Hostname: page-component-cd9895bd7-gvvz8 Total loading time: 0 Render date: 2024-12-19T07:05:00.307Z Has data issue: false hasContentIssue false
  • English
  • Français

Wall shear stress and velocity in a turbulent axisymmetric boundary layer

Published online by Cambridge University Press:  26 April 2006

Anthony Wietrzak  and
Richard M. Lueptow
Anthony Wietrzak
Affiliation:
Department of Mechanical Engineering, Northwestern University, Evanston, IL 60208, USA
Richard M. Lueptow
Affiliation:
Department of Mechanical Engineering, Northwestern University, Evanston, IL 60208, USA
Get access Rights & Permissions [Opens in a new window]

Abstract

Instantaneous streamwise fluctuations of the wall shear stress have been measured using a hot-element probe in a thick axisymmetric turbulent boundary layer on a cylinder aligned parallel to the flow. The measurements were made at a momentum-thickness Reynolds number Rθ = 3050 and a ratio of boundary-layer thickness to cylinder radius of δ/a = 5.7. The ratio of the r.m.s. of the fluctuation to the mean value of the wall shear stress, $\tau_{rms}/\bar{\tau}$, is about 0.32, a value slightly lower than that for recent measurements for flow over a flat plate. The probability density function of the wall shear stress is similar to that for planar wall-bounded flows within experimental error. The power spectral density of the wall shear stress shows that a cylindrical boundary layer contains less energy at lower frequencies and more energy at higher frequencies than other wall-bounded flows. Analysis of simultaneous measurement of the streamwise wall shear stress and the streamwise velocity using VITA and peak detection suggests that transverse curvature has little effect on the near-wall burst–sweep cycle compared to planar wall-bounded flows. The angle of inclination of the structures is similar to that measured for large-scale structures in planar wall-bounded flows. However, measurements of the cross-correlation between the shear stress and the velocity suggest the existence of smaller structures yawed to the axis of the cylinder. The coherence between shear stress and velocity shows a low frequency associated with the inclined structures and a higher frequency associated with the yawed structures. The yawed structures could have an arrowhead or half-arrowhead shape and may be associated with fluid from the outer flow washing over the cylinder.

Type
Research Article
Information
Journal of Fluid Mechanics , Volume 259 , 25 January 1994 , pp. 191 - 218
Copyright
© 1994 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Alfredsson, P. H. & Johansson, A. V. 1984 Time scales in turbulent channel flow. Phys. Fluids 31, 1974–1981.Google Scholar
Alfredsson, P. H., Johansson, A. V., Haritonidis, J. H. & Eckelmann, H. 1988 The fluctuating wall-shear stress and the velocity field in the viscous sublayer. Phys. Fluids 31, 1026–1033.Google Scholar
Bellhouse, B. J. & Schultz, D. L. 1968 The measurement of fluctuating skin friction in air with heated thin-film gages. J. Fluid Mech. 32, 675–680.Google Scholar
Bendat, J. S. & Piersol, A. G. 1986 Random Data: Analysis and Measurement Procedures. John Wiley & Sons.
Blackwelder, R. F. 1977 On the role of phase information in conditional sampling. Phys. Fluids 20, S232–242.Google Scholar
Blackwelder, R. F. & Eckelmann, H. 1979 Streamwise vortices associated with the bursting phenomena. J. Fluid Mech. 94, 577–594.Google Scholar
Blackwelder, R. F. & Haritonidis, J. H. 1983 Scaling of the bursting frequency in turbulent boundary layers. J. Fluid Mech. 132, 87–103.Google Scholar
Blackwelder, R. F. & Kaplan, R. E. 1976 On the wall structure of the turbulent boundary layer. J. Fluid Mech. 76, 89–112.Google Scholar
Brown, G. L. & Thomas, A. S. W. 1977 Large structure in a turbulent boundary layer. Phys. Fluids. 20, S243–S252.Google Scholar
Cantwell, B. J. 1981 Organized motion in turbulent flow. Ann. Rev. Fluid Mech. 13, 457–515.Google Scholar
Carslaw, H. S. & Jaeger, J. C. 1957 Conduction of Heat in Solids. Oxford University Press.
Chambers, F. W., Murphy, H. D. & McEligot, D. M. 1983 Laterally converging flow. Part 2. Temporal wall shear stress. J. Fluid Mech. 127, 403–428.Google Scholar
Corino, E. R. & Brodkey, R. S. 1969 A visual investigation of the wall region in turbulent flow. J. Fluid Mech. 37, 1–30.Google Scholar
Dewey, C. F. & Huber, P. W. 1982 Measurement methods for fluid shear stress. Annual Summary Report for January 1 to December 31 1980. Fluid Mech. Laboratory, MIT (March).
Eckelmann, H. 1974 The structure of the viscous sublayer and the adjacent wall region in a turbulent channel flow. J. Flow Mech. 65, 439–459.Google Scholar
Fortuna, G. & Hanratty, T. J. 1971 Frequency response of the boundary layer on wall transfer probes. Intl J. Heat Mass Transfer 14, 1499–1507.Google Scholar
Haritonidis, J. H. 1989 The measurement of wall shear stress. In Advances in Fluid Mechanics Measurements (ed. M. Gad-el-Hak), pp. 229–262. Springer.
Head, M. R. & Ram, V. V. 1971 Simplified presentation of preston tube calibration. Aeronaut. Q. 22, 295–300.Google Scholar
Hogenes, J. H. A. & Hanratty, T. J. 1982 The use of multiple wall probes to identify coherent flow patterns in the viscous wall region. J. Fluid Mech. 124, 363–390.Google Scholar
Johansson, A. R. & Alfredsson, P. H. 1982 On the structure of turbulent channel flow. J. Fluid Mech. 22, 295–314.Google Scholar
Johansson, A. R., Her, J. & Haritonidis, J. H. 1987 On the generation of high-amplitude wall-pressure peaks in turbulent boundary layers and spots. J. Fluid Mech. 175, 119–142.Google Scholar
Keith, W. L. 1990 Spectral measurements of the wall shear stress and wall pressure in a turbulent boundary layer: Theory. US NUSC Tech. Rep. 8295.
Keith, W. L. & Bennett, J. C. 1991 Low frequency spectra of the wall shear stress and wall pressure in a turbulent boundary layer. AIAA J. 29, 523–530.Google Scholar
Kelly, H. R. 1954 A note on the laminar boundary layer on a circular cylinder in axial incompressible flow. J. Aero Sci. 21, 634.Google Scholar
Kim, H. T., Kline, S. J. & Reynolds, W. C. 1971 The production of turbulence near a smooth wall in a turbulent boundary layer. J. Fluid Mech. 50, 133–160.Google Scholar
Kim, J., Moin, P. & Moser, R. 1987 Turbulence statistics in fully developed channel flow at low Reynolds number. J. Fluid Mech. 177, 133–166.Google Scholar
Kline, S. J., Reynolds, W. C., Schraub, F. A. & Runstadler, P. W. 1967 The structure of turbulent boundary layers. J. Fluid Mech. 30, 741–773.Google Scholar
Kline, S. J. & Robinson, S. K. 1990 Quasi-coherent structures in the turbulent boundary layer: Part I. Status report on a community-wide summary of data. In Near Wall Turbulence: 1988 Zoran Zaric Memorial Conf. (ed. S. J. Kline & N. H. Afgan), pp. 200–217. Hemisphere.
Kreplin, H. P. & Eckelmann, H. 1979 Propagation of perturbations in the viscous sublayer and adjacent wall region. J. Fluid Mech. 95, 305–322.Google Scholar
Lefebvre, P. J. & LaPointe, K. M. 1986 The effect of mounting position on hot-film wall shear stress sensors. AIAA-86-1101. AIAA/ASME 4th Fluid Mechanics, Plasma Dynamics and Laser Conf., May 12–14, Atlanta, Georgia.
Ling, S. C. 1963 Heat transfer from a small isothermal spanwise strip on an insulated boundary. Trans. ASME C: J. Heat Transfer 85, 230–236.Google Scholar
Lueptow, R. M. 1988 Turbulent boundary layer on a cylinder in axial flow. US NUSC Tech. Rep. 8389.
Lueptow, R. M. 1990 Turbulent boundary layer on a cylinder in axial flow. AIAA J. 28, 1705–1706.Google Scholar
Lueptow, R. M. & Haritonidis, J. H. 1987 The structure of the turbulent boundary layer on a cylinder in axial flow. Phys. Fluids 30, 2993–3005.Google Scholar
Lueptow, R. M. & Jackson, C. P. 1991 Near-wall streaky structure in a turbulent boundary layer on a cylinder. Phys. Fluids A 3, 2822–2824.Google Scholar
Lueptow, R. M., Leehey, P. & Stellinger, T. 1985 The thick turbulent boundary layer on a cylinder: mean and fluctuating velocities. Phys. Fluids 28, 3495–3505.Google Scholar
Luxton, R. E., Bull, M. K. & Rajagopalan, S. 1984 The thick turbulent boundary layer on a long fine cylinder in axial flow. Aero. J. 88, 186–199.Google Scholar
Madavan, N. K., Deutsch, S. & Merkle, C. L. 1985 Measurements of local skin friction in a microbubble-modified turbulent boundary layer. J. Fluid Mech. 156, 237–256.Google Scholar
Mao, Z. X. & Hanratty, T. J. 1985 The use of scalar transport probes to measure wall shear stress in a flow with imposed oscillations. Exps Fluids 3, 129–135.Google Scholar
Mitchell, J. E. & Hanratty, T. J. 1966 A study of turbulence at a wall using an electrochemical wall shear-stress meter. J. Fluid Mech. 26, 199–221.Google Scholar
Newland, D. E. 1984 Random Vibrations and Spectral Analysis, 2nd edn. Longman.
Nikolaides, C., Lau, K. K. & Hanratty, T. J. 1983 A study of the spanwise structure of coherent eddies in the viscous wall region. J. Fluid Mech. 130, 91–108.Google Scholar
Patel, V. C. 1965 Calibration of the Preston tube and limitations on its use in pressure gradients. J. Fluid Mech. 23, 185–208.Google Scholar
Popovich, A. T. 1969 Statistical analysis of fluid flow fluctuations in the viscous layer near a solid wall. Ind. Engng Chem. Fundam. 8, 609–614.Google Scholar
Rajagopalan, S. & Antonia, R. A. 1979 Some properties of the large structure in a fully developed turbulent duct flow. Phys. Fluids 22, 614–622.Google Scholar
Richmond, R. L. 1957 Experimental investigation of thick axially symmetric boundary layers on cylinders at subsonic and hypersonic speeds. Hypersonic Res. Proj. Memo. 39. California Institute of Technology.
Robinson, S. K. 1990 A review of vortex structures and associated coherent motions in turbulent boundary layers. In Structure of Turbulence and Drag Reduction IUTAM Symp. Zurich, Switzerland 1990 (ed. A. Gyr), pp. 23–50. Springer.
Shah, D. A. & Antonia, R. A. 1987 Scaling of wall shear stress fluctuations in a turbulent duct flow. AIAA J. 25, 22–29.Google Scholar
Shah, D. A. & Antonia, R. A. 1989 Scaling of the bursting period in turbulent boundary layer and duct flows. Phys. Fluids A 1, 318–325.Google Scholar
Snarski, S. R. 1992 Relationship between the fluctuating wall pressure and the turbulent structure of a boundary layer on a cylinder in axial flow. PhD thesis, Northwestern University, Dept. of Mech. Engng.
Spence, D. A. & Brown, G. L. 1968 Heat transfer to a quadratic profile. J. Fluid Mech. 33, 753–773.Google Scholar
Sreenivasan, K. R. & Antonia, R. A. 1977 Properties of wall shear stress fluctuations in a turbulent duct flow. Trans. ASME E: J. Appl. Mech. 44, 389–395.Google Scholar
Thomas, A. S. W. & Bull, M. K. 1983 On the role of wall-pressure fluctuations in deterministic motions in the turbulent boundary layer. J. Fluid Mech. 128, 283–322.Google Scholar
Wietrzak, A. 1992 The fluctuating wall shear stress in the turbulent boundary layer on a cylinder in axial flow. PhD thesis, Northwestern University, Dept. of Mech. Engng.
Willmarth, W. W., Winkel, R. E., Sharma, L. K. & Bogar, T. J. 1976 Axially symmetric turbulent boundary on cylinders: mean velocity profiles and wall pressure fluctuations. J. Fluid Mech. 76, 35–64.Google Scholar
Willmarth, W. W. & Yang, C. S. 1970 Wall-pressure fluctuations beneath turbulent layers on a flat plate and a cylinder. J. Fluid Mech. 41, 47–80.Google Scholar
Zilberman, M., Wygnanski, I. & Kaplan, R. E. 1977 Transitional boundary layer spot in a fully turbulent environment. Phys. Fluids 20, S258–271.Google Scholar