Published online by Cambridge University Press: 24 April 2006
We present a mathematical model of the unidirectional solidification of a suspension of hard-sphere colloids. Similarity solutions are obtained for the volume fraction and temperature profiles ahead of a planar solidification front. The highly nonlinear functional dependence of the diffusion coefficient on the volume fraction gives rise to a range of behaviours. For small particles, Brownian diffusion dominates and the system behaviour is reminiscent of binary-alloy solidification. Constitutional supercooling occurs at the interface under certain conditions, leading potentially to an instability in the shape of the interface. For larger particles, Brownian diffusion is weak and the particles form a porous layer above the interface. In this case constitutional supercooling reaches a maximum near the surface of the layer, and the porous medium itself is potentially unstable. In stable systems there exists the possibility of secondary nucleation of ice.
Movie 1. The movie shows the freezing of a 5 wt% montmorillonite clay suspension. The base of the cell is cooled to -3 0C. All of the clay particles are excluded from the growing ice and a concentrated particle layer forms above the solidification front. The entire time-lapse movie represents 30 minutes of real time. The gradations at the top of the figure are in millimetres.
Movie 1. The movie shows the freezing of a 5 wt% montmorillonite clay suspension. The base of the cell is cooled to -3 0C. All of the clay particles are excluded from the growing ice and a concentrated particle layer forms above the solidification front. The entire time-lapse movie represents 30 minutes of real time. The gradations at the top of the figure are in millimetres.
Movie 2. This movie again shows the solidification of a 5 wt% montmorillonite suspension. In this case the base of the cell has been cooled to -20 0C, and the rate of freezing is faster. The interface has become unstable, forming ice dendrites. The entire time-lapse movie represents 10 minutes of real time. The gradations at the top of the figure are in millimetres.
Movie 3. Freezing of a 50 wt% montmorillonite suspension. In this case the ice dendrites (darker regions) show strong side-branching and tip-splitting, and a polygonal pattern of ice forms in the clay. As the freezing rate slows down near the end of the movie, the top layer of clay is pushed upward by the growing ice. The blue region at the top is unfrozen water. The entire time-lapse movie represents 3 hours of real time.
Movie 3. Freezing of a 50 wt% montmorillonite suspension. In this case the ice dendrites (darker regions) show strong side-branching and tip-splitting, and a polygonal pattern of ice forms in the clay. As the freezing rate slows down near the end of the movie, the top layer of clay is pushed upward by the growing ice. The blue region at the top is unfrozen water. The entire time-lapse movie represents 3 hours of real time.
To send this article to your Kindle, first ensure no-reply@cambridge.org is added to your Approved Personal Document E-mail List under your Personal Document Settings on the Manage Your Content and Devices page of your Amazon account. Then enter the ‘name’ part of your Kindle email address below. Find out more about sending to your Kindle. Find out more about saving to your Kindle.
Note you can select to save to either the @free.kindle.com or @kindle.com variations. ‘@free.kindle.com’ emails are free but can only be saved to your device when it is connected to wi-fi. ‘@kindle.com’ emails can be delivered even when you are not connected to wi-fi, but note that service fees apply.
Find out more about the Kindle Personal Document Service.
To save this article to your Dropbox account, please select one or more formats and confirm that you agree to abide by our usage policies. If this is the first time you used this feature, you will be asked to authorise Cambridge Core to connect with your Dropbox account. Find out more about saving content to Dropbox.
To save this article to your Google Drive account, please select one or more formats and confirm that you agree to abide by our usage policies. If this is the first time you used this feature, you will be asked to authorise Cambridge Core to connect with your Google Drive account. Find out more about saving content to Google Drive.