Hostname: page-component-586b7cd67f-tf8b9 Total loading time: 0 Render date: 2024-11-27T14:36:36.964Z Has data issue: false hasContentIssue false
  • English
  • Français

Finite element modelling of sandwich panels with graded core under various boundary conditions

Published online by Cambridge University Press:  27 January 2016

M. Kashtalyan  and
B. Woodward
B. Woodward
Affiliation:
Centre for Micro- and Nanomechanics (CEMINACS), School of Engineering, University of Aberdeen, Aberdeen, UK
Get access Rights & Permissions [Opens in a new window]

Abstract

Sandwich panels are widely used in the aerospace industry instead of solid plates due to their high flexural stiffness-to-weight and flexural strength-to-weight ratios. However due to the mismatch of properties between the face sheets and the core, stress concentrations can occur at the face sheet/core interfaces, often leading to delamination. One possible solution to this problem is the introduction of a graded core — a core in which the properties vary gradually from the face sheets to the core centre, eliminating any abrupt changes in properties. In this paper a 3D finite element method, fully validated through comparison with results from the literature and a 3D elasticity solution, is applied to modelling of sandwich panels with graded core. The approach makes use of graded elements to study the effect of varying the boundary conditions on the elastic deformation of the panel subject to uniformly distributed loading. Comparative analysis of stress and displacement fields in sandwich panels with homogeneous and graded cores is carried out under various combinations of simply supported, clamped and free edges.

Type
Research Article
Information
The Aeronautical Journal , Volume 116 , Issue 1186 , December 2012 , pp. 1289 - 1314
Copyright
Copyright © Royal Aeronautical Society 2012 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Besant, T., Davies, G.A.O. and Hitchings, D. Finite element modelling of low velocity impact of composite panels, Composites Part A: Applied Science and Manufacturing, 2001, 32, pp 1189–1196.Google Scholar
2. Davies, G.A.O., Hitchings, D., Besant, T., Clarke, A. and Morgan, C. Compression after impact strength of composite sandwich panels, Composite Structures, 2004, 63, (1), pp 1–9, 1999, 22, (4): pp 477–512.Google Scholar
3. Anderson, T.A. A 3D elasticity solution for a sandwich composite with functionally graded core subjected to transverse loading by a rigid sphere, Composite Structures, 2003, 60, (3), pp 265–74.Google Scholar
4. Kashtalyan, M. and Menshykova, M. Three-dimensional elasticity solution for sandwich panels with a functionally graded core, Composite Structures, 2009, 87, (1), pp 36–43.Google Scholar
5. Woodward, B. and Kashtalyan, M. Bending response of sandwich panels with graded core: 3D elasticity analysis, Mechanics of Advanced Materials and Structures, 2010, 17, (8), pp 586–594.Google Scholar
6. Woodward, B. and Kashtalyan, M. 3D elasticity analysis of sandwich panels with graded core under distributed and concentrated loadings, Int J Mechanical Sciences, 2011, 53, (10), pp 872–885.Google Scholar
7. Apetre, N.A., Sankar, B.V. and Ambur, D.R. Analytical modeling of sandwich beams with functionally graded core, J Sandwich Structures and Materials, 2008, 10, (1), pp 53–74.Google Scholar
8. Bian, Z.G., Chen, W.Q., Lim, C.W. and Zhang, N. Analytical solutions for single- and multi-span functionally graded plates in cylindrical bending, Int J Solids and Structures, 2005, 42, (24-25), pp 6433–56.Google Scholar
9. Zhong, Z. and Yu, T. Analytical solution of a cantilever functionally graded beam, Composites Science and Technology, 2007, 67, (3-4), pp 481–8.Google Scholar
10. Xu, Y. and Zhou, D. Three-dimensional elasticity solution of functionally graded rectangular plates with variable thickness, Composite Structures, 2009, 91, (1), pp 56–65.Google Scholar
11. Xu, Y., Zhou, D. and Cheung, Y.K. Elasticity solution of clamped-simply supported beams with variable thickness, Applied Mathematics and Mechanics (English Edition), 2008, 29, (3), pp 279–90.Google Scholar
12. Huang, Z.Y., Lü, C.F. and Chen, W.Q. Benchmark solutions for functionally graded thick plates resting on Winkler-Pasternak elastic foundations, Composite Structures, 2008, 85, (2), pp 95–104.Google Scholar
13. Sburlati, R. and Bardella, L. Three-dimensional elastic solutions for functionally graded circular plates, European J Mechanics — A/Solids, 2011, 30, (3), pp 219–35.Google Scholar
14. Kim, J. and Paulino, G.H. Isoparametric graded finite elements for nonhomogeneous isotropic and orthotropic materials, Transactions ASME J Applied Mechanics, 2002, 69, (4), pp 502–14.Google Scholar
15. Buttlar, W.G., Paulino, G.H. and Song, S.H. Application of graded finite elements for asphalt pavements, J Engineering Mechanics, 2006, 132, (3), pp 240–8.Google Scholar
16. Santare, M.H. and Lambros, J. Use of graded finite elements to model the behaviour of nonhomogeneous materials, J Applied Mechanics, 2000, 67, pp 819–22.Google Scholar
17. Li, C. and Zou, Z. Multiple isoparametric finite element method for nonhomogeneous media, Mechanics Research Communications, 2000, 27, (2), pp 137–42.Google Scholar
18. Astley, R.J. Finite Elements in Solids and Structures, an Introduction, 1992, Chapman and Hall, London.Google Scholar
19. Zienkiewicz, O.C. and Taylor, R.L. The Finite Element Method, 1990, McGraw-Hill, London.Google Scholar
20. Dassault Systèmes. ABAQUS Version 6.8 Documentation, 2008.Google Scholar
21. Woodward, B. and Kashtalyan, M. Performance of functionally graded plates under localised transverse loadings, Composite Structures, 2012, 94, (7), pp 2254–2262.Google Scholar
22. Kashtalyan, M. Three-dimensional elasticity solution for bending of functionally graded rectangular plates, European J Mechanics A/Solids, 2004, 23, (5), pp 853–864.Google Scholar
23. Reddy, J.N. Theory and Analysis of Elastic Plates and Shells, Second edition, 2007, CRC Press, Boca Raton.Google Scholar