Hostname: page-component-586b7cd67f-g8jcs Total loading time: 0 Render date: 2024-11-23T21:40:22.510Z Has data issue: false hasContentIssue false
  • English
  • Français

Twenty-Second British Commonwealth Lecture

Aeronautical Research in India

Published online by Cambridge University Press:  04 July 2016

S. Dhawan
S. Dhawan*
Affiliation:
Indian Institute of Science, Bangalore
Get access Rights & Permissions [Opens in a new window]

Extract

The Twenty-Second British Commonwealth Lecture, “Aeronautical Research in India”, was given by Dr. S. Dhawan, MA, BSc(Eng), MS, FRAeS, Director of the Indian Institute of Science, Bangalore, on 3rd November 1966. The Chair was taken by the President, Mr. A. D. Baxter, MEng, FRAeS, and the distinguished audience included His Excellency Dr. J. Mehta, High Commissioner for India.

Before the Lecture the President introduced Lord Caldecote, DSC, MA, FRAeS, immediate Past President of the Society of British Aerospace Companies Limited, who presented the four SB AC Scholarship Awards for 1966 to the recipients.

Introducing the Lecturer, Mr. Baxter said that the British Commonwealth Lecture had been established immediately after the Second World War to foster interest and understanding in aeronautical developments between Great Britain and her partners in the Commonwealth. He thought that object had been successfully achieved by the efforts of a long and distinguished list of lecturers, both from home and overseas; now they were to add another distinguished name to that list. Dr. Dhawan had taken his first degree in mathematics and physics at Lahore in 1938; in 1941 he obtained his MA from the Punjab University and, from the same university, his BSc in Engineering in 1944. After a period as an Assistant Supervisor with the Hindustan Aircraft Company, he was selected by the Government of India for advanced studies abroad in aeronautics. Dr. Dhawan had gone to the United States where he took a Masters Degree in Aeronautics at the University of Minnesota and a PhD in Aeronautics at the Californian Institute of Technology. Returning to India in 1951, he joined the Department of Aeronautics at the Indian Institute of Science, becoming Assistant Professor in 1952 and Professor and Head of the Department in 1955 and, since 1963 Director of the Institute.

Type
Research Article
Information
The Aeronautical Journal , Volume 71 , Issue 675 , March 1967 , pp. 149 - 184
Copyright
Copyright © Royal Aeronautical Society 1967

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Narayanamurthy, D. and Prasad, B. N. The Damping Capacity of some Indian Timbers. J Aeronaut Soc India, November 1949 and August 1951.Google Scholar
2.Narayanamurthy, D. Composite Wood and Adhesives in Aircraft. J Aeronaut Soc India, February 1958.Google Scholar
3.Ramamritham, S. and Narasimhan, R. A Note on the Properties of Himalayan Spruce and Fir and Andaman Dhup in Relation to Their Use in Aircraft Construction. J Aeronaut Soc India, May 1953.Google Scholar
4.Narayanamurthy, D. Some Indigenous Composite Wood Materials. J Aeronaut Soc India, November 1955.Google Scholar
5.Gurusahaney, H. J. and Ganesan, G. Strength Properties of Himalayan Spruce for Aircraft and Glider Construction. J Aeronaut Soc India, May 1958. Google Scholar
6.Ghatage, V. M.Characteristics of the 5 ft by 7 ft Closed Throat Wind Tunnel of the Indian Institute of Science, Bangalore. J Indian Inst Sci. 25B, Pt I, pp 1–12.Google Scholar
7.Ghatage, V. M.A Method of Calculating the Wall Correction for Elliptic Tunnels. Proc Indian Acad Sci 1945, 21.Google Scholar
8.Ghatage, V. M. and Ramana Rao, G. V.Measurements of Turbulence and Pitch of the Airstream in the 5 ft by 7 ft Tunnel of the Indian Institute of Science. J Indian Inst Sci 28B, Pt I, pp 1–9.Google Scholar
9.Mathews, C. W. Theoretical Study of Tunnel Boundary Lift Interference Due to Slotted Walls in the Presence of Trailing Vortex System of a Lifting Model. NACA TR 1221.Google Scholar
10.Krishnaswamy, T. N. Selection of Electric Drive for the 14 ft by 9 ft Wind Tunnel. J Aeronaut Soc India 7, 2, May 1955. Design of Six-Component Strain Gauge Balance for the 14 ft by 9 ft Wind Tunnel, Indian Institute of Science. J Aeronaut Soc India, May 1961.Google Scholar
11.Krishnaswamy, T. N.et al. Design and Characteristics of 14 ft by 9 ft Open Circuit Wind Tunnel. Proc Seminar on Aero Science, NAL Bangalore (1961).Google Scholar
12.Krishnaswamy, T. N. and Ramachandra, S. M. Fan System of the 14 ft by 9 ft Open Circuit Wind Tunnel of the Indian Institute of Science. J Aeronaut Soc India, May 1966.Google Scholar
13.Dhawan, S. Design and Operation of an Intermittent 1 in by 3 in Supersonic Wind Tunnel. J Aeronaut Soc India, February 1955.Google Scholar
14.Rao, D. M. and Ramachandra, S. M. Suction and Power Requirements of a Ventilated Wall Half-Nozzle at Transonic Speed. J Aeronaut Soc India, Nov 1958.Google Scholar
15.Rao, D. M. and Ramaswamy, M. A. Measurements of Two-Dimensional Zero Lift Interference of Ventilated Boundaries at Speeds up to Sonic. Z Angew Math Phys. XI, Fase4(1960).Google Scholar
16.Tirumalesa, D and Satyanarayana, B. An Experimental Study of Plenum Chamber Size on the Flow in a Slotted Wall Transonic Test Section. J Aeronaut Soc India, August 1960. An Experimental Study of the Interference Properties of a Slotted Wall Test Section at Transonic Speeds. J Aeronaut Soc India, November 1960. Study of Reduced Parameters in the Similarity Analyses of Interference in Ventilated Wall Transonic Wind Tunnels. J Aeronaut Soc India, August 1961.Google Scholar
17.Dhawan, S. Direct Measurements of Skin Friction. NACA TR 1121 (1963).Google Scholar
18.Rao, G. N. V.Method for Obtaining Minimum Noise in a General Purpose Hot-Wire Amplifier. J Scient Instrum 38 (December 1961).CrossRefGoogle Scholar
19.Parthasapathy, S. P. and Tritton, D. J.On the Impossibility of a Hot-Wire Anemometer for Use in Turbulent Flows. AIAA Journal Tech Note (1963).Google Scholar
20.Narasimha, R.On the Distribution of Intermittency in the Transition Region of a Boundary Layer. J Aeronaut Sci 24, 9 (1957). 17. Google Scholar
21.Dhawan, S. and Narasimha, R.Some Properties of Boundary Layer Flow during the Transition from Laminar to Turbulent Motion. J Fluid Mech 3, Pt IV (1958).Google Scholar
22.Schubauer, G. B. and Klebanoff, P. S. Contributions on the Mechanics of Boundary Layer Transition. NACA TN 3489, September 1955.Google Scholar
23.Emmons, H. W.The Laminar-Turbulent Transition in a Boundary Layer. J Aeronaut Sci 18 (July 1951).Google Scholar
24.Pantulu, P. V. Studies on Transition from Laminar to Turbulent Flow in a Pipe. Dept of Aeronautics, IISc, MSc Thesis (1962). To be published.Google Scholar
25.Lindgren, E. R.The Transition Process and Other Phenomenon in Viscous Flow. Arkiv Fys 12, 1 (1957) Stockholm.Google Scholar
26.Rotta, J.Experimenter Beitrag Zur Entstchung Turbulenter Stromung im Rohr. Ing-Arch 24, 4 (1956).CrossRefGoogle Scholar
27.Kovasznay, L. S. G.A New Look at Transition, Aeronautics and Astronautics, pp 161–172, Pergamon Press, 1960.Google Scholar
28.Rao, G. N. V. Transverse Curvature Effects on Boundary Layers. 1966. To be published.Google Scholar
29.Rao, G. N. V.Note on the Sufficient Conditions for the Stability of Axially Symmetric Flows to Axially Symmetric Disturbances. J Aerospace Sci 28, 3 (1961).Google Scholar
30.Badrinarayanan, M. A. Reverse Transition from Turbu lent to Laminar Flow in a Two-Dimensional Channel. 1966. To be published.Google Scholar
31.Narasimha, R. and Ojha, S. K. Singular Perturbation Analysis of Longitudinal Curvature Effects on Boundary Layers. AE Dept Report 66FM2 (1966). To be published.Google Scholar
32.Narasimha, R. and Vasantha, S. Laminar Boundary Layer on a Flat Plate at High Prandtl Numbers. To be published in Z Angew Math Phys(1966).Google Scholar
33.Narasimha, R. The Structure of the Distribution Function in Gas Kinetic Flows. Communicated to the 5th International Congress on Rarified Gas Dynamics, Oxford, June 1966.Google Scholar
34.Maeder, P. F. and Thommen, H. V. On the Boundary Layers at Perforated Walls. Z Angew Math Phys IXb(1958).Google Scholar
35.Ramayya, M. A. An Investigation on Turbulent Boundary Layers Over Ventilated Walls. Dept of Aeronautics, IISc, MSc Thesis (1964) (Unpublished).Google Scholar
36.Black, T. J. and Saranecki, A. J. The Turbulent Boundary Layer with Suction or Injection. ARC 20, 501 (October 1958).Google Scholar
37.Dhawan, S. and Vasudeva, B. R.The Pitot Tube Displacement Effect in Boundary Layer Flows. J Aeronaut Soc India, 10, 4 (November 1958).Google Scholar
38.Vasudeva, B. R.The Effect of Compressibility on the Reading of a Surface Pitot Tube used for Skin Friction Measurements. J Aero Soc India, 14, 4 (Nov 1962).Google Scholar
39.Badrinarayanan, M. A., An Experimental Investigation of Base Flows at Supersonic Speeds. Journal of the Royal Aeronautical Society, 65, 607 (July 1961).Google Scholar
40.Reid, J. and Hastings, R. Experiments on the Axi- Symmetric Flow over Afterbodies and Base at M = 2.0. RAE Aero Report 2628 (1959), also Aero Report 2569.Google Scholar
41.Narasimha, R.et al. Studies on Fluid Injection into Supersonic Streams. Dept of Aeronautics, Indian Institute of Science (Unpublished Report 1966).Google Scholar
42.Kumar, S. and Tietjens, O. G.A Note on the Circulation Function and Induced Efficiency of an Eight-Bladed Propeller. J Indian Inst Sci 37, 1 (1955).Google Scholar
43.Ramachandra, S. M.Direct Calculation of Propeller Deflection. J. Aeronaut Sci 22, 10 (1955).Google Scholar
44.Chaudhuri, S. N. and Nagaraja, K. S.Determination of Distribution of Twist of a Straight Wing to Correspond to the Aerodynamic Load Distribution on a Swept-Back Wing. J. Aeronaut Sci 25, 9 (1958).Google Scholar
45.Chaudhuri, S. N.A Brief Survey of Non-Linear Wing Theories. J. Sci Engng Res III, 2 (1959).Google Scholar
46.Chaudhuri, S. N. and Prasad, V. D. S.A Method for Calculating the Downwash behind Sweptback Wines in Supersonic Flows. J Aeronaut Soc India, 11, 3 (1959).Google Scholar
47.Chaudhuri, S. N.The Calculation of the Velocity Distribution in the Field of a Two-Dimensional Symmetrical Aerofoil with Arbitrary Circulation. Proc Natn Inst Sci India, 27, A, 2 (1961).Google Scholar
48.Kirtan, Singh. Taking Account of the Camber in Thin Aerofoil. J Aeronaut Soc India, 13, 4 (1961).Google Scholar
49.Chaudhuri, S. N.The Aerodynamic Forces on Three- Dimensional Winas Oscillating in Compressible Subsonic Flow with Arbitrary Frequencies. Proc Natn Inst Sci India, 29, A, 4 (1963).Google Scholar
50.Lagerstrom, P. A. and Graham, Martha E. Down- wash and Sidewash Induced by Three-Dimensional Lifting Wings in Supersonic Flow. Douglas Aircraft Report No. SM-13007 (April 1947).Google Scholar
51.Lomax, H.et al. The Calculation of Downwash behind Supersonic Wings with an Application to Triangular Planforms. NACA TR 957 (1950).Google Scholar
52.Robinson, A. and Hunter-Todel, J. H. Bound and Trailing Vortices in the Linearised Theory of Supersonic Flow and the Downwash in the Wake of a Delta Wing. Coll of Aeronautics, Cranfield Report 10, 1957.Google Scholar
53.Mirels, H.et al. Charts for Estimating Downwash behind Rectangular Trapezoidal and Triangular Wings at Supersonic Speeds. NACA TR 2141 (1950).Google Scholar
54.Parthan, S. Pitching Derivatives for Sweptback Wings Oscillating in Compressible Subsonic Flow. Dept of Aeronautics, Indian Inst of Sci, MSc Thesis (1964).Google Scholar
55.Naik, C. S.In-Flight Investigation of Aircraft Vibration Experienced in the Transonic Region. J Aeronaut Soc India, 17, 4 (November 1965).Google Scholar
56.Sankaranarayanan, R.Aerodynamic Influence Coefficient for Finite Wings Oscillating in Supersonic Flow. J Aeronaut Soc India, 16, 1 (January 1964).Google Scholar
57.Parthasarathy, S. P.Self-Preserving Turbulent Axi-Symmetric Wall Jets in a Moving Stream. J Aeronaut Soc India, 16, 3 (August 1964).Google Scholar
58.Parthasarathy, S. P. Two-Dimensional Turbulent Wall Jets With and Without a Constant Outside Stream. Dept of Aeronautics, Indian Institute of Science, MSc Thesis (1964). (Unpublished.)Google Scholar
59.Damania, R. B. Measurements in Wall Jets in a Pressure Gradient. AE Dept Report, Indian Institute of Science (1964). (Unpublished.)Google Scholar
60.Bradshaw, P. and Gee, M. T. Turbulent Wall Jets With and Without an External Stream. ARC R & M No. 3252.Google Scholar
61.Ghatage, V. M.A Design Specification of a Medium to Short-Haul Transport/Freighter Aircraft with STOL Capability. J Aeronaut Soc India, CAARC Symposium Issue Pt II. 17, 2 (May 1965).Google Scholar
62.Ramamritham, S. and Ekbote, M. S. Some Thoughts on Desirable Features for a Civil Transport Aircraft for Operations on Short/Medium Range Routes in India. Ibid.Google Scholar
63.Mahindra, R. Preliminary Design Studies of STOL Type Transport-cum-Freighter Aircraft Suited to the Indian Environment. Ibid.Google Scholar
64.Tirumalesa, D.Experimental Verification of Approximate Transonic Airfoil Theory. J Aeronaut Soc India, 14 (November 1962).Google Scholar
65.Tirumalesa, D.Effect of Shock Wave Boundary Layer Interaction on Airfoil Pressure Distributions at Transonic Speeds. Journal of the Royal Aeronautical Society, London, 67 (October 1963).Google Scholar
66.Subramanian, N. R. and Tirumalesa, D.A Note on the Prediction of the Shock Wave Position on Aerofoils at Transonic Speeds. J. Aeronaut Soc India, 15 (1963).Google Scholar
67.Rao, D. M.Transonic Flow Generation with a Perforated Wall in a Blow-Down Wind Tunnel. J Aeronaut Soc India, 14 (August 1962).Google Scholar
68.Surendriah, M.An Analysis of the Basic Flow Characteristics of Ventilated Wall Nozzles. Indian J Pure Appl Phys 1 (March 1963).Google Scholar
69.Tirumalesa, D. and Satyanarayana, B.Effect of Wall Divergence on Sonic Flows in Solid Wall Tunnels. J R Aero Soc London, 66 (1962).Google Scholar
70.Subramanian, N. R. The Response of Laminar Boundary Layer on a Flat Plate to Small Fluctuations of the Free Stream Velocity. ARC 26 890, FM 3597.Google Scholar
71.Rao, D. M. and Raju, K. N. The Use of Splitters for Flow Control in Wide Angle Conical Diffusers. NAL T NAE 26-64 (December 1964).Google Scholar
72.Ramamritham, S., Gursahaney, H. J. and Gupta, R. R.Analysis of the Magnitudes, Frequencies and Seasonal Variations of Gust Loads Encountered by Transport Aircraft Over Some Trunk Routes in India. J Aeronaut Soc India, 13, 1 (February 1961).Google Scholar
73. Flight Tests of the Kartik Sailplane by Staff and Students of AE Department, Aero Eng Dept Report No. 1, Indian Institute of Technology, Kanpur (May 1965).Google Scholar
74.Joga Rao, C. V. and Rattayya, J. V. Partially Fixed Beams. Curr Sci (January 1953).Google Scholar
75.Kumar, S. and Joga Rao, C. V.Investigation on Stresses Around a Hole in Their Rotating Discs of Hyperbolic and Parabolic Profiles. J Indian Inst Sci (April 1953). 70.Google Scholar
76.Iooa Rao, C. V. and Rattayya, J. V. A Note on Partially Fixed Beam Columns. J Indian Inst Sci (October 1953).Google Scholar
77.Amba Rao, C. L. The Influence of Body Forces on the Stability of a Reinforced Rectangular Plate. Journal of the Royal Aeronautical Society (June 1955).Google Scholar
78.Joga Rao, C. V. and Rattayya, J. V. A Note on Partially Fixed Long Rectangular Plates under Uniformly Distributed Loads. J Indian Inst Sci (April 1954).Google Scholar
79.Joga Rao, C. V. and Lakshmikantam, C. Natural Frequencies of Rectangular Plates with Edges Elastically Restrained against Rotation. J Aero Sci (Nov 1957).Google Scholar
80.Joga Rao, C. V.The Elasto-Plastic Problem of a Thin Rotating Disc with a Central Circular Hole and Hyperbolic Thickness Variation. Proc of the Third Congress on Theo and Appl Mech, Bangalore, India (Dec 1957).Google Scholar
81.Lakshmikantam, C. Bending and Vibration of Elastically Restrained Beams. J Aero Soc India (Feb-March 1958).Google Scholar
82.Lakshmikantam, C. Bending and Vibration of Elastically Restrained Circular Plates. J Franklin Inst (June 1958).Google Scholar
83.Lakshmikantam, C. Bending of Elastically Restrained Plates under Uniform Pressure. Journal of the Royal Aeronautical Society (November 1958).CrossRefGoogle Scholar
84.Srinivas, S., Rao, B. M. and Rao, A. K. Complex End- Fixities in the Flexure of Open Section Beams. Report AE 160S. Dept of Aero Engg. Indian Institute of Science (1966).Google Scholar
85.Joga Rao, C. V.Long Rectangular Plates Subjected to Linearly Varying Loads. Proc of the Second Congress on Theo and Appl Mech, New Delhi, India (Oct 1956).Google Scholar
86.Joga Rao, C. V.Long Rectangular Plates Subjected to Line Loads. Proc of the First Congress on Theo and Appl Mech. Kharagpur, India (November 1955).Google Scholar
87.Bruce, J.Cylindrical Bending of Long Flat Rectangular Plates under Linearly Distributed Pressure. Journal of the Royal Aeronautical Society (January 1965).Google Scholar
88.Josa Rao, C. V. and Pickett, G. Vibration of Plates of Irregular Shapes and Plates with Holes. J Aeronaut Soc India (August 1961).Google Scholar
89.Joga Rao, C. V. and Vijayakumar, . On Admissible Functions for Flexural Vibration and Buckling of Annular Plates. J Aeronaut Soc India (February 1963).Google Scholar
90.Suryanarayana, H. V. Some Problems of Thermal Stresses in Plates. A II Sc Thesis in the Department of Aero Engg, Indian Institute of Science (1958).Google Scholar
91.Rao, A. K.Exact Analysis of St. Venant Torsion and Flexure of Prismatic Bars with Arbitrary Triangular and Polygonal Cross-Sections: I. Torsion of Homogeneous Solid Bards. J Aeronaut Soc India (May 1963).Google Scholar
92.Rao, A. K. Analysis of St. Venant Torsion for Regular Polygonal Cross-Sections. Curr Sci (September 1963).Google Scholar
93.Rao, A. K. and Hussainy, S. A. Exact Analysis of St. Venant Torsion and Flexure of Prismatic Bars with Arbitrary Triangular and Polygonal Cross-Sections: II. Torsion of Encased Homogenous Bars. J Aeronaut Soc India (November 1963).Google Scholar
94.Sampath, S. G. Some Problems in the Flexure of Thin Rectilinear Plates. MSc Thesis in the Department of Aero Engg, Indian Institute of Science (1966). (Also Report AE 112S by Sampath, S. G. and Rao, A. K.)Google Scholar
95.Hussainy, S. A. Analysis of St. Venant Torsion and Analogous Problems with Rectilinear Boundaries. PhD Thesis in the Department of Aero Ensg. Indian Institute of Science (1966). (Also Reports AE 103S, AE 146S-151S by Hussainy, S. A. and Rao, A. K.)Google Scholar
96.Krishna Murthy, A. V. Vibration Studies of Some Basic Aircraft Structural Components. PhD Thesis in the Department of Aeronautical Engineering, Indian Institute of Science (1966). (Also Reports AE 136S, 139S, 155S- 159S by Krishna Murthy, A. V. and Joga Rao, C. V.)Google Scholar
97.Venkataraman, N. S. A Study into the Analysis of Interference Fits and Related Problems. PhD Thesis in the Department of Aeronautical Engineering, Indian Institute of Science (1966). (Also Reports AE 107S-111S and 145S by Venkataraman, N. S. and Rao, A. K.)Google Scholar
98.Rao, A. K. On a Method of Solution for the Harmonic and Biharmonic Type of Equations in Rectilinear Fields. Report AE 114S, Department of Aeronautical Engineering, Indian Institute of Science, 1965.Google Scholar
99.Rao, A. K. and Rajaiah, K. Flexure of Thin Rectilinear Plates: A Problem of Convergence. Report 152S, Dept of Aero Eng, Indian Institute of Science (1966).Google Scholar
100.Vijayakumar, K. Unpublished work on Numerical Experiments in Eigen Value Problems.Google Scholar
101.Vijayakumar, K. and Rao, A. K. Bounds for Poisson's Ratios of Orthotropic Materials. Report AE 153S, Dept of Aero Eng, Indian Institute of Science.Google Scholar
102.Srinivas, S. and Joga Rao, C. V. Some Studies on the Galerkin Vector Method. Report AE 162S, Department of Aeronautical Engineering, Indian Institute of Science.Google Scholar
103.Traill-Nash, R. W. and Collar, A. R. The Effects of Shear Flexibility and Rotatory Inertia on the Bending Vibrations of Beams. Q Jl Mech Appl Math (May 1953).Google Scholar
104.Krishna Murthy, A. V. A Lumped Inertia Force Method in Vibration Problems. Aero Quart (May 1966).Google Scholar
105.Krishna Murthy, A. V. and Joga Rao, C. V. Transverse Vibration of Trusses. J Aeronaut Soc India (May 1966).Google Scholar
106.Govinda Raju, S. P. and Rao, A. K. A Matrix Method for Vibration and Stability Problems. J Aeronaut Soc India, November 1966.Google Scholar
107.Rao, A. K. and Joga Rao, C. V. A Comparison of Lumped Mass, Lumped Inertia and More Direct Matrix Formulations of Vibration Problems. Report AE 161S, Dept of Aero Eng, Indian Institute of Science.Google Scholar
108.Govinda Raju, S. P. Some Applications of the Matrix Force Method. MSc Thesis in the Department of Aeronautical Engineering, Indian Institute of Science. (Also Report AE 138S by Govinda Raju, S. P. and Rao, A. K.)Google Scholar
109.Durvasula, S. Flutter of Simply Supported Isotropic Parallelogrammic Flat Panels in Supersonic Flow. Submitted to the Tenth Congress on Theo and Appl Mech, Madras (December 1965).Google Scholar
110.Durvasula, S. Flutter of Isotropic Clamped Parallelogrammic Flat Panels in Supersonic Flow. Presented at the Eighth British Theoretical Mechanics Colloquium at Southampton, UK (April 1966).Google Scholar
111.Durvasula, S. Flutter of Simply Supported Parallelogrammic Flat Panels in Supersonic Flow. Accepted for presentation at the Fourth Aerospace Sciences Meeting, Los Angles, USA (June 1966).Google Scholar
112.Jessop, H. T., Snell, C. and Holister, G. S. Photoelastic Investigations on Plates with Single Interference Fit Pins with Load Applied to (a) Pin Only and (b) Pin and Plate Simultaneously. Aero Quart (May 1958).Google Scholar
113.Lambert, T. H. and Brailey, R. J. The Influence of Coefficient of Friction on the Elastic Stress Concentration Factor for a Pin-Jointed Connection. Aeronautical Quarterly (February 1962).Google Scholar
114.Rao, A. K. Diffusion of Loads into Swept Panels. Report AE 102S, Department of Aeronautical Engineering, Indian Institute of Science.Google Scholar
115.Rao, A. K. and Dutta Guru, B. Diffusion of Loads into Tapered Panels. Report AE 105S, Department of Aeronautical Engineering, Indian Institute of Science.Google Scholar
116.Rao, A. K.Certain Aspects of Fatigue in Military Aircraft. Proc. of the First Symposium on Flight Sciences and Technology, Directorate of Technical Development and Production (Air), Ministry of Defence, New Delhi, India (January 1961).Google Scholar
117. Folland Aircraft Limited. Unpublished work (1959).Google Scholar
118.Narasimha Murthy, P.An Analytical Investigation of Creep under Combined Loadings. Aircraft Engng (November 1957).Google Scholar
119.Saroja, B. V. The Analysis of Creep in a Thin Rotating Disc with a Central Circular Hole. Aircraft Engng (February 1960).Google Scholar
120.Narasimha Murthy, P. and Iyengar, N. G. R. Creep Behaviour of Nimonic and RR 59 Alloys. Int J Mech Sci. To be published.Google Scholar
121.Narasimha Murthy, P.Theoretical Investigation of Creep and Crack Density Studies in Stress-Coat. Proc of the Soc for Exp Stress Analysis, 15, 1 (1957).Google Scholar
122.Johnson, A. E.Creep under Complex Stress Systems at Elevated Temperatures. Proc Inst. Mech Engrs 164, 4 (1951).Google Scholar
123.Amba Rao, C. L. A New Model Material for Photo-elasticity. Nature, 9 July (1955).Google Scholar
124.Amba Rao, C. L. The Suitability of Araldite D Resin in Photoelastic Investigations. Br J Appl Phys (June 1956).Google Scholar
125.Amba Rao, C. L. Note on Photoelastic Study of Swept Wings. J Aeronaut Soc India (September 1956).Google Scholar
126.Amba Rao, C. L. and Sreevatsa, K.Simplification of Harmonisation of Laplace's Equation by Partial Conformal Transformation. Proc Soc Exp Stress Analysis, 15, 1 (1957).Google Scholar
127.Krishnan, S. and Ramachandra, H. N. Some Aspects of Weight Reduction in Aircraft Structures. J Aeronaut Soc India (November 1965).Google Scholar
128.Sankaranarayanan, R.A Generalized Square Yield Criterion for Shells of Revolution. Proc Indian A cad Sci (March 1964). 102.Google Scholar
129.Sankaranarayanan, R. The Carrying Capacity of a Clamped Spherical Cap under Rotationally Symmetric Loading. Def Sci J (July 1964).Google Scholar
130.Atkinson, R. J. Structural Design. Journal of the Royal Aeronautical Society (November 1963).Google Scholar
131.Sankaranarayanan, R. Yield Surfaces for Non-Homogeneous and Anisotropic Shells of Revolution. (To be published in the Proc Indian Acad Sci.)Google Scholar
132.Sankaranarayanan, R. Dynamic Response of Plastic Circular Cylindrical Shells under Lateral and Hydrostatic Pressures. J Aeronaut Soc India (February 1962).Google Scholar
133.Sankaranarayanan, R. The Effect of Pulse Shape on the Final Deformation of Spherical Shells under Impulsive Loading. AlAA Journal (August 1965).Google Scholar
134.Rajtj, K. N. Bending of Shells of Revolution Stiffened Along the Meridians under Uniformly Distributed Edge Loads. TN AE 62 (October 1962).Google Scholar
135.Murthy, M. V. V. Stresses in a Mitred Pipe Joint under Uniform Internal Pressure. Int J Mech Sci (October 1964).Google Scholar
136.Murthy, M. L. R.et al. Vibration Studies on the NAL Compressor Foundation Structure. TN AE 22-63 (December 1963).Google Scholar
137.Ramamritham, S. and Kumar, S. An Experimental Determination of Axial Load Fatigue Strength of Two Commonly Used Aircraft Specification Aluminium Alloys 24S-T3 and L-72. J Aeronaut Soc India (May 1960).Google Scholar
138.Ramamritham, S. and Kumar, S. Relative Fatigue Strength of Three Aircraft Aluminium Alloys (2 4ST-3, L-72 and L-73) and a Method of Improving Fatigue Life of Joints with Typical Riveted Construction. J Aeronaut Soc India (February 1962).Google Scholar
139.Pandalai, K. A. V. Axially Symmetric Deformation of Circular Cylindrical and Spherical Shells of Non-Linearly Elastic Material. Proc of the First Symposium on Flight Sciences and Technology, Directorate of Technical Development and Production (Air), Ministry of Defence, New Delhi, India (January 1961).Google Scholar
140.Pandalai, K. A. V. and Patel, S. A. Stress Analysis in the Inelastic Range in the Presence of Creep. J Aeronaut Soc India (August 1965).Google Scholar
141.Pandalai, K. A. V. and Patel, S. A. Natural Frequency of Orthotropic Circular Plates. AlAA J (April 1965).Google Scholar
142.Pandalai, K. A. V. and Patel, S. A. Buckling of Orthotropic Circular Plates. Journal of the Royal Aeronautical Society (April 1965).Google Scholar
143.Mossakowski, J.Buckling of Circular Plates with Cylindrical Orthotropy. Archwm Mech Stosow, 5/6, 12, 1960.Google Scholar
144. Members of Compressor and Turbine Research Division, Lewis Flight Propulsion Laboratory, Cleveland, Ohio. Aerodynamic Design of Axial Compressors, 3 vols. NACA RME 56803.Google Scholar
145. Report of INCOSPAR 1965/66, presented by Dr. V. A. Sarabhai to Ninth Plenary Meeting of COSPAR, Vienna, Austria (May 1966).Google Scholar
146.Bose, T. K.et al. Design Charts for Nitrogen Plasma Tube Arc Heaters. NAL TN No. TN-PR-2-66 (1966).Google Scholar