Hostname: page-component-cd9895bd7-p9bg8 Total loading time: 0 Render date: 2024-12-28T14:47:44.475Z Has data issue: false hasContentIssue false

RF Monte Carlo calculation of power amplifier efficiency as function of signal bandwidth

Published online by Cambridge University Press:  10 February 2015

Rik Jos*
Affiliation:
NXP Semiconductors, Gerstweg 2, 6534AE Nijmegen, The Netherlands. Phone: +31 6225 19373 Chalmers University of Technology – MC2, Kemivägen 9, 41296 Gothenburg, Sweden
*
Corresponding author:R. Jos Email: [email protected]

Abstract

We propose a definition of the efficiency bandwidth for a power amplifier (PA) using a modulated signal as the signal bandwidth at which the amplifier efficiency has dropped to a level of 90% of the maximum efficiency at small bandwidth. We introduce a Monte Carlo method to calculate the efficiency bandwidth for some popular PA architectures. The method assumes a given modulated signal at the load. From this load signal the wave forms at the drains of the transistors are derived and the energy dissipation in the transistors can be calculated. Using idealized transistors with no output capacitance the maximum realizable efficiency bandwidth of an asymmetrical Doherty amplifier is 60%, which is much larger than that of an outphasing amplifier, which is 14%. More realistic transistors that include output capacitances, need a matching circuit with a high Q-value which decreases the efficiency bandwidth. Using output capacitance values typical for LDMOS transistors, the asymmetrical Doherty amplifier shows an efficiency bandwidth of about 400 MHz for a signal centered at 1 GHz. For a signal at 2 GHz the efficiency bandwidth is found to be 520 MHz. Due to the fixed values of the output capacitances the efficiency bandwidth does not scale with frequency.

Type
Research Paper
Copyright
Copyright © Cambridge University Press and the European Microwave Association 2015 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1]Qureshi, J.H.; Pelk, M.J.; Marchetti, M.; Neo, W.C.E.; Gajadharsing, J.R.; Van Der Heijden, M.P.; De Vreede, L.C.N.: A 90-W peak power GaN outphasing amplifier with optimum input signal conditioning. IEEE trans. Microw. Theory Techn., 57 (8) (2009), 19251935.Google Scholar
[2]Characterizing Digitally Modulated Signals with CCDF Curves, Agilent Appl. Note, (2000-01-01).Google Scholar
[3]Cripps, S.C.: RF Power Amplifiers for Wireless Communications, Artech House, 2006, ISBN 10: 1-59693-018-7.Google Scholar
[4]The MathCAD files to calculate the efficiency bandwidth for the Class-B, the Doherty and the Outphasing amplifiers and the user instructions can be found on: http://www.nxp.com/design-portal/mathcad-efficiency-bandwidth-calculators.htmlGoogle Scholar
[5]Zhang, X.; Larson, L.E.; Asbeck, P.M.: Design of Linear RF Outphasing Power Amplifiers, Artech House, 2003, ISBN 1-58053-374-4.Google Scholar
[6]Mustafa, A.K.; Ahmed, S.; Faulkner, M.: Bandwidth Limitation for the Constant Envelope Components of an OFDM Signal in a LINC Architecture. IEEE trans. Circuits and Systems., 60 (9) (2013), 25022510.Google Scholar