Hostname: page-component-586b7cd67f-t7czq Total loading time: 0 Render date: 2024-11-30T16:35:24.176Z Has data issue: false hasContentIssue false
  • English
  • Français

Direct Orange 34 dye fixation by modified kaolin

Published online by Cambridge University Press:  02 July 2018

H. Chargui ,
W. Hajjaji ,
J. Wouters ,
J. Yans  and
F. Jamoussi
H. Chargui
Affiliation:
Laboratory Georessources, CERTE, BP 273, 8020 Soliman, Tunisia
W. Hajjaji*
Affiliation:
LabTEN Natural Water Treatment Laboratory, CERTE, BP 273, 8020 Soliman, Tunisia
J. Wouters
Affiliation:
Department of Chemistry, University of Namur, 61 rue de Bruxelles, 5000 Namur, Belgium
J. Yans
Affiliation:
Department of Geology, ILEE, Institute of Life, Earth and Environment, University of Namur, 61 rue de Bruxelles, 5000 Namur, Belgium
F. Jamoussi
Affiliation:
Laboratory Georessources, CERTE, BP 273, 8020 Soliman, Tunisia
*
*E-mail: [email protected]
Get access Rights & Permissions [Opens in a new window]

Abstract

The present study investigated the adsorption behaviour of Direct Orange 34, a highly toxic dye used in textile industries in Tunisia, on modified kaolinite-rich clays. A kaolin from the Sidi Bader (SDB) area was activated with hydrochloric acid to create the activated clay referred to hearafter as SDBa, or treated with FeSO4•7H2O to obtain its Fe-saturated form, Fe-SDB. The adsorbents were characterized by X-ray diffraction, X-ray fluorescence, transmission electron microscopy, BET surface area and zeta-potential measurements. The equilibrium adsorption data were analysed using the Langmuir and Freundlich isotherms. The estimated adsorption capacities (qm) for the dye were improved in the Fe-loaded samples. The good fit (R2 = 0.99) with a pseudo-second order expression suggests that the adsorption process could be effective following a chemisorption mechanism. At acidic pH, the optimum dye-retention rate was achieved for SDB (83%) after 60 min. The uptake decreased at neutral pH and increased again in alkaline media. This behaviour might be explained by the formation of covalent bonds between the OH radicals on the external surface and the negatively charged dye molecules. On the other hand, Fe impregnation increased the zeta potential of kaolinite, leading to a greater adsorption capacity compared to its natural and acid-activated counterparts. In addition, the adsorption rate increased when increasing the suspension temperature from 283 to 313 K. The modified kaolinite-rich materials showed satisfactory affinity for adsorbing this reactive dye.

Keywords

kaoliniteDirect Orange 34adsorptionmodified claysTunisia
Type
Article
Information
Clay Minerals , Volume 53 , Issue 2 , June 2018 , pp. 271 - 287
Copyright
Copyright © Mineralogical Society of Great Britain and Ireland 2018 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Footnotes

Associate Editor: Miroslav Pospíšil

References

REFERENCES

Adebowale, K.O., Unuabonah, E.I. & Olu-Owolabi, B.I. (2008) Kinetic and thermodynamic aspects of the adsorption of Pb2+ and Cd2+ ions on tripolyphosphate-modified kaolinite clay. Chemical Engineering Journal, 136, 99–107.Google Scholar
Akgül, M. (2014) Enhancement of the anionic dye adsorption capacity of clinoptilolite by Fe3+ grafting. Journal of Hazardous Materials, 267, 1–8.Google Scholar
Alkan, M., Demirbas, Ö. & Dogan, M. (2005) Electrokinetic properties of kaolinite in mono and multivalent electrolyte solutions. Microporous and Mesoporous Materials, 83, 51–59.Google Scholar
Baskaralingam, P., Pulikesi, M., Elango, D., Ramamurthi, V. & Sivanesan, S. (2006) Adsorption of acid dye onto organobentonite. Journal of Hazardous Materials, B128, 138–144.Google Scholar
Benguella, B. & Yacouta-Nour, A. (2009) Elimination des colorants acides en solution aqueuse par la bentonite et le kaolin. Science direct, C. R. Chimie, 12, 762–771.Google Scholar
Bergaya, F. & Vayer, M. (1997) CEC of clays: measurement by adsorption of a copper ethylenediamine complex. Applied Clay Science, 12, 275–280.Google Scholar
Bhattacharyya, K.G. & Sharma, A. (2004) Azardirachta Indica leaf powder as an effective biosorbent for dyes: a case study with aqueous Congo red solution. Environmental Management, 71, 217–229.Google Scholar
Bhattacharyya, K.G., SenGupta, S. & Kumar Sarma, G. (2014) Interactions of the dye, Rhodamine B with kaolinite and montmorillonite in water. Applied Clay Science, 99, 7–17.Google Scholar
Brunauer, S., Emmett, P.H. & Teller, E. (1938) Adsorption of gases in multimolecular layers. Journal of the American Chemical Society, 60, 309–319.Google Scholar
Bulut, Y. & Aydın, H. (2006) A Kinetics and thermodynamics study of Methylene Blue adsorption on wheat shells. Desalination, 194, 259–267.Google Scholar
Bulut, E., Ozacar, M. & Ayhan Sengil, I. (2008) Equilibrium and kinetic data and process design for adsorption of Congo Red onto bentonite. Journal of Hazardous Materials, 154, 613–622.Google Scholar
Chaari, I., Feki, M., Medhioub, M., Bouzid, J., Fakhfakh, E. & Jamoussi, F. (2009) Adsorption of a textile dye “Indanthrene Blue RS (C.I. Vat Blue 4)” from aqueous solutions onto smectite-rich clayey rock. Journal of Hazardous Materials, 172, 1623–1628.Google Scholar
Chaari, I., Moussi, B. & Jamoussi, F. (2015) Interactions of the dye, C.I. direct orange 34 with natural clay. Journal of Alloys and Compounds, 647, 720–727.Google Scholar
Couto, S.R. (2009) Dye removal by immobilised fungi. Biotechnology Advances, 27, 227–235.Google Scholar
Das, L. & Basu, J.K. (2014) Photocatalytic treatment of textile effluent using titania–zirconia nano composite catalyst. Journal of Industrial and Engineering Chemistry, 24, 245–250.Google Scholar
Doğan, M. & Alkan, M. (2003) Adsorption kinetics of methyl violet onto perlite. Chemosphere, 50, 517–528.Google Scholar
Doğan, M., Alkan, M., Türkyılmaz, A. & Özdemir, Y. (2004) Kinetics and mechanism of removal of methylene blue by adsorption onto perlite. Journal of Hazardous Materials, 109, 141–148.Google Scholar
Doğan, M., Alkan, M., Demirbas, O., Ozdemir, Y. & Ozmetin, C. (2006) Adsorption kinetics of maxilon blue GRL onto sepiolite from aqueous solutions. Chemical Engineering Journal, 124, 89–101.Google Scholar
Doğan, M., Karaoğlu, M.H. & Alkana, M. (2009) Adsorption kinetics of maxilon yellow 4GL and maxilon red GRL dyes on kaolinite. Journal of Hazardous Materials, 165, 1142–1151.Google Scholar
Errais, E., Duplay, J., Darragi, F., M'Rabet, I., Aubert, A., Huber, F. & Morvan, G. (2011) Efficient anionic dye adsorption on natural untreated clay: kinetic study and thermodynamic parameters. Desalination, 275, 74–81.Google Scholar
Errais, E., Duplaya, J., Elhabiri, M., Khodjac, M., Ocampod, R., Baltenweck-Guyote, R. & Darragi, F. (2012) Anionic RR120 dye adsorption onto raw clay: Surface properties and adsorption mechanism. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 403, 69–78.Google Scholar
Faria, E.H., Ricci, G.P., Marcal, L., Nassar, E.J., Vicente, M.A., Trujillano, R., Gil, A., Korili, S.A., Ciuffi, K.J. & Calefi, P.S. (2012) Green and selective oxidation reactions catalyzed by kaolinite covalently grafted with Fe(III) pyridine-carboxylate complexes. Catalysis Today, 187, 135–149.Google Scholar
Farmer, V.C., Fraser, A.R. & Tait, J.M. (1979) Characterization of the chemical structures of natural and synthetic aluminosilicate gels and sols by infrared spectroscopy. Geochimica et Cosmochimica Acta, 43, 1417–1420.Google Scholar
Forgacs, E., Cserháti, T. & Oros, G. (2004) Removal of synthetic dyes from wastewaters: a review. Environment International, 30, 953–971.Google Scholar
Freundlich, H.M.F. (1906) Over the adsorption in solution. Journal of Physical Chemistry, 57, 385–471.Google Scholar
Fu, Y. & Viraraghavan, T. (2001) Fungal decolorization of dye wastewaters. Bioresource Technology, 79, 251–262.Google Scholar
Fungaro, D.A. & Bruno, M. (2009) Removal of methylene blue from aqueous solution using zeolite synthesized from different coal fly ashes samples. Química Nova, 32, 955–959.Google Scholar
Gonzalez-Pradas, E., Villafranca-Sanchez, M., Valverde-Garcia, A. & Socias-Viciana, M. (1998) Removal of tetramethyl thiuram disulphide from aqueous solution by chemically modified bentonite. Journal of Chemical Technology and Biotechnology, 42, 105–112.Google Scholar
Gregg, S.J. & Sing, K.S.W. (1982) Adsorption, Surface Area and Porosity, 2. Academic Press, London.Google Scholar
Gundogan, R., Acemioglu, B. & Alma, M.H. (2004) Copper (II) adsorption from aqueous solution by herbaceous peat. Journal of Colloid and Interface Science, 269, 303–309.Google Scholar
Guo, H., Zhang, X., Cui, M.H., Sharma, R., Yang, N.L. & Akins, D.L. (2005) Magnetic ordering of ferric oxide within SiO2-based mesoporous materials. Materials Research Bulletin, 40, 1713–1725.Google Scholar
Gupta, V.K. & Suhas, (2009) Application of low-cost adsorbents for dye removal: A review. Journal of Environmental Management, 90, 2313–2342.Google Scholar
Gupta, V.K., Mittal, A., Krishnan, L. & Gajbe, V. (2004) Adsorption kinetics and column operations for the removal and recovery of malachite green from wastewater using bottom ash. Separation and Purification Technology, 40, 87–96.Google Scholar
Gurses, A., Dogar, C., Yalcin, M., Akyildiz, M., Bayrak, R. & Karaca, S. (2006) The adsorption kinetics of the cationic dye, methylene blue, onto clay. Journal of Hazardous Materials, 131, 217–228.Google Scholar
Hajjaji, W., Ganiyu, S.O., Tobaldi, D.M., Andrejkovičová, S., Pullar, R.C., Rocha, F. & Labrincha, J.A. (2013) Natural Portuguese clayey materials and derived TiO2-containing composites used for decolouring methylene blue (MB) and orange II (OII) solutions. Applied Clay Science, 83–84, 91–98.Google Scholar
Hall, K.R., Eagleton, L.C., Acrivos, A. & Vermeulen, T. (1966) Pore- and solid-diffusion kinetics in fixed-bed adsorption under constant-pattern. Industrial Engineering Chemistry Fundamentals, 5, 212–223.Google Scholar
Hamdi, N. & Srasra, E. (2009) Retention of fluoride from industrial acidic wastewater and naf solution by three Tunisian clayey soils. Research Report Fluoride, 42, 39–45.Google Scholar
Han, R., Ding, D., Xu, Y., Zou, W., Wang, Y., Li, Y. & Zou, L. (2008) Use of rice husk for the adsorption of Congo red from aqueous solution in column mode. Bioresource Technology, 99, 2938–2946.Google Scholar
Hu, Q.H., Qiao, S.Z., Haghseresht, F., Wilson, M.A. & Lu, G.Q. (2006) Adsorption study for removal of basic red dye using bentonite. Industrial and Engineering Chemistry Research, 45, 733–738.Google Scholar
Innocenzi, P., Falcaro, P., Grosso, D. & Babonneau, F. (2003) Order-disorder transitions and evolution of silica structure in self-assembled mesostructured silica films studied by FTIR spectroscopy. Journal of Physical Chemistry B, 107, 4711–4717.Google Scholar
Karaoğlu, H.M., Doğan, M. & Alkan, M. (2010) Kinetic analysis of reactive blue 221 adsorption on kaolinite. Desalination, 256, 154–165.Google Scholar
Katranas, T.K., Vlessidis, A.G., Tsiatouras, V.A., Triantafyllidis, K.S. & Evmiridis, N.P. (2003) Dehydrogenation of propane over natural clinoptilolite zeolites. Microporous and Mesoporous Materials, 61, 189–198.Google Scholar
Khanikar, N. & Bhattacharyya, K. G. (2013) Cu(II)-kaolinite and Cu(II) montmorillonite as catalysts for wet oxidative degradation of 2 chlorophenol, 4-chlorophenol and 2,4-dichlorophenol. Chemical Engineering Journal, 233, 88–97.Google Scholar
Khosravi, M. & Azizian, S., (2013) Adsorption of anionic dyes from aqueous solution by iron oxide nanospheres. Journal of Industrial and Engineering Chemistry, 20, 2561–2567.Google Scholar
Komadel, P. & Madejová, J. (2006) Acid activation of clay minerals. Developments in Clay Science, 1, 263–287.Google Scholar
Kumar, K.V., Ramamurthi, V. & Sivanesan, S. (2005) Modeling the mechanism involved during the sorption of methylene blue onto fly ash. Journal of Colloid and Interface Science, 284, 14–21.Google Scholar
Lagergren, S. (1898) About the theory of so-called adsorption of soluble substances. Kungliga Svenska, Vetenskapsakad Handlingar, 24, 1–39.Google Scholar
Langmuir, I. (1918) Adsorption of gases on plain surfaces of glass mica platinum. Journal of American Chemical Society, 40, 1361–1403.Google Scholar
Li, F. (2013) Layer-by-layer loading iron onto mesoporous silica surfaces: synthesis, characterization and application for As(V) removal. Microporous and Mesoporous Materials, 171, 139–146.Google Scholar
Li, Y., Gao, B., Wu, T., Wang, B. & Li, X. (2009) Adsorption properties of aluminum magnesium mixed hydroxide for the model anionic dye Reactive Brilliant Red K-2BP. Journal of Hazardous Materials, 164, 1098–1104.Google Scholar
Li, Y., Sun, N., Li, L., Zhao, N., Xiao, F., Wei, W., Sun, Y. & Huang, W. (2013) Grafting of amines on ethanol-extracted SBA-15 for CO2 adsorption. Materials, 6, 981–999.Google Scholar
Liang, C.Z., Sun, S.P., Li, F.Y., Ong, Y.K. & Chung, T.S. (2014) Treatment of highly concentrated wastewater containing multiple synthetic dyes by a combined process of coagulation/flocculation and nanofiltration. Journal of Membrane Science, 469, 306–315.Google Scholar
López-Galindo, A., Torres-Ruiz, J. & Gonzalez López, J.M. (1996) Mineral quantification in sepiolite-palygorskite deposits using X-ray diffraction and chemical data. Clay Minerals, 31, 217–224.Google Scholar
Madejová, J. (2003) FTIR techniques in clay mineral studies. Vibrational Spectroscopy, 31, 1–10.Google Scholar
Michot, C., Baril, D. & Armand, M. (1995) Polyimide-polyether mixed conductors as switchable materials for electrochromic devices. Solar Energy Materials and Solar Cells, 39, 289–299.Google Scholar
Moussi, B., Medhioub, M., Hatira, N., Yans, J., Hajjaji, W., Rocha, F., Labrincha, J.A. & Jamoussi, F. (2011) Identification and use of white clayey deposits from the area of Tamra (northern Tunisia) as ceramic raw materials. Clay Minerals, 46, 165–175.Google Scholar
Nagarethinam, K. & Mariappan, M. (2002) Adsorption of Congo red on various activated carbons. Water, Air & Soil Pollution, 138, 289–305.Google Scholar
Natarajan, S., Bajaj, H.C. & Tayade, R.J. (2018) Recent advances based on the synergetic effect of adsorption for removal of dyes from waste water using photocatalytic process. Journal of Environmental Science, 65, 201–222.Google Scholar
O'Neill, C., Hawkes, F.R., Hawkes, D.L., Lourenço, N.D., Pinheiro, H.M. & Delée, W. (1999) Colour in textile effluents – sources, measurement, discharge consents and simulation: A review. Journal of Chemical Technology and Biotechnology, 74, 1009–1018.Google Scholar
Ogugbue, C.J. & Sawidis, T. (2011) Bioremediation and detoxification of synthetic wastewater containing triarylmethane dyes by aeromonas hydrophila isolated from industrial effluent. Biotechnology Research International, doi: 10.4061/2011/967925.Google Scholar
Orfao, J., Silva, A., Pereira, J., Barata, S., Fonseca, I. & Faria, P. (2006) Adsorption of a reactive dye on chemically modified activated carbons – influence of pH. Journal of Colloid and Interface Science, 296, 480–489.Google Scholar
Pandey, A., Singh, P. & Iyengar, L. (2007) Bacterial decolorization and degradation of azo dyes. International Biodeterioration & Biodegradation, 59, 73–84.Google Scholar
Przystaś, W., Zabłocka-Godlewska, E. & Grabińska-Sota, E. (2012) Biological removal of azo and triphenylmethane dyes and toxicity of process by-products. Water, Air & Soil Pollution, 223, 1581–1592.Google Scholar
Ravichandran, J. & Sivasankar, B. (1997) Properties and catalytic activity of acid modified montmorillonite and vermiculite clays. Clay Minerals, 45, 854–858.Google Scholar
Rezende, M.J.C. & Pinto, A.C. (2016) Esterification of fatty acids using acid-activated Brazilian smectite natural clay as a catalyst. Renewable Energy, 92, 171–177Google Scholar
Robinson, T., McMullan, G., Marchant, R. & Nigam, P. (2001) Remediation of dyes in textile effluent: a critical review on current treatment technologies with a proposed alternative. Bioresource Technology, 77, 247–255.Google Scholar
Rouvier, H. (1967) Sulfure et régime hydrodynamique du milieu de sédimentation. Exemple Tunisien: Le minerai de plomb du Koudiat Safra. Mineralium Deposita, 2, 38–43.Google Scholar
Samanta, S., Giri, S., Sastry, P.U., Mal, N.K., Manna, A. & Bhaumik, A. (2003) Synthesis and characterization of iron-rich highly ordered mesoporous Fe-MCM-41. Industrial & Engineering Chemistry Research, 42, 3012–3018.Google Scholar
Shahid, M., Shahid-ul-Islam, & Mohammad, F. (2013) Recent advancements in natural dye applications: A review. Journal of Cleaner Production, 53, 310–331.Google Scholar
Singh, D. (1998) Effect of different factors on the adsorption of phosphamidon on two different types of Indian soil. Adsorption Science and Technology, 16, 583–594.Google Scholar
Sun, S.P., Li, C.J., Sun, J.H., Shi, S.H., Fan, M.H. & Zhou, Q. (2009) Decolorization of an azo dye Orange G in aqueous solution by Fenton oxidation process: effect of system parameters and kinetic study. Journal of Hazardous Materials, 161, 1052–1057.Google Scholar
Tahir, S.S. & Rauf, N. (2006) Removal of cationic dye from aqueous solutions by adsorption onto bentonite clay. Chemosphere, 63, 1842–1842.Google Scholar
Tahri, N., Masmoudi, G., Ellouze, E., Jrad, A., Drogui, P. & Amar, R.B. (2012) Coupling microfiltration and nanofiltration processes for the treatment at source of dyeing-containing effluent. Journal of Cleaner Production, 33, 226–235.Google Scholar
Tsai, W.T., Lai, C.W. & Hsien, K.J. (2004) Adsorption kinetics of herbicide paraquat from aqueous solution onto activated bleaching earth. Chemosphere, 55, 829–837.Google Scholar
Ugochukwu, U.C., Jones, M.D., Head, I.M., Manning, D.A.C. & Fialips, C.I (2014) Effect of acid activated clay minerals on biodegradation of crude oil hydrocarbons. International Biodeterioration & Biodegradation, 88, 185–191.Google Scholar
Vimonses, V., Jina, B., Chow, C. & Saint, C. (2009) Enhancing removal efficiency of anionic dye by combination and calcination of clay materials and calcium hydroxide. Journal of Hazardous Materials, 171, 941–947.Google Scholar
Vimonses, V., Lei, S., Jin, B., Chow, C.W.K. & Saint, C. (2009) Kinetic study and equilibrium isotherm analysis of Congo red adsorption by clay materials. Chemical Engineering Journal, 148, 354–364.Google Scholar
Wang, S. & Li, H. (2005) Dye adsorption on unburned carbon: kinetics and equilibrium. Journal of Hazardous Materials, 126, 71–77.Google Scholar
Zevin, L.S. & Kimmel, G. (1995) Quantiative X-ray Diffractometry. Springer, New York.Google Scholar