Hostname: page-component-586b7cd67f-2brh9 Total loading time: 0 Render date: 2024-11-24T21:34:43.322Z Has data issue: false hasContentIssue false

A compact broadband printed monopole antenna with U-shaped slit and rectangular parasitic patches for multiple applications

Published online by Cambridge University Press:  22 April 2015

Sudeep Baudha*
Affiliation:
Department of Electronics and Communication Engineering, Indian Institute of Information Technology Design and Manufacturing, Jabalpur, India
Dinesh Kumar Vishwakarma
Affiliation:
Department of Electronics and Communication Engineering, Indian Institute of Information Technology Design and Manufacturing, Jabalpur, India
*
Corresponding author: S. Baudha Email: [email protected]

Abstract

This paper presents a compact broadband printed monopole antenna with U-shaped slit in the partial ground plane and rectangular parasitic patches adjacent to the microstrip line for multiple applications. The optimal dimensions of the proposed antenna are 35 × 25 × 1.5 mm3 and is fabricated on commercially available low-cost FR4 substrate with εr = 4.3 and 0.025 loss tangent. Due to introduction of rectangular parasitic patches and U-shaped slit large bandwidth has been achieved. The impedance bandwidth (return loss, magnitude of S11 < 10 dB) of the proposed antenna is 139% (2.9–16.3 GHz). The proposed antenna covers ultra wide band applications, 5.2/5.8 GHz WLAN bands, 3.5/5.5 GHz WiMAX bands, X band (8–12 GHz), satellite communication, and other wireless communication services. The study shows that there is good agreement in simulated and measured results. Nearly stable radiation patterns have been obtained throughout the operating band. Antenna results and details are discussed and elaborated.

Type
Research Papers
Copyright
Copyright © Cambridge University Press and the European Microwave Association 2015 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Wong, K.L.: Compact and Broadband Microstrip Antennas, Wiley, New York, 2002.Google Scholar
[2] Baudha, S.; Vishwakarma, D.K.: Miniaturized dual broadband printed slot antenna with parasitic slot and patch. Microw. Opt. Technol. Lett., 56 (10) (2014), 22602265.Google Scholar
[3] Baudha, S.; Vishwakarma, D.K.: Bandwidth enhancement of a planar monopole microstrip patch antenna. Int. J. Microw. Wireless Technol., (12) (2014), 16.Google Scholar
[4] Sze, J.Y.; Wong, K.: Bandwidth enhancement of a microstrip line-fed printed wide-slot antenna. IEEE Trans. Antennas Propag., 49 (7) (2001), 10201024.Google Scholar
[5] Jan, J.Y.; Su, J.W.: Bandwidth enhancement of a printed wide-slot antenna with a rotated slot. IEEE Trans. Antennas Propag., 53 (6) (2005), 21112114.Google Scholar
[6] Jan, J.Y.; Wang, L.C.: Printed wideband rhombus slot antenna with a pair of parasitic strips for multiband applications. IEEE Trans. Antennas Propag., 57 (4) (2009), 12671270.Google Scholar
[7] Sung, Y.: Bandwidth enhancement of a microstrip line-fed printed wide-slot antenna with a parasitic centre patch. IEEE Trans. Antennas Propag., 60 (4) (2012), 17121716.Google Scholar
[8] Ojaroudi, N.; Ojaroudi, M.: Novel design of dual band-notched monopole antenna with bandwidth enhancement for UWB applications. IEEE Antennas Wireless Propag. Lett., 12 (2013), 698701.Google Scholar
[9] Kazim, J.; Bibi, A.; Rauf, M.; Tariq, M.; Owais, : a compact planar dual band-notched monopole antenna for UWB application. Microw. Opt. Technol. Lett., 56 (5) (2014), 10951097.Google Scholar
[10] Telsang, T.M.; Kakade, A.B.: Ultra wideband slotted semicircular patch antenna. Microw. Opt. Technol. Lett., 56 (2) (2014), 362369.Google Scholar