Hostname: page-component-cd9895bd7-gxg78 Total loading time: 0 Render date: 2024-12-19T03:54:41.726Z Has data issue: false hasContentIssue false
  • English
  • Français

Turbulent flow in a rectangular duct

Published online by Cambridge University Press:  11 April 2006

A. Melling  and
J. H. Whitelaw
A. Melling
Affiliation:
Department of Mechanical Engineering, Imperial College, London
J. H. Whitelaw
Affiliation:
Department of Mechanical Engineering, Imperial College, London
Get access Rights & Permissions [Opens in a new window]

Abstract

A detailed experimental study of developing turbulent flow in a rectangular duct was made using a laser-Doppler anemometer. The purposes of the work were to obtain data of value to fluid mechanicists, particularly those interested in the development and testing of mathematical turbulence models, and to evaluate the performance of the anemometer. For the first purpose, contours of axial mean velocity and turbulence intensity were measured in the developing flow, and all three mean velocity components and five of the six Reynolds stresses were obtained in the nearly fully developed flow.

The symmetry of the present flow appears to be better than that of previous measurements and the range of measurements is more extensive. In addition, the laser-Doppler anemometer has the potential advantage, particularly in the measurement of secondary velocities, of avoiding probe interference.

Type
Research Article
Information
Journal of Fluid Mechanics , Volume 78 , Issue 2 , 23 November 1976 , pp. 289 - 315
Copyright
© 1976 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Ahmed, S. & Brundrett, E. 1971 Turbulent flow in non-circular ducts. Mean flow properties in the developing region of a square duct Int. J. Heat Mass Transfer, 14, 365.Google Scholar
Brundrett, E. & Baines, W. D. 1964 The production and diffusion of vorticity in duct flow J. Fluid Mech. 19, 375.Google Scholar
Durão, D. F. G. & Whitelaw, J. H. 1974 Performance characteristics of two frequencytracking demodulators and a counting system. Proc. 2nd Int. Workshop on Laser Velocimetry, Purdue Univ. vol. 1. p. 170.Google Scholar
Durst, F., Melling, A. & Whitelaw, J. H. 1976 Principles and Practice of Laser Doppler Anemometry. Academic.
Durst, F. & Zaré, M. 1974 Removal of pedestals and directional ambiguity of optical anemometer signals Appl. Optics, 13, 2562.Google Scholar
Gessner, F. B. 1964 Turbulence and mean-flow characteristics of fully-developed flow in rectangular channels. Ph.D. thesis, Purdue University.
Gessner, F. B. 1973 The origin of secondary flow in turbulent flow along a corner J. Fluid Mech. 58, 1.Google Scholar
Gessner, F. B. & Jones, J. B. 1965 On some aspects of fully-developed turbulent flow in rectangular channels J. Fluid Mech. 23, 689.Google Scholar
Hartnett, J. P., Koh, J. C. Y. & McComas, S. T. 1962 A comparison of predicted and measured friction factors for turbulent flow through rectangular ducts. Trans. A.S.M.E., J. Heat Transfer, C 84, 82.Google Scholar
Hoagland, L. C. 1960 Fully developed turbulent flow in straight rectangular ducts. Ph.D. thesis, MIT.
Launder, B. E., Reece, G. J. & Rodi, W. 1975 Progress in the development of a Reynolds-stress turbulence closure J. Fluid Mech. 68, 537.Google Scholar
Launder, B. E. & Ying, W. M. 1972 Secondary flows in ducts of square cross-section J. Fluid Mech. 54, 289.Google Scholar
Launder, B. E. & Ying, W. M. 1973 Prediction of flow and heat transfer in ducts of square cross-section Heat & Fluid Flow, 3, 115.Google Scholar
Leutheusser, H. J. 1963 Turbulent flow in rectangular ducts. J. Hyd. Div., Proc. A.S.C.E. 89 (3), 1.Google Scholar
Melling, A. 1975 Investigation of flow in non-circular ducts and other configurations by laser Doppler anemometry. Ph.D. thesis, University of London.
Melling, A. & Whitelaw, J. H. 1973 Measurements in turbulent water and two-phase flows by laser anemometry. Proc. 3rd Bien. Symp. Turbulence in Liquids, Univ. Missouri, Rolla, p. 115.
Naot, D., Shavit, A. & Wolfshtein, M. 1974 Numerical calculation of Reynolds stresses in a square duct with secondary flow Wärme- u. Stoffübertragung, 7, 151.Google Scholar
Nikuradse, J. 1926 Untersuchungen über die Geschwindigkeitsverteilung in turbulenten Strömungen. VDI-Forschungsheft, p. 281.Google Scholar
Perkins, H. J. 1970 The formation of streamwise vorticity in turbulent flow J. Fluid Mech. 44, 721.Google Scholar
Pope, S. B. & Whitelaw, J. H. 1976 The calculation of near-wake flows J. Fluid Mech. 73, 9.Google Scholar
Tatchell, D. G. 1975 Convection processes in confined three-dimensional boundary layers. Ph.D. thesis, University of London.
Thomas, D. L. & Easter, P. G. 1972 Measurements of wall shear stress in a duct of square cross-section. C.E.G.B. Rep. RD/B/N2477.Google Scholar