A Deep Hot Zone develops when numerous mafic sills are repeatedly injected at Moho depth or are scattered in the lower crust. The melt generation is numerically modelled for mafic sill emplacement geometries by overaccretion, underaccretion or random emplacement, and for intrusion rates of 2, 5 and 10 mm/yr. After an incubation period, melts are generated by incomplete crystallisation of the mafic magma and by partial melting of the crust. The first melts generated are residual from the mafic magmas that have low solidi due to concentration of H2O in the residual liquids. Once the solidus of the crust is reached, the ratio of crustal partial melt to residual melt increases to a maximum. If wet mafic magma, typical of arc environments, is injected in an amphibolitic crust, the residual melt is dominant over the partial melt, which implies that the generation of I-type granites is dominated by the crystallisation of mafic magma originated from the mantle and not by the partial melting of earlier underplated material. High ratios of crustal partial melt over residual melt are reached when sills are scattered in a metasedimentary crust, allowing the generation of S-type granites. The partial melting of a refractory granulitic crust intruded by dry, high-T mafic magma is limited and subordinate to the production of larger amount of residual melt in the mafic sills. Thus the generation of A-type granites by partial melting of a refractory crust would require a mechanism of selective extraction of the A-type melt.

The main phase (∼400 Ma) emplacement of the central and northern part of the reversely zoned Galway Granite was incremental by progressive northward marginal dyke injection and stoping of the 470–467 Ma Connemara metagabbro-gneiss country rock. The space was provided by the synchronous ESE-opening, along the strike of the country rocks, of extensional fractures generated successively northward by a releasing bend in the sinistrally moving Skird Rocks Fault or an equivalent Galway Bay Fault. This fault is a prolongation of the Antrim–Galway (a splay off the Highland Boundary Fault) and Southern Upland Faults. The ESE-strike of the spalled-off rocks controlled the resultant ESE-elongated shape of the batholith. The magma pulses (∼5–30 m in thickness) were progressively more fractionated towards the northern margin so that the coarse Porphyritic (or Megacrystic) Granite (GP; technically granodiorite) in the centre was followed outwards by finer grained, drier and more siliceous granite, until the movements opening the fractures ceased and the magma became too viscous to intrude. ‘Out-of-sequence’ pulses of more basic diorite-granodiorite (including the Mingling–Mixing Zone) and late main phase, more acid, coarse but Aphyric Granite, into the centre of the batholith, complicated the outward fractionation scheme. The outward expansion, caused by the intrusions into the centre, caused a foliation and flattening of cognate xenoliths within the partly crystallised northern marginal granite and in the Mingling–Mixing Zone to the south.

Late phase (∼380 Ma) central intrusions of the newly-discovered aphyric Shannapheasteen Finegrained Granite (technically granodiorite), the Knock, the Lurgan and the Costello Murvey Granites, all more siliceous and less dense than the GP, were emplaced by pushing up the already solid and jointed GP along marginal faults. This concentration of lighter granites plus compression shown in thrusting, caused overall fault uplift of the Central Block of the Galway batholith so that the originally deepest part of the GP is exposed where there is the most late phase granite. Chemical analyses show the main and late phase magmas, including late dykes, were very similar, with repetition of the same fractionation except that the late phase magmas were drier and more quickly cooled, giving finer grained rocks.

Elements of the Ordovician conodont genus Protopanderodus have been investigated in order to provide a model of reconstruction for its oral apparatus. In total, 4,202 elements from the five named species representing this genus in the Swedish Middle Ordovician are included in this study: P. rectus, P. parvibasis, P. graeai, P. robustus and P. calceatus. The well-preserved specimens were studied in detail for identification of distinct element types and calculations were made to determine element ratios and minimum number of elements in a single apparatus. Three element groups, M, S and P, were recognised for all five species and their relative ratio is indicative of apparatuses consisting of at least 21 elements. However, the number of element types and their distribution varies between the species. The four bicostate species, P. rectus, P. parvibasis, P. graeai and P. robustus, have similar morphological characters and are believed to belong to the same evolutionary lineage. They possessed apparatuses consisting of M, Sa, Sb1, Sb2, Sc, Pa and Pb elements. By contrast, the multicostate species P. calceatus is morphologically different and had an apparatus consisting of M1, M2, Sa, Sb, Sc, “Sd”, Pa, Pb1 and Pb2 elements. These differences indicate that P. calceatus is not so closely related to the other species, possibly representing a separate evolutionary lineage, and may warrant an exclusive generic assignment.

Scotland has a magmatic record covering much of the period 3100–50 Ma. In this review, we pull together information on Scotland's igneous rocks into a continuous story, showing how magmatic activity has contributed to the country's structural development and assessing whether the effects of older magmatic events can be recognised in later episodes.

The oldest igneous rocks are part of supracrustal sequences within the Lewisian Gneiss Complex, formed when Scotland was part of the supercontinent Kenorland. The supracrustal rocks were intruded between 3100 and 2800 Ma by granodiorites and tonalites, which were metamorphosed and deformed in a major tectonothermal event between 2700 and 2500 Ma. The break-up of Kenorland (2400–2200 Ma) was marked by the intrusion of mafic dyke swarms of tholeiitic affinity. The convergence of continental masses to form the supercontinent Columbia resulted, at ∼1900 Ma, in a series of subduction-related volcanic rocks and gabbro–anorthosite masses. Subsequent continent–continent collision formed a series of granite–pegmatite sheets at ∼1855 Ma and ∼1675 Ma and reworked much of the earlier rocks in the amphibolite facies. Columbia was breaking up by 1200 Ma, an event marked by remnants of basaltic magmatism in the NW of the country. Re-assembly of the continental fragments to form the supercontinent Rodinia resulted in the Grenville Orogeny, which in Scotland was marked by basement reworking but no confirmed magmatic activity. Early attempts to split Rodinia produced a rift-related, bimodal, mafic–felsic sequence in the Moine Supergroup of the Northern Highlands, at least some of the mafic rocks having mid-ocean ridge basalt affinities. Crustal thickening during a disputed orogenic event, the Knoydartian, may have caused regional migmatisation. The final break-up of Rodinia occurred in Scotland at ∼600 Ma, when very extensive tholeiitic magmatism characterised the later parts of the Dalradian Supergroup, while a series of granites intruded the Moine and Dalradian successions.

Ordovician and Silurian times saw the closure of the Iapetus Ocean and the convergence of Laurentia, Avalonia and Baltica. The collision of a major arc system with Laurentia caused the Grampian event (480–465 Ma) of the Caledonian Orogeny, marked by ophiolite obduction, the generation of (largely) anatectic granites, volcanism in the Midland Valley and Southern Uplands, and intrusion of a major gabbro–granite suite in the NE. The late-Caledonian events (435–420 Ma) were largely post-collisional and were marked by the emplacement of alkaline igneous intrusions in the NW, calc-alkaline granitic intrusions over much of the country, widespread volcanic activity and regional dyke swarms. Laurentia, Avalonia and Baltica amalgamated to form the supercontinent Laurussia. Magmatic activity recommenced at 350 Ma, when intra-plate alkaline magmatism affected much of southern Scotland, in particular, through into Permian times. The alkaline magmatism was interrupted at ∼295 Ma by a short-lived event in which tholeiitic magmas were intruded as sills and dykes in a swarm ∼200 km wide. In the early Palaeogene, lithospheric attenuation related to proto-North Atlantic formation and the splitting of Pangaea was complemented by the arrival of the Iceland mantle plume. Huge volumes of mafic magma were emplaced as lava fields, central complexes and regional swarms, locally increasing crustal thickness by 30%

The generation of granitic magmas begins with melting in the lower crust, under active participation of the underlying mantle. Thermally driven, melting is a pervasive and continuous process that develops over a wide region. In contrast, the building of a granitic pluton is highly discontinuous in time and space. Several inputs of magma, sometimes with a different chemical compositions, are focused toward a region where they accumulate, forming a large pluton, often separated by some 50 km from an adjacent one. The switch from a continuous to a discontinuous process represents a fundamental point of magma generation. It gives place to the modified model m(M-SAE), in which the mantle (m) and Melting (M) are separated from the Segregation (S), Ascent (A) and Emplacement (E) modes. Discontinuities result from non-linear processes that develop during segregation and ascent of the magma. They rely on the non-linear rheology of partially molten rocks. Thresholds control the change from a solid-like to liquid-like behaviour of the magma. In between, the rheology exhibits sudden jumps between states. Because two phases continuously coexist (matrix and melt), strain is highly partitioned between them. This may induce highly discontinuous melt segregation, which needs both pure and simple shear to develop. Melt focusing is controlled by the viscosity contrast between the two phases. It gives rise to different compaction lengths depending on the region, a partially melting source or a nearly brittle crust, where it develops. Because ascent and emplacement are discontinuous in time, this allows the crust to relax, avoiding the room problem for a pluton intruding the upper crust. Intermediate magma chambers could develop with different temperature and magma composition. They could be the place of enhanced magma mixing. Finally, the stress conditions, which differ for each tectonic setting, influence the shape of the granitic body.

A sauropod dinosaur tooth has been recovered from the Kilmaluag Formation (Middle Jurassic: late Bathonian) of Strathaird, Isle of Skye, Western Scotland. It represents the first dinosaur tooth to be described from Scotland. The combination of character states present indicates that it cannot be referred to either Cetiosaurus or Cardiodon and that it may pertain to a basal eusauropod or a basal titanosauriform. A diversity of sauropods was present in the UK in the Middle Jurassic and these faunas have the potential to illuminate many aspects of sauropod evolutionary history.

Additional mechanical preparation of the type material of the temnospondyl amphibian Perryella olsoni (Lower Permian, Wellington Formation, Oklahoma) highlights new cranial and postcranial features and provides additional data on previously known structures. Important new information is available for the quadrate, palatal bones and their associated dentition, parasphenoid, and appendicular skeleton. The revised diagnosis and redescription of Perryella provide the basis for a re-evaluation of its systematic affinities. A cladistic analysis of (mostly) Carboniferous and Permian temnospondyls, together with several Devonian and Carboniferous stem tetrapod outgroups, supports a single origin for temnospondyls. The sequence of branching events within temnospondyls consists of: (1) a paraphyletic Edopoidea; (2) a clade of Zatracheidae, Eryopidae, and basal Archegosauriformes; (3) a monophyletic Dvinosauria; and (4) a monophyletic Dissorophoidea. Perryella is nested within Dvinosauria in an intermediate position between Trimerorhachidae and Dvinosauroidea.

Since the late 1980s an extensive programme of trenching/borehole drilling has been undertaken in order to study the Lower Devonian ‘Lower Old Red Sandstone’ deposits of the Rhynie outlier in the Grampian Highlands of Scotland. The boreholes have provided new information on the stratigraphical succession and geological structure of the Rhynie outlier, both of which were hitherto poorly understood due to the paucity of good surface exposure and the complex geological relationships of the deposits. One hundred and eighteen palynological samples were collected, representing much of the stratigraphical sequence of the inlier, of which 106 were productive. Productive samples yield assemblages of well preserved palynomorphs, dominated by spores and phytodebris, but also containing arthropod cuticle and rare freshwater algal remains. The spore assemblages are systematically described and two new genera and six new species proposed. They are similar throughout the sequence and the spores belong to the polygonalis–emsiensis Spore Assemblage Biozone of Richardson & McGregor (1986) and the PoW Oppel Zone (possibly Su Interval Zone) of Streel et al. (1987), indicating an early (but not earliest) Pragian–?earliest Emsian age range, that may possibly be restricted to latest Pragian–?earliest Emsian. The palynomorph assemblages contain only terrestrial forms, supporting sedimentological interpretation of the deposits as ‘Lower Old Red Sandstone’ fluviatile and lacustrine deposits, with occasional extrusive volcanics and volcaniclastic sediments intercalated. The palynomorphs are of variable thermal maturity (within and between samples), probably reflecting differential heating associated with the complex volcanic/hydrothermal system. The new palynological data provide, for the first time, a reliable biostratigraphical age for the deposits, and suggest that they accumulated relatively rapidly. Spore biostratigraphy and thermal maturity studies facilitate correlation of the tectonically complex deposits, and shed light on other aspects of the geological history of the outlier. The palynomorph assemblages also aid interpretation of the biota of the Rhynie basin, including the exceptionally preserved biotas of the Rhynie and Windyfield cherts.

Previously described and new specimens of the anthracosaur Silvanerpeton miripedes from the Scottish Viséan of East Kirkton yield important new data which allow us to provide a more complete reconstruction of the skull roof, palate, braincase and lower jaw. A stout sacral rib and an incompletely ossified tarsus with a subquadrangular intermedium are also recorded for the first time. A remarkably well preserved humerus in extensor view shows similarities with humeri of immature specimens of the embolomere Proterogyrinus. A new cladistic analysis, built from combining characters used in two recent matrices, places Silvanerpeton in a basal position relative to embolomeres and more derived stem amniotes. Data from Silvanerpeton inform character polarity near the base of the amniote total group. We discuss some morphofunctional implications of character changes at the root of total group amniotes, acquisition of terrestrial habits, and patterns of early disparity in this clade.

Two large fossil plants are described from the Givetian (Middle Devonian) Eday Flags, South Ronaldsay, Orkney Isles, northern Scotland. Fossils with branches joined to stems of this age are rare. Each specimen comprises a robust and tapering main trunk from which numerous closely spaced branches arise distally. Although poorly preserved such that generic identifications are not possible, both specimens display the characteristic architecture of the plant order Pseudosporochnales (Cladoxylopsida). The newly discovered specimens demonstrate a variation in size and form that adds further data to the understanding of the ontogeny of these enigmatic plants, complementing recent morphological and anatomical findings. These specimens, in combination with many more fragmentary fossils of the same kind from the Orcadian sedimentary basin, add to our knowledge of the Givetian floras of Britain, and show that large plants with upright stems were present in the Middle Devonian landscape of Scotland.

Although sophisticated geochemical studies tell us that tonolite–trondhjemite–granodiorite (TTG) plutonic complexes must be formed by partial melting of metabasaltic source material, they cannot tell us the tectonic regime in which this crust was formed, nor how large volumes of TTG magma can be generated. This study suggests that a solution to TTG arc crust formation requires a strongly interdisciplinary approach, to resolve the tectonic setting (slab melt verses mafic lowermost crust sources), the time and length scales for melting and extraction, and the role of melt segregation mechanisms in the formation of both Archean TTGs and more recent adakite-like magmas. The aim of this paper is to present an experimental approach which, when coupled with numerical models, allows some of these issues to be addressed. The experiments are designed to reproduce the local changes in bulk composition that are predicted to occur in response to buoyancy-driven melt segregation along grain edges and associated compaction of the solid residue. The preliminary study presented here documents the changes we observe in the melt composition and melt and solid phase modes between earlier direct partial melting and the new segregation equilibration experiments on metabasalt bulk compositions. The results suggest that if dynamic melt segregation and equilibrium processes are active, they may modify the normally robust geochemical indicators, such as Mg-numbers, which are typically used to develop models of TTG petrogenesis.

Restoration of the morphology of Angustidontus seriatus Cooper, 1936 based on complete specimens from the Famennian of Nevada and Poland, supports its affinity to the coeval alleged decapod Palaeopalaemon and suggests eocarid (possibly also peracarid) affinities. Predatory adaptation of the thoracopods and the relatively short pereion make this crustacean only superficially resemble the archaeostomatopod hoplocarids, because the large grasping appendages of Angustidontus represent the first, rather than second, maxillipeds and acted in the opposite direction: downward. Another similar adaptation of the antennae in the Viséan Palaemysis suggests a widespread adaptation to predation among early eumalacostracans. The large sample collected from the Woodruff Formation of Nevada permits biometric characterisation of the grasping maxillipeds of Angustidontus, showing that their highly variable morphology should not be used to define species. All previously described species are therefore here synonymised with A. seriatus. Differences in gnathobases of mandibles found in articulated specimens in Nevada, and associated with isolated maxillipeds and articulated specimens possibly representing another unnamed species in Poland, suggest that such mandibles may eventually prove to be taxonomically more significant.

The relationship between plutonic and volcanic rocks is central to understanding the geochemical evolution of silicic magma systems, but it is clouded by ambiguities associated with unravelling the plutonic record. Here we report an integrated U–Pb, O and Lu–Hf isotope study of zircons from three putative granitic–volcanic rock pairs from the Lachlan Fold Belt, southeastern Australia, to explore the connection between the intrusive and extrusive realms. The data reveal contrasting petrogenetic scenarios for the S- and I-type pairs. The zircon Hf–O isotope systematics in an I-type dacite are very similar to those of their plutonic counterpart, supporting an essentially co-magmatic relationship between these units. The elevated δ18O of zircons in these I-type rocks confirm a significant supracrustal source component. The S-type volcanic rocks are not the simple erupted equivalents of the granites, although the extrusive and plutonic units can be related by open-system magmatic evolution. Zircons in the S-type rocks define covariant εHf–δ18O arrays that attest to mixing or assimilation processes between two components, one being the Ordovician metasedimentary country rocks, the other either an I-type magma or a mantle-derived magma. The data are consistent with models involving incremental melt extraction from relatively juvenile magmas undergoing open-system differentiation at depth, followed by crystal-liquid mixing upon emplacement in shallow magma reservoirs, or upon eruption. The latter juxtaposes crystals with markedly different petrogenetic histories and determines whole-rock geochemical and textural properties. This scenario can explain the puzzling decoupling between the bulk rock isotope and geochemical compositions commonly observed for granite suites.

Isotope ratios of elements such as Sr, Nd, Pb and Hf can be used as tracers of magmatic sources and processes. Analytical capabilities have evolved so that isotope ratios can now be analysed in situ, and isotopic tracers can therefore be used within single minerals to track the changing magmatic environment in which a given mineral grew. This contribution shows that Sr isotope ratios in feldspars that make up plutonic rocks will typically preserve initial isotopic variations, provided precise and accurate age corrections can be applied. Variations in initial isotope ratio can give a core-to-rim record of magmatic evolution and can be used to diagnose open system events such as contamination and magma recharge and mixing.

New single grain Sr isotope data are presented from the Dais Intrusion, Antarctica, which reflect an open system origin for the crystals. The crystal cargo appears to be aggregated and assembled during transport and emplacement. This model, as opposed to a magma body crystallising post emplacement, may be more applicable to plutonic rocks in general, and is testable using the in situ isotopic determination methods described here.

A Deep Hot Zone develops when numerous mafic sills are repeatedly injected at Moho depth or are scattered in the lower crust. The melt generation is numerically modelled for mafic sill emplacement geometries by overaccretion, underaccretion or random emplacement, and for intrusion rates of 2, 5 and 10mm/yr. After an incubation period, melts are generated by incomplete crystallisation of the mafic magma and by partial melting of the crust. The first melts generated are residual from the mafic magmas that have low solidi due to concentration of H20 in the residual liquids. Once the solidus of the crust is reached, the ratio of crustal partial melt to residual melt increases to a maximum. If wet mafic magma, typical of arc environments, is injected in an amphibolitic crust, the residual melt is dominant over the partial melt, which implies that the generation of I-type granites is dominated by the crystallisation of mafic magma originated from the mantle and not by the partial melting of earlier underplated material. High ratios of crustal partial melt over residual melt are reached when sills are scattered in a metasedimentary crust, allowing the generation of S-type granites. The partial melting of a refractory granulitic crust intruded by dry, high-T mafic magma is limited and subordinate to the production of larger amount of residual melt in the mafic sills. Thus the generation of A-type granites by partial melting of a refractory crust would require a mechanism of selective extraction of the A-type melt.

Several mesosocopic structures are consistent with mechanical accumulation of crystals and movement of melt in granite magmas, as well as compaction and shear of crystal-melt aggregates, concentrations of microgranitoid enclaves indented by megacrysts, and concentrations of crystals of the same mineral with different crystallisation histories. Evidence for crystal and enclave accumulation is shown clearly in mafic and silicic layered intrusions (MASLI-type granite plutons), for example, the Kameruka Granodiorite, Bega Batholith, south-eastern Australia.

Crystal accumulations with interstitial liquid may become mobile in a magma chamber, owing to instabilities in the host magma caused by seismic and replenishment events or thermal and buoyancy variations. This remobilised material may intrude other parts of the chamber, as well as earlier-formed cumulates and even wall-rocks, as dykes, tubes, troughs and pipes. Marked concentrations of accessory and mafic minerals may also develop in these structures. Interstitial melt may also be extracted from accumulated aggregates, intruding and disrupting the aggregates. Spectacular examples of these various structures are preserved in the Tuolumne Batholith, California. Detailed mechanisms for the formation of many of the structures are not well understood, though the formation of cumulates in vertical layers suggests that sorting and filter pressing during flow and resulting strain of crystal mushes may play important roles.

The generation of granitic magmas begins with melting in the lower crust, under active participation of the underlying mantle. Thermally driven, melting is a pervasive and continuous process that develops over a wide region. In contrast, the building of a granitic pluton is highly discontinuous in time and space. Several inputs of magma, sometimes with a different chemical compositions, are focused toward a region where they accumulate, forming a large pluton, often separated by some 50 km from an adjacent one. The switch from a continuous to a discontinuous process represents a fundamental point of magma generation. It gives place to the modified model m(M-SAE), in which the mantle (m) and Melting (M) are separated from the Segregation (S), Ascent (A) and Emplacement (E) modes. Discontinuities result from non-linear processes that develop during segregation and ascent of the magma. They rely on the non-linear rheology of partially molten rocks. Thresholds control the change from a solid-like to liquid-like behaviour of the magma. In between, the rheology exhibits sudden jumps between states. Because two phases continuously coexist (matrix and melt), strain is highly partitioned between them. This may induce highly discontinuous melt segregation, which needs both pure and simple shear to develop. Melt focusing is controlled by the viscosity contrast between the two phases. It gives rise to different compaction lengths depending on the region, a partially melting source or a nearly brittle crust, where it develops. Because ascent and emplacement are discontinuous in time, this allows the crust to relax, avoiding the room problem for a pluton intruding the upper crust. Intermediate magma chambers could develop with different temperature and magma composition. They could be the place of enhanced magma mixing. Finally, the stress conditions, which differ for each tectonic setting, influence the shape of the granitic body.