A newly investigated travertine deposit in southern Tibet provides a window into Holocene hydrological, geomorphic and climatic processes near the boundary of the Tibetan Plateau and High Himalaya. Travertine, deposited as a result of the degassing of CO2-rich groundwater as it emerges on the Earth's surface, is in many cases formed along the trace of major crustal-scale faults in primarily extensional tectonic regimes. A travertine platform measuring roughly 1 km by 0.5 km exists near the town of Nyalam in southern Tibet along a major Himalayan down-to-the-N normal fault, the South Tibetan Fault System. A wide variety of travertine depositional textures and features are recorded in the platform on a series of terraces. Active travertine deposition was observed from spring mounds and seeps along the base of the platform at the modern river level. Palaeotemperatures of spring water, calculated from δ18O of the travertine, range from 9 to 25 °C, which closely matches the temperatures recorded from modern springs in the area. A complex geomorphological landscape records interaction between growing alluvial fans, travertine accumulation, and a rapidly down-cutting river with associated fluvial terraces. River incision was contemporaneous with travertine deposition, as indicated by cemented fluvial river gravel layers interbedded with travertine. High 87Sr/86Sr ratios in the travertine (mean of 0.7168) indicate subsurface fluid interaction with radiogenic crystalline rocks of the underlying Greater Himalaya. Uranium-series ages of the travertine platform range from 5400 a (±950 a) to 11600 a (±1000 a), and indicate a younging progression from higher terraces near the valley wall to lower terraces at present-day river level. Travertine that overlies a river gravel terrace 18 m above river level formed at 11600 a. This date yields a local incision rate of 1.6 mm a−1, consistent with estimated fluvial incision rates in the High Himalaya. The range of our U-series ages coincides with an interval of higher precipitation associated with greater intensity of the Indian monsoon, which led to elevated spring discharge and carbonate precipitation in this part of the High Himalayas.

In the sheared and foliated granitoids of the Proterozoic Gavilgarh–Tan Shear Zone (GTSZ) in central India, two types of pseudotachylite (Pt-M and Pt-C) are recognized. Pt-M layers are interbanded with mylonite and ultramylonite, show strong internal plastic deformation and buckle folding concurrent with the host rocks, and appear to have formed within the greenschist facies (300–400 °C) in the brittle–plastic transitional (semi-brittle) regime. Pt-C layers show sharp contacts with the host rock, exhibit abundant coeval cataclasis, preserve no evidence of subsequent plastic deformation, and formed at shallower depths, at temperature < 300 °C. Sulphide droplets and embayment of quartz grain margins in the pseudotachylite (Pt-C) matrix indicates a melt origin. Ductile shear sense criteria in the host mylonites are consistently sinistral, while those associated with the deformed pseudotachylite (Pt-M) layers are dextral. It appears therefore that the host mylonite/ultramylonite foliation experienced reactivated slip movement in the ‘semi-brittle’ zone when pseudotachylite was generated and subsequently ductilely deformed. The brittle pseudotachylite (Pt-C) layers were generated later at a shallower level, and at a lower temperature. They are spatially associated with a set of foliation-parallel brittle shears with sinistral-sense displacements. The multiple episodes of frictional melt generation within the Gavilgarh–Tan Shear Zone illustrate that it has a complex history of multiple reactivations. It therefore represents an important new area for the study of seismic behaviour of the upper crust along pre-existing structures and may facilitate a better geological understanding of the present seismic activity in the central Indian Shield.

There is little consensus on the systematic position of the colossal theropod dinosaur Chilantaisaurus tashuikouensis from the Cretaceous (Aptian–?Albian or Upper Cretaceous) Ulansuhai Formation of Inner Mongolia, which has been recovered as a derived member of both Allosauroidea and Spinosauroidea by numerical phylogenetic analyses. Redescription of the type material of C. tashuikouensis reveals an unusual combination of morphological features that render determination of its systematic position problematic. It possesses anatomical features that have been proposed as synapomorphies of Neotetanurae: a preacetabular fossa on the ilium, and a wedge-shaped cross-section of the shaft of the third metatarsal. It also shares some features with specific allosauroid taxa: a pronounced ulnar epicondyle on the humerus, and a prominent medial shelf bounding the preacetabular fossa on the ilium (also present in tyrannosauroids). However, it lacks some features that are present in all other allosauroids: a marked depression on the anterior surface of the distal humerus adjacent to the ulnar condyle, and a humerus that is less than 0.4 times the length of the femur; it furthermore possesses a tibial astragalar facet that is approximately 10% of the tibial length, which suggests a more basal position within Tetanurae. Chilantaisaurus shares certain features with some spinosauroids: an enlarged and elongated first manual ungual, and a suprastragalar buttress that has been modified to a vertical ridge, but these characters are not unique to spinosauroids. A highly reduced fourth trochanter may be an autapomorphy of Chilantaisaurus, as has previously been suggested, or unite the taxon with Coelurosauria in an entirely novel grouping. On the basis of these observations it is likely that Chilantaisaurus is a neotetanuran, but unlikely that it is an allosauroid. Chilantaisaurus may belong to an alternative lineage of very large theropods that continued into the Cretaceous from the diversification of basal neotetanurans during the Middle Jurassic.

Twelve 40Ar–39Ar biotite and four hornblende age determinations have been carried out to constrain the cooling history of the Proterozoic bedrock near Oskarshamn, SE Sweden, an area identified as a possible site for long-term nuclear waste storage. The bedrock hosts c. 1.80 Ga granites and diorites of the Transscandinavian Igneous Belt and two 1.45–1.44 Ga granite intrusions, the Götemar and Uthammar plutons. Biotite was selected from three surface samples, representing both the older rocks and the younger granites, and from three cored boreholes at nine different depth levels. Hornblende was extracted from samples at the top and bottom of one borehole and at two sub-surface levels of another borehole. Three age groups were distinguished: ≥1.62 Ga, 1.51–1.47 Ga and 1.43–1.42 Ga. In the first group, two hornblende analyses yielded ages of 1799±4 Ma and 1773±13 Ma, which indicate initial fast cooling after emplacement of 1.80 Ga rocks of the Transscandinavian Igneous Belt. Two biotite ages of 1618±7 Ma and 1621±3 Ma are interpreted to date final cooling, through 300 °C, after the youngest suite (1.68–1.67 Ga) of the Transscandinavian Igneous Belt in south-central Sweden. Seven biotite ages, in the range 1.51–1.47 Ga, are enigmatic to interpret but largely coincide in age with the end of widespread rapakivi magmatism in Fennoscandia and the initiation of the Danopolonian event. The 1.43–1.42 Ga biotite and hornblende ages reflect cooling after thermal heating from the 1.45–1.44 Ga Götemar and Uthammar plutons. Later events thermally affected the bedrock in the Oskarshamn area as indicated by a poorly defined biotite age of 928±6 Ma and other disturbed 40Ar–39Ar ages of samples bordering a complex deformation zone.

Structural data and a regional tectonic interpretation are given for the NE–SW-trending Hatay Graben, southern Turkey, within the collision zone of the African (Arabian) and Eurasian (Anatolian) plates. Regional GPS and seismicity data are used to shed light on the recent tectonic development of the Hatay Graben. Faults within Upper Cretaceous to Quaternary sediments are categorized as of first-, second- and third-order type, depending on their scale, location and character. Normal, oblique and strike-slip faults predominate throughout the area.The flanks of the graben are dominated by normal faults, mainly striking parallel to the graben, that is, 045–225°. In contrast, the graben axis exhibits strike-slip faults, trending 100–200°, together with normal faults striking 040–060° and 150–190° (a subset strikes 110–130°). Similarly orientated normal faults occur throughout Upper Cretaceous to Pliocene sediments, whereas strike-slip faults are mostly within Pliocene sediments near the graben axis. Stress inversion of slickenline data from mostly Pliocene sediments at ten suitable locations (all near the graben axis) show that σ3 directions (minimum stress axis ≈ extension direction) are uniform in the northeast of the graben but orientated at a high angle to the graben margins. More variable σ3 directions in the southwest may reflect local block rotations. During Miocene times, the Arabian and Anatolian plates collided, forming a foreland basin associated with flexurally controlled normal faulting. During the Late Miocene there was a transition from extension to transtension (oblique extension). The neotectonic Hatay Graben formed during the Plio-Quaternary in a transtensional setting. In the light of modern and ancient comparisons, it is suggested that contemporaneous strain was compartmentalized into large-scale normal faults on the graben margins and mainly small-scale strike-slip faults near the graben axis. Overall, the graben reflects Plio-Quaternary westward tectonic escape from a collision zone towards the east to a pre- or syn-collisional zone to the west in the Mediterranean Sea.

Southwest Spitsbergen, Wedel Jarlsberg Land, consists of two Proterozoic crustal blocks with differing metamorphic histories. Both blocks experienced Caledonian greenschist-facies metamorphism, but only the southern block records an earlier pervasive M1 amphibolite-facies metamorphism and strong deformational fabric. In situ EMPA total-Pb monazite geochronology from both matrix and porphyroblast inclusion results indicate that the older M1 metamorphism occurred at 643 ± 9 Ma, consistent with published cooling ages of c. 620 Ma (hornblende) and 580 Ma (mica) obtained from these same rocks. This region thus contains a lithostratigraphic profile and metamorphic history which are unique within the Svalbard Archipelago. Documentation of a pervasive late Neoproterozoic Barrovian metamorphism is difficult to reconcile with a quiescent non-tectonic regime typically inferred for this region, based on the occurrence of rift-drift sequences on the Baltic and Laurentian passive margins. Instead, our new metamorphic age implies an exotic origin of the pre-Devonian basement exposed in SW Spitsbergen and supports models of terrane assembly postulated for the Svalbard Archipelago.

Gypsum veins and faults were studied in red mudstones of the Upper Triassic Mercia Mudstone Group, in the Bristol Channel Basin, exposed in E–W-trending cliffs at Watchet on the Somerset Coast (SW England). In nodular gypsum horizons, individual gypsum nodules are connected by subhorizontal gypsum veins. In evaporite-free mudstone layers, however, dense anastomosing networks of gypsum veins occur. In a 300 m long profile dissected by 28 (mostly) normal faults with small displacements, 24 faults have veins following them, indicating palaeofluid transport along the fault planes. Ninety-seven cross-cutting relationships and mostly perpendicular vein fibres indicate that the veins are primarily extension fractures. The thickest veins in the vein network are subhorizontal (160 measurements), indicating a vertical orientation of the minimum principal compressive stress (horizontal basin compression). Such a stress state may have existed during basin inversion associated with Alpine compression (late Cretaceous to early Tertiary). I propose that the gypsum veins are the result of hydrofracturing. In the gypsum nodules, then presumably consisting of anhydrite, overpressure was generated related to the hydration of anhydrite to gypsum. Stress concentration around the nodules led to rupturing and injection of thin subhorizontal hydrofractures. Some of the calcium-sulphate saturated fluids were then transported upwards along the faults and gained access to evaporite-free mudstone layers where dense anastomosing vein networks developed. Most veins were arrested during their propagation by layers with contrasting mechanical properties (stress barriers). Some veins, however, propagated through the barriers along faults to shallower levels. The dense networks of mineral veins observed in Watchet indicate that hydrofractures can generate a very high temporary permeability in fluid reservoirs.

The Rutog granitic pluton lies in the Gangdese magmatic arc in the westernmost part of the Lhasa Terrane, NW Tibet, and has SHRIMP zircon U–Pb ages of c. 80 Ma. The pluton consists of granodiorite and monzogranite with SiO2 ranging from 62 to 72 wt% and Al2 O3 from 15 to 17 wt%. The rocks contain 2.33–4.93 wt% K2O and 3.42–5.52 wt% Na2O and have Na2O/K2O ratios of 0.74–2.00. Their chondrite-normalized rare earth element (REE) patterns are enriched in LREE ((La/Yb)n = 15 to 26) and do not show significant Eu anomalies (δEu = 0.68–1.15). On a primitive mantle-normalized trace element diagram, the rocks are rich in large ion lithophile elements (LILE) and poor in high field strength elements (HFSE), HREE and Y. Their Sr/Y ratios range from 15 to 78 with an average of 30. The rocks have constant initial 87Sr/86Sr ratios (0.7045 to 0.7049) and slightly positive ɛNd(t) values (+0.1 to +2.3), similar to I-type granites generated in an arc setting. The geochemistry of the Rutog pluton is best explained by partial melting of a thickened continental crust, triggered by underplating of basaltic magmas in a mantle wedge. The formation of the Rutog pluton suggests flat subduction of the Neo-Tethyan oceanic lithosphere from the south. Crustal thickening may have occurred in the Late Cretaceous prior to the India–Asia collision.

The discovery of volcanogenic ‘brown beds’ in Dalradian and Torridonian (Sleat Group and Diabaig Group) sequences in Scotland has raised questions about their origin and provenance. New discoveries of a grey facies cognate to the ‘brown beds’ have led to an hypothesis which proposes that these beds originated as tephra-fall deposits of intermediate to mafic composition. Subsequent prehnite–pumpellyite- and greenschist-facies metamorphism generated an albite–chlorite–muscovite–quartz–calcite assemblage. Recent sub-aerial weathering selectively dissolved interstitial calcite and oxidized iron, which left an albite-rich ‘brown bed’ with a porous saccharoidal texture. Field relationships and mineralogy support their origin as tephra-fall deposits and their widespread occurrence suggests they are not localized phenomena. Crucially, the weathered ‘brown beds’ point to the existence of otherwise cryptic grey metamorphosed tuffs which tend to blend in with their host metasediments.

The Tarim Basin in Northwest China hosts petroleum reservoirs of Cambrian, Ordovician, Carboniferous, Triassic, Jurassic, Cretaceous and Tertiary ages. The sedimentary thickness in the basin reaches about 15 km and with an area of 560000 km2, the basin is expected to contain giant oil and gas fields. It is therefore important to determine the ages and depositional environments of the petroleum source rocks. For prospective evaluation and exploration of petroleum, palynological investigations were carried out on 38 crude oil samples collected from 22 petroleum reservoirs in the Tarim Basin and on additionally 56 potential source rock samples from the same basin. In total, 173 species of spores and pollen referred to 80 genera, and 27 species of algae and fungi referred to 16 genera were identified from the non-marine Mesozoic sources. By correlating the palynormorph assemblages in the crude oil samples with those in the potential source rocks, the Triassic and Jurassic petroleum source rocks were identified. Furthermore, the palynofloras in the petroleum provide evidence for interpretation of the depositional environments of the petroleum source rocks. The affinity of the miospores indicates that the petroleum source rocks were formed in swamps in brackish to lacustrine depositional environments under warm and humid climatic conditions. The palynomorphs in the crude oils provide further information about passage and route of petroleum migration, which is significant for interpreting petroleum migration mechanisms. Additionally, the thermal alternation index (TAI) based on miospores indicates that the Triassic and Jurassic deposits in the Tarim Basin are mature petroleum source rocks.

U–Pb LA–SF–ICP–MS analyses of detrital zircons from a metalitharenite on Inousses Island, Greece, gave major age groups of 310–350, 450–500, 550–700, 900–1050 and 1880–2040 Ma and minor peaks between 2600 and 2800 Ma. The youngest concordant zircon grains of 310–330 Ma indicate the maximum age of deposition to be Late Carboniferous, rather than Ordovician, as had been earlier assumed. The lack of zircon ages between 1.1 and 1.8 Ga, coupled with the occurrence of c. 2-Ga-old zircons, imply a northern Gondwana-derived source. Detrital zircons from a garnet–mica schist on Psara Island yielded a major age group of c. 295–325 Ma and only minor Early Palaeozoic and Late Neoproterozoic ages. The youngest grains around 270 Ma indicate the maximum age of deposition to be Late Permian. The Early Palaeozoic ages support a source from terranes at the southern margin of Laurussia during the Late Palaeozoic and hence clarify the palaeotectonic position of units from the eastern Aegean Sea within the Palaeotethyan realm.