Barta, Barta, Triska (BBT) Materials Processing, Doubická 11, 184 00 Prague 8, Czech Republic
Jan Šerák
Affiliation:
Institute of Chemical Technology, Department of Metals and Corrosion Engineering, Technická 5, 166 28 Prague 6, Czech Republic
Petr Janda
Affiliation:
Institute of Chemical Technology, Department of Metals and Corrosion Engineering, Technická 5, 166 28 Prague 6, Czech Republic
Ondřej Eckert
Affiliation:
Institute of Chemical Technology, Department of Metals and Corrosion Engineering, Technická 5, 166 28 Prague 6, Czech Republic
Get access

Abstract

In this paper, the improvement of casting properties of the high-strength AlZnMgCu alloys is described. This improvement was achieved by additions of Ni, Mg, and Si, which formed eutectic phases, thus reducing the crystallization interval of the alloy. The comparison of the castability and hot-tearing tendency was made for three alloys: nearly single-phase AlZn6Mg2 alloy, quasi-ternary eutectic AlZn7Mg7Cu1Ni3Si3 alloy, and common casting AlSi10 alloy. It was shown that the castability and hot-tearing tendency of the quasi-ternary eutectic alloy are similar to those of the AlSi alloy.

Type
Articles
Information
Journal of Materials Research , Volume 18 , Issue 3 , March 2003 , pp. 635 - 641
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1.Mondolfo, L.F., Structure and Properties of Aluminium Alloys, Metallurgiya Moscow (1979, in Russian).Google Scholar
2.Kolobnev, I.F., Thermal Treatment of Aluminium Alloys, Moskva Moscow (1961, in Russian).Google Scholar
3.Tagiev, E. and Holecek, S., Aluminium 4, 246 (1996).Google Scholar
4.Belov, N.A. and Tagiev, E., Tsvetnaya Metallurgiya 2, 95 (1991, in Russian).Google Scholar
5.Kubácek, L. and Tagijev, E., Kovove Mater. 4, 329 (1993, in Czech).Google Scholar
6.Vojtech, D. and Tagiyev, E., in Proceedings of the 18th National Conference on Heat Treatment with International Participation, Brno, Czech Republic, 2000, edited by Association of Heat Treatment of Metals Prague, (2000), p. 365 (in Czech).Google Scholar
7.Tagiev, E., Holecek, S., and Belov, N., in Proc. Aluminium Alloys, Pt. 1, edited by Murch, G.E., Wohlbier, F.H. (Transtec Publications Ltd. Zuerich, Switzerland, 1996), p. 289.Google Scholar
8.Aluminium and Aluminium Alloys, ASM International (1993).Google Scholar
9.Ber, L.B., Mat. Sci. Eng. A 280, 91 (2000).CrossRefGoogle Scholar
10.Kim, S.W., Kim, D.Y., Kim, W.G., and Woo, K.D., Mat. Sci. Eng. A 304–306, 721 (2001).CrossRefGoogle Scholar