Hostname: page-component-cd9895bd7-hc48f Total loading time: 0 Render date: 2024-12-18T18:52:52.339Z Has data issue: false hasContentIssue false
  • English
  • Français

Compact dual-band axially corrugated profiled horn for prime-focus reflector antenna

Published online by Cambridge University Press:  12 May 2011

Ramesh Chandra Gupta ,
Jigar Pandya ,
Khagindra K. Sood  and
Rajeev Jyoti
Ramesh Chandra Gupta*
Affiliation:
Satellite Communication Antenna Division, Antenna Systems Group, Space Applications Centre, Indian Space Research Organisation, Jodhpur Tekra, Ahmedabad, Gujarat 380015, India
Jigar Pandya
Affiliation:
Satellite Communication Antenna Division, Antenna Systems Group, Space Applications Centre, Indian Space Research Organisation, Jodhpur Tekra, Ahmedabad, Gujarat 380015, India
Khagindra K. Sood
Affiliation:
Satellite Communication Antenna Division, Antenna Systems Group, Space Applications Centre, Indian Space Research Organisation, Jodhpur Tekra, Ahmedabad, Gujarat 380015, India
Rajeev Jyoti
Affiliation:
Antenna Systems Group, Space Applications Centre, Indian Space Research Organisation, Jodhpur Tekra, Ahmedabad, Gujarat 380015, India
*
Corresponding author: R. C. Gupta Email: [email protected]
Get access Rights & Permissions [Opens in a new window]

Abstract

This paper reports a new compact dual-band axially corrugated profiled horn feed (DBCPH) for prime-focus reflector antenna at C-band (uplink and downlink frequency bands with bandwidth ratio of 1.6). DBPCH consists of one sinusoid profiled section and two internal axial corrugations (internal short-circuited ring slots), for obtaining a multimode horn feed. Such a blended structure is optimized over the specified frequency bands (3.68–3.70 and 5.865–5.915 GHz) to achieve various performance objectives (such as compactness, return loss, polarization purity, etc.). Measured and predicted results show that DBCPH provides better return loss >18.6 dB, low cross-polarization (better than −32 dB), and adequate edge taper at ±48° (8.5–11.7 dB) along with compact size (1.3λ aperture diameter and 0.88λ length at lower frequency). The horn would be used as a feed element for front-fed prime-focus reflector for pencil beam spacecraft antenna application.

Keywords

Dual-band antennaAxially corrugated profiled hornPrime-focus reflector antennaSpacecraft antenna
Type
Industrial and Engineering Papers
Information
International Journal of Microwave and Wireless Technologies , Volume 3 , Issue 4 , August 2011 , pp. 493 - 496
Copyright
Copyright © Cambridge University Press and the European Microwave Association 2011

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1]Cowan, J.H.: Dual-band reflector-feed element for frequency-reuse applications. Electron. Lett., 9 (25) (1973), 596–597.CrossRefGoogle Scholar
[2]Rao, S.K.: A simple dual-band corrugated horn with low cross-polarization. IEEE Trans. Antennas Propag., 38 (6) (1990), 946–950.CrossRefGoogle Scholar
[3]Grunert, R.W.; Hazelwood, J.D.: Dual-band wide-illumination-angle feed horns with low off-axis cross polarization. IEEE Int. Symp. Antenna Propag. Soc., 2 (1990), 956–959.Google Scholar
[4]Deguchi, H.; Goto, T.; Tsuji, M.; Shigesawit, H.: Dual-band serpentine-shaped horn with low cross polarization. IEEE Int. Symp. Antenna Propag. Soc., 1 (2002), 658–661.CrossRefGoogle Scholar
[5]Sotoudeh, O.; Kildal, P.-S.; Ingvarson, P.; Skobelev, S.P.: Single and dual-band multimode hard horn antennas with partly corrugated walls. IEEE Trans. Antennas Propag., 54 (2) (2006), 330–339.CrossRefGoogle Scholar
[6]Chan, K. K.; Rao, S.: Design of high efficiency circular horn feeds for multibeam reflector applications. IEEE Trans. Antennas Propag., 56 (1) (2008), 253–258.CrossRefGoogle Scholar
[7]Granet, C.; James, G.L.: Spline-profile smooth-walled C-band horn. IEEE Antennas Wirel. Propag. Lett., 6 (2007), 415–418.CrossRefGoogle Scholar
[8]Granet, C.: Profile options for feed horn design, in Proc. of Asia-Pacific Microwave Conf., 1 (2000), 1448–1452.Google Scholar