Hostname: page-component-586b7cd67f-rdxmf Total loading time: 0 Render date: 2024-11-30T23:51:50.995Z Has data issue: false hasContentIssue false
  • English
  • Français

Calculation of measurement uncertainty for cellulose based transformed board material in tensile testing

Published online by Cambridge University Press:  26 September 2012

S. Fank  and
B. Aydemir
Get access

Abstract

Today’s global economy obliges manufacturers to produce their products in high quality with cheaper cost. Thus, manufacturers must develop their products applying tests to get better performance and higher quality before distributing them to the competitive market. In order to produce long working life of transformer reactors without losing their performance, different tests including axial and flexural testing are applied on the cellulose based laminated board material used in production. During development of laminated board material, test results should be known very well and the measurement uncertainty of tensile tests should be calculated taking into account all parameters. In this study, effective parameters on the quality of tensile testing causing an increase on the measurement uncertainty are investigated. Tensile strength and elongation test of laminated board material were carried out according to IEC 60641-2 and the uncertainty contributions based on experimental results were calculated. The results and impact of the uncertainty parameters are presented in detail.

Keywords

Tensile testingmeasurement uncertaintylaminated pressboard
Type
Research Article
Information
International Journal of Metrology and Quality Engineering , Volume 3 , Issue 1 , 2012 , pp. 15 - 18
Copyright
© EDP Sciences 2012

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Evolving Needs for Metrology in Material Property Measurements, Report of the CIPM ad hoc Working Group on Materials Metrology (WGMM) (2007)
T.M. Adams, A2LA Guide for Estimation of Measurement Uncertainty in Testing, Guidance, G104 (2002)
IEC 60763-2, Specification for laminated pressboard – Part 2 : Methods of test, edition 2.0 (2007)
IEC 60641-2, Pressboard and presspaper for electrical purposes – Part 2 : Methods of tests, 2nd edn. (2004)
EN ISO 7500-1, Metallic materials – Verification of static uniaxial testing machines, Part 1 : Tension/compression testing machines-Verification and calibration of the force-measuring system (2004)
Lekou, D.J., Assimakopoulou, T.T., Philippidis, T.P., Estimation of the Uncertainty in Measurement of Composite Material Mechanical Properties During Static Testing, Strain 47, 430–438 (2011) CrossRefGoogle Scholar
Room Temperature Tensile Testing : A method for Estimating Uncertainty of measurements, http://midas.npl.co.uk
B. Aydemir, S. Fank, Training notes for uncertainty calculation of mechanical tests (tensile and bending), G2KV-100, G2KV-100 (TÜBITAK UME, Turkey, 2011)