Hostname: page-component-cd9895bd7-7cvxr Total loading time: 0 Render date: 2024-12-29T12:56:19.985Z Has data issue: false hasContentIssue false

A multi-band switchable antenna for Wi-Fi, 3G Advanced, WiMAX, and WLAN wireless applications

Published online by Cambridge University Press:  11 May 2018

Sadiq Ullah*
Affiliation:
Department of Telecommunication Engineering, University of Engineering and Technology, Peshawar, 23200, Pakistan
Shaheen Ahmad
Affiliation:
Department of Telecommunication Engineering, University of Engineering and Technology, Peshawar, 23200, Pakistan
Burhan A. Khan
Affiliation:
Department of Telecommunication Engineering, University of Engineering and Technology, Peshawar, 23200, Pakistan
James A. Flint
Affiliation:
School of Mechanical, Electrical and Manufacturing Engineering, Loughborough University, Leicestershire, LE11 3TU, UK
*
Author for correspondence: Sadiq Ullah, E-mail: [email protected]

Abstract

This paper presents a hexa-band frequency reconfigurable planar antenna, printed on a 1.6 mm thicker FR 4 substrate and backed by a truncated ground plane. The given antenna operates in four different frequency modes, depending on the state of the two lumped element switches. The proposed antenna works at six frequencies, 2.10, 2.40, 3.35, 3.50, 5.28, and 5.97 GHz. These frequency bands are dedicated to useful wireless applications, including 3G Advanced (2.10 GHz), Wireless Fidelity (Wi-Fi) (2.40 GHz), WiMAX (3.35 GHz), WiMAX (3.5 GHz), WLAN (5.28 GHz) and fixed-satellite and mobile satellite services (5.97 GHz). Satisfactory gain of 1.96, 2.20, 2.671, 2.81, 3.80, and 3.88 dBi, efficiency of 92.5, 94.5, 94.56, 95.0, 93.8, and 97.0% and bandwidth of 332, 485, 1020, 1080, 512, and 465 MHz has been obtained at 2.10, 2.40, 3.35, 3.50, 5.28, and 5.97 GHz, respectively. The modeling and simulations are conducted in CST MWS (2014). The simulated reflection coefficient and radiation pattern are validated in antenna measurement facility. In addition, the specific absorption rate of the antenna on a flat section of human body is also studied. The antenna is compact, low profile, and vastly suitable for multi-band wireless devices.

Type
Research Papers
Copyright
Copyright © Cambridge University Press and the European Microwave Association 2018 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Kunwar, A and Gautam, AK (2017) Fork-shaped planar antenna for Bluetooth, WLAN, and WiMAX applications. International Journal of Microwave and Wireless Technology 9, 859864.Google Scholar
2.Kunwar, A et al. (2017) Inverted L-slot triple-band antenna with defected ground structure for WLAN and WiMAX applications. International Journal of Microwave and Wireless Technology 9, 191196.Google Scholar
3.Cao, YF et al. (2015) A multiband slot antenna for PS/WiMAX/WLAN systems. IEEE Transactions on Antennas and Propagation 63, 952958.Google Scholar
4.Abed, AT and Singh, MSJ (2016) Slot antenna single layer fed by step impedance strip line for Wi-Fi and Wi-Max applications. Electronics Letters 52, 11961198.Google Scholar
5.Hasan, MM et al. (2018) Dual band metamaterial antenna for LTE/bluetooth/WiMAX system. Scientific Reports 8, 117.Google Scholar
6.Thavakumar, S and Susila, M (2018) Design of an internal multi-resonant PIFA antenna for mobile telecommunication networks. Optical and Microwave Technologies 468, 203209.Google Scholar
7.Mansoul, A and Seddiki, ML (2018) Multiband reconfigurable Bowtie slot antenna using switchable slot extensions for WiFi, WiMAX, and WLAN applications. Microwave and Optical Technology Letters 60, 413418.Google Scholar
8.Ali, T et al. (2018) A multiband reconfigurable slot antenna for wireless applications. AEU-International Journal of Electronics and Communications 84, 273280.Google Scholar
9.Shah, SAA et al. (2014) Design of a multi-band frequency reconfigurable planar monopole antenna using truncated ground plane for Wi-Fi, WLAN and WiMAX applications. IEEE International Conference on Open Source Systems & Technologies (ICOSST), pp. 151155.Google Scholar
10.Petosa, A (2012) An overview of tuning techniques for frequency-agile antennas. IEEE Antennas and Propagation Magazine 54, 271296.Google Scholar
11.Majid, HA et al. (2013) Frequency-reconfigurable microstrip patch-slot antenna. IEEE Antennas and Wireless Propagation Letters 12, 218220.Google Scholar
12.Jing, S et al. (2011) Compact E-shaped monopole antenna for dual-band WLAN applications. IEEE International Conference on Microwave Technology & Computational Electromagnetics (ICMTCE), pp. 305308.Google Scholar
13.Iddi, HU et al. (2012) Design of dual-band B-shaped monopole antenna for MIMO application. IEEE Antennas and Propagation Society International Symposium (APSURSI), pp. 12.Google Scholar
14.Haupt, RL and Lanagan, M (2013) Reconfigurable antennas. IEEE Antennas and Propagation Magazine 55, 4961.Google Scholar
15.Yadav, AM et al. (2011) Analysis of techniques to minimize the interference effects of metallic control lines on reconfigurable microstrip antennas. Loughborough Antennas and Propagation Conference (LAPC), pp. 16.Google Scholar
16.Balanis, CA (2016) Antenna Theory: Analysis and Design. John Wiley and Sons, Hoboken, New Jersey.Google Scholar
17.Ali, U et al. (2017) Design and SAR analysis of wearable antenna on various parts of human body, using conventional and artificial ground planes. Journal of Electrical Engineering Technology 12, 317328.Google Scholar