Published online by Cambridge University Press: 01 November 2006
Slippery surfaces are a continuous concern in equine veterinary practice during both treatment and orthopaedic work-ups, especially when horses have to trot on circles. Sliding of the equine foot on the ground with the potential of injury is prevented if the horizontally acting accelerating or decelerating forces on the foot do not exceed maximal friction. Friction can be calculated and therefore anticipated if the coefficient of friction (μ) between the foot of the horse and the particular ground surface is known. Friction between shod and unshod cadaver equine hooves and different ground surfaces (concrete, tarmac and rubber) was determined by pulling the hooves horizontally in a uniform motion. Horizontal forces (Fh) were measured on a force plate and with a portable digital electronic force meter. The coefficient of friction (μ) was calculated as the quotient between Fh and the gravity force (N) of the object, hence: μ = Fh /N. This study has shown that the coefficient of friction between equine hooves and a specific ground surface can be determined using a portable digital force meter or a force plate. Friction significantly depended not only on the type of surface but also on shoeing of the equine foot. Bare feet showed more friction with the hard surfaces (bricks and tarmac), the shod feet showing more friction with the rubber surfaces. Coefficients of friction could be used to estimate the possibility of injuries occurring in the equine industry during exercise and/or lameness or pre-purchase examinations.