Hostname: page-component-586b7cd67f-t8hqh Total loading time: 0 Render date: 2024-11-24T19:25:09.530Z Has data issue: false hasContentIssue false

An experimental and theoretical investigation of particle–wall impacts in a T-junction

Published online by Cambridge University Press:  20 June 2013

D. Vigolo*
Affiliation:
Department of Mechanical and Aerospace Engineering, Princeton University, Princeton, NJ 08544, USA
I. M. Griffiths*
Affiliation:
Mathematical Institute, 24–29 St Giles’, University of Oxford, Oxford OX1 3LB, England, UK
S. Radl
Affiliation:
Institute for Process and Particle Engineering, Graz University of Technology, Inffeldgasse 13/III, 8010 Graz, Austria
H. A. Stone*
Affiliation:
Department of Mechanical and Aerospace Engineering, Princeton University, Princeton, NJ 08544, USA
*
Email addresses for correspondence: [email protected], [email protected], [email protected]
Email addresses for correspondence: [email protected], [email protected], [email protected]
Email addresses for correspondence: [email protected], [email protected], [email protected]

Abstract

Understanding the behaviour of particles entrained in a fluid flow upon changes in flow direction is crucial in problems where particle inertia is important, such as the erosion process in pipe bends. We present results on the impact of particles in a T-shaped channel in the laminar–turbulent transitional regime. The impacting event for a given system is described in terms of the Reynolds number and the particle Stokes number. Experimental results for the impact are compared with the trajectories predicted by theoretical particle-tracing models for a range of configurations to determine the role of the viscous boundary layer in retarding the particles and reducing the rate of collision with the substrate. In particular, a two-dimensional model based on a stagnation-point flow is used together with three-dimensional numerical simulations. We show how the simple two-dimensional model provides a tractable way of understanding the general collision behaviour, while more advanced three-dimensional simulations can be helpful in understanding the details of the flow.

Type
Papers
Copyright
©2013 Cambridge University Press 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Adeosun, J. T. & Lawal, A. 2009 Numerical and experimental studies of mixing characteristics in a T-junction microchannel using residence-time distribution. Chem. Engng Sci. 64, 24222432.Google Scholar
Benchaita, M. T., Griffith, P. & Rabinowicz, E. 1983 Erosion of metallic plate by solid particles entrained in a liquid jet. J. Eng. Ind. (Trans. ASME) 105, 215222.Google Scholar
Blanchard, D. J., Griffith, P. & Rabinowicz, E. 1984 Erosion of a pipe bend by solid particles entrained in water. J. Eng. Ind. (Trans. ASME) 106, 213221.Google Scholar
Bruecker, C. 1997 Study of the three-dimensional flow in a T-junction using a dual-scanning method for three-dimensional scanning-particle-image velocimetry (3-D SPIV). Exp. Therm. Fluid Sci. 14, 3544.Google Scholar
Chen, X., McLaury, B. S. & Shirazi, S. A. 2006 Numerical and experimental investigation of the relative erosion severity between plugged tees and elbows in dilute gas/solid two-phase flow. Wear 261, 715729.CrossRefGoogle Scholar
Chun, B. & Ladd, A.J.C. 2006 Inertial migration of neutrally buoyant particles in a square duct: an investigation of multiple equilibrium positions. Phys. Fluids 18, 031704.Google Scholar
Clark, H. M. I. 1991 On the impact rate and impact energy of particles in a slurry pot erosion tester. Wear 147, 165183.Google Scholar
Clift, R., Grace, J. R. & Weber, M. E. 1978 Bubbles, Drops, and Particles. Academic.Google Scholar
Crockett, H. M. & Horowitz, J. S. 2010 Erosion in nuclear piping systems. J. Pressure Vessel Technol. 132, 024501.Google Scholar
Dreher, S., Kockmann, N. & Woias, P. 2009 Characterization of laminar transient flow regimes and mixing in T-shaped micromixers. Heat Transfer Engng 30 (1–2), 91100.Google Scholar
Goldman, A. J., Cox, R. G. & Brenner, H. 1967 Slow viscous motion of a sphere parallel to a plane wall—I. Motion through a quiescent fluid. Chem. Engng Sci. 22, 637651.CrossRefGoogle Scholar
Guha, A. 2008 Transport and deposition of particles in turbulent and laminar flow. Annu. Rev. Fluid Mech. 40, 311341.Google Scholar
Haller, D., Woias, P. & Kockmann, N. 2009 Simulation and experimental investigation of pressure loss and heat transfer in microchannel networks containing bends and T-junctions. Intl J. Heat Mass Transfer 52 (11), 26782689.Google Scholar
van Haren, S.W. 2011 Testing DNS capability of OpenFOAM and STAR-CCM. Master’s thesis, Delft University of Technology.Google Scholar
Hiemenz, K. 1911 Die grenzschicht an einem in den gleichförmigen flüssigkeitsstrom eingetauchten geraden kreiszylinder (the boundary layer on a circular cylinder in uniform flow). Dingl. Polytec. J. 326, 321328.Google Scholar
Homann, F. 1936 Der einfluss grosser zähigkeit bei der strömung um den zylinder und um die kugel. Z. Angew. Math. Mech. 16, 153164.Google Scholar
Jasak, H. 1996 Error analysis and estimation for the finite volume method with applications to fluid flows. PhD thesis, University of London and Imperial College.Google Scholar
Kockmann, N. & Roberge, D. M. 2011 Transitional flow and related transport phenomena in curved microchannels. Heat Transfer Engng 32, 595608.CrossRefGoogle Scholar
Levy, A. V. 1995 Solid particle erosion and erosion–corrosion of materials. ASM International.Google Scholar
Levy, A. V., Jee, N. & Yau, P. 1987 Erosion of steels in coal-solvent slurries. Wear 117, 115127.CrossRefGoogle Scholar
Li, X., Hunt, M. L. & Colonius, T. 2012 A contact model for normal immersed collisions between a particle and a wall. J. Fluid Mech. 1, 123.Google Scholar
Lynn, R. S., Wong, K. K. & Clark, H. M. I. 1991 On the particle size effect in slurry erosion. Wear 149, 5571.CrossRefGoogle Scholar
Marple, V. A. & Liu, B. 1974 Characteristics of laminar jet impactors. Environ. Sci. Technol. 8 (7), 648654.CrossRefGoogle Scholar
McLaury, B. S., Wang, J., Shirazi, S. A., Shadley, J. R. & Rybicki, E. F. 1997 Solid particle erosion in long radius elbows and straight pipes. In SPE Annual Technical Conference and Exhibition, 5–8 October 1997, San Antonio, Texas. Society of Petroleum Engineers.Google Scholar
Pasol, L., Martin, M., Ekiel-Jezewska, M. L., Wajnryb, E., Blawzdziewicz, J. & Feuillebois, F. 2011 Motion of a sphere parallel to plane walls in a Poiseuille flow. Application to field-flow fractionation and hydrodynamic chromatography. Chem. Engng Sci. 66, 40784089.CrossRefGoogle Scholar
Rader, D. & Marple, V. A. 1985 Effect of ultra-Stokesian drag and particle interception on impaction characteristics. Aerosol Sci. Technol. 4 (1), 141156.CrossRefGoogle Scholar
Richardson, J. F., Coulson, J. M., Harker, J. H. & Backhurst, J. R. 2002 Chemical Engineering: Particle Technology and Separation Processes. Butterworth-Heinemann.Google Scholar
Rubinow, S. I. & Keller, J. B. 1961 The transverse force on a spinning sphere moving in a viscous fluid. J. Fluid Mech. 11, 447459.Google Scholar
Shivamurthy, R. C., Kamaraj, M., Nagarajan, R., Shariff, S. M. & Padmanabham, G. 2010 Slurry erosion characteristics and erosive wear mechanisms of Co-based and Ni-based coatings formed by laser surface alloying. Metall. Mater. Trans. A 41, 470486.Google Scholar
Sommerfeld, M. & Huber, N. 1999 Experimental analysis and modelling of particle–wall collisions. Intl J. Multiphase Flow 25, 14571489.CrossRefGoogle Scholar
Toschi, F. & Bodenschatz, E. 2009 Lagrangian properties of particles in turbulence. Annu. Rev. Fluid Mech. 41, 375404.CrossRefGoogle Scholar
Tu, J. Y. 2000 Numerical investigation of particulate flow behaviour in particle–wall impaction. Aerosol Sci. Technol. 32, 509526.CrossRefGoogle Scholar
Tu, J. Y., Yeoh, G. H., Morsi, Y. S. & Yang, W. 2004 A study of particle rebounding characteristics of a gas–particle flow over a curved wall surface. Aerosol Sci. Technol. 38, 739755.CrossRefGoogle Scholar
Vinchurkar, S., Longest, P. W. & Peart, J. 2009 CFD simulations of the Andersen cascade impactor: model development and effects of aerosol charge. Aerosol Sci. 40 (9), 807822.Google Scholar
Wong, S. H., Ward, M. C. L. & Wharton, C. W. 2004 Micro T-mixer as a rapid mixing micromixer. Sensors Actuators B: Chemical 100, 359379.Google Scholar
Wood, R. J. K. & Jones, T. F. 2003 Investigations of sand–water induced erosive wear of AISI 304L stainless steel pipes by pilot-scale and laboratory-scale testing. Wear 255, 206218.CrossRefGoogle Scholar
Yang, F. L. & Hunt, M. L. 2008 A mixed contact model for an immersed collision between two solid surfaces. Phil. Trans. R. Soc. A 366, 22052218.Google Scholar
Zhang, Y., Reuterfors, E. P., McLaury, B. S., Shirazi, S. A. & Rybicki, E. F 2007 Comparison of computed and measured particle velocities and erosion in water and air flows. Wear 263, 330338.Google Scholar
Zhao, H. X., Yamamoto, M. & Matsumura, M. 1995 Slurry erosion properties of ceramic coatings and functionally gradient materials. Wear 186, 473479.Google Scholar