Hostname: page-component-cd9895bd7-q99xh Total loading time: 0 Render date: 2024-12-19T11:50:03.316Z Has data issue: false hasContentIssue false
  • English
  • Français

Lateral straining of turbulent boundary layers. Part 1. Streamline divergence

Published online by Cambridge University Press:  26 April 2006

Seyed G. Saddoughi  and
Peter N. Joubert
Seyed G. Saddoughi
Affiliation:
Department of Mechanical Engineering, University of Melbourne, Parkville 3052, Australia Present address: Center for Turbulence Research, Stanford University, CA 94305, USA and NASA-Ames Research Center, MS 202 A-1, Moffett Field CA 94035, USA.
Peter N. Joubert
Affiliation:
Department of Mechanical Engineering, University of Melbourne, Parkville 3052, Australia
Get access Rights & Permissions [Opens in a new window]

Abstract

Extensive experimental studies are presented of the effects of prolonged streamline divergence on developing turbulent boundary layers. The experiment was arranged as source flow over a flat plate with a maximum divergence parameter of about 0.075. Mild, but alternating in sign, upstream-pressure-gradient effects on diverging boundary layers are also discussed.

It appears that two overlapping stages of development are involved. The initial stage covers a distance of about 20 initial boundary-layer thicknesses (δ0) from the start of divergence, where the coupled effects of pressure gradient and divergence are present. In this region there is a fairly large reduction in divergence parameter, Rθ (Reynolds number based on momentum thickness) remains constant (≈ 1400) and the boundary-layer properties change rapidly. In the second region, which lasts nearly to the end of the diverging section, the pressure-gradient effects are negligible, the rate of decrease in divergence parameter is very small and Rθ increases gradually. Up to the last measurement station (≈ 100δ0) the flow is still considered to be at a low Reynolds number (Rθ ≈ 2000). For almost the entire length of this region, the profiles of non-dimensional eddy viscosity appear to be self-similar, but have larger values than for the unperturbed flow. Also in this region, beyond 35δ0, the wake parameter, which has reduced significantly, becomes nearly constant and independent of Rθ. On the other hand the entrainment rate attains a constant value at around 50δ0. It appears that the boundary layer reaches a state of equilibrium. It is suggested that this is the result of an enhanced turbulent diffusion to the outer layer. Spectral measurements show that divergence affects mainly the low-wavenumber, large-scale motions. However, there is no change in large-eddy configurations, since the dimensionless structure parameters show only negligible deviations from the unperturbed values.

Type
Research Article
Information
Journal of Fluid Mechanics , Volume 229 , August 1991 , pp. 173 - 204
Copyright
© 1991 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Benjamin, T. B. 1957 Wave formation in laminar flow down an inclined plane. J. Fluid Mech. 2, 554–574.Google Scholar
Charles, M. E., Govier, G. W. & Hodgson, G. W. 1961 The horizontal pipeline flow of equal density oil-water mixtures. Can. J. Chem. Engng 39, 17–36.Google Scholar
Dijkstra, H. A. 1989 The coupling of Marangoni and capillary instabilities in an annular thread of liquid. J. Colloid Interface Sci. 136, 151–159.Google Scholar
Doedel E, J. 1980 AUTO: A program for the automatic bifurcation analysis of autonomous systems In Proc. 10th Manitoba Conf. on Numerical Maths and Comput., vol. 30. pp. 265–274.
Murphy, S. P., Hendrick, J. J., Martin, M. J., Grant, R. W. & Lind, M. D. 1987 Floating zone processing of indium in earth-orbit. Mat. Res. Soc. Symp. Proc. 87, 139–142.Google Scholar
Preziosi, L. G., Chen, K. & Joseph, D. D. 1989 Lubricated pipelining: stability of core-annular flow. J. Fluid Mech. 201, 323–356.Google Scholar
Russell, T. W. F. & Charles, M. E. 1959. The effect of the less viscous liquid in the laminar flow of two immiscible liquids. Can. J. Chem. Engng 39, 18–24.Google Scholar
Russo, M. J. 1990 Capillary instability and shear stabilization of liquid columns and bridges. Ph.D. thesis, Cornell University.
Russo, M. J. & Steen, P. H. 1989 Shear stabilization of the capillary breakup of a cylindrical interface. Phys. Fluids A1, 1926–1937.Google Scholar
Smith, M. K. 1989 The axisymmetric longwave instability of a concentric two-phase pipe flow. Phys. Fluids A1, 494–506.Google Scholar
Smith, M. K. 1990 The mechanism for the longwave instability in thin liquid films. J. Fluid Mech. 217, 469–485.Google Scholar
Smith, M. K. & Davis, S. H. 1982 The instability of sheared liquid layers. J. Fluid Mech. 121, 187–206.Google Scholar
Smith, M. K. & Davis, S. H. 1983 Instabilities of dynamic thermocapillary layers. Part 2. Surface-wave instabilities. J. Fluid Mech. 132, 145–162.Google Scholar
Xu, J. J. & Davis, S. H. 1985 Instability of capillary jets with thermocapillarity. J. Fluid Mech. 161, 1–25.Google Scholar
Yih, C. S. 1963 Stability of liquid flow down an inclined plane. Phys. Fluids 6, 321–334.Google Scholar
Zubillaga, V., Paterno, J., Guevara, E. & Romero, T. 1985 Pipelining of heavy crude oils using core annular flow In Proc. 3rd Intl Conf. on Heavy Crude and Tar Sands, New York, 22–31 July, 1985. UNITAR/UNDP Information Centre, New York.