Article contents
Transonic shockwave/turbulent boundary layer interactions on a porous surface
Published online by Cambridge University Press: 04 July 2016
Abstract
Transonic shockwave/turbulent boundary layer interactions on a porous surface above a closed plenum chamber have been studied experimentally in the choked flow of a windtunnel test-section. The equivalent freestream Mach number is 0.76 and results were obtained for three shock strengths. Without the porous surface the Mach numbers ahead of the shock were 1.13, 1.18 and 1.26. The respective shock Mach numbers with the porous surface were 1.10, 1.11 and 1.19. Laser holographic interferometry results are used to measure the density flowfield and examine the nature of the interaction. These results show that the interaction on the porous surface is modified by a thin shear layer adjacent to the surface and the weakening of the Shockwave is attributed to this. The interaction was also studied by solving the two-dimensional Reynolds-averaged Navier-Stokes equations together with the two-layer algebraic eddy-viscosity model of Baldwin-Lomax modified with appropriate corrections for surface transpiration. The computed results show excellent agreement with the experimental data. The examination of these numerical results shows that the surface transpiration occurs at a low subsonic velocity and suggests that the effect of the transpiration through the porous surface on the interaction may be optimised.
- Type
- Research Article
- Information
- Copyright
- Copyright © Royal Aeronautical Society 1993
Footnotes
Department of Mechanical and Aerospace Engineering, North Carolina State University, Raleigh, USA.
References
- 21
- Cited by