Hostname: page-component-586b7cd67f-2brh9 Total loading time: 0 Render date: 2024-11-27T22:01:24.205Z Has data issue: false hasContentIssue false
  • English
  • Français

Enhanced vortex stability in trapped vortex combustor

Published online by Cambridge University Press:  03 February 2016

S. Vengadesan  and
C. Sony
S. Vengadesan
Affiliation:
[email protected], Department of Applied Mechanics, Indian Institute of Technology of Madras, Chennai, India
Get access Rights & Permissions [Opens in a new window]

Abstract

The Trapped Vortex Combustor (TVC) is a new design concept in which cavities are designed to trap a vortex flow structure established through the use of driver air jets located along the cavity walls. TVC offers many advantages when compared to conventional swirl-stabilised combustors. In the present work, numerical investigation of cold flow (non-reacting) through the two-cavity trapped vortex combustor is performed. The numerical simulation involves passive flow through the two-cavity TVC to obtain an optimum cavity size to trap stable vortices inside the second cavity and to observe the characteristics of the two cavity TVC. From the flow attributes, it is inferred that vortex stability is achieved by circulation and the vortex is trapped inside when a second afterbody is added.

Type
Technical note
Information
The Aeronautical Journal , Volume 114 , Issue 1155 , May 2010 , pp. 333 - 337
Copyright
Copyright © Royal Aeronautical Society 2010 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Hsu, K.Y., Goss, L.P. and Roquemore, W.M., Characteristics of a trapped-vortex combustor, J of Propulsion and Power, 1998, 14, (1), pp 57–65.Google Scholar
2. Little, B.H. Jr., and Whipkey, R.R., Locked-vortex afterbodies, J Aircr, 1979, 16, pp 296–302.Google Scholar
3. Nandakumar, V. and Vengadesan, S., Reactive flow analysis of trapped vortex combustor using two equation turbulence models, 2008, Master Thesis, Department of Applied Mechanics, IIT Madras, India.Google Scholar
4. Selvaganesh, P. and Vengadesan, S., Cold flow analysis of trapped vortex combustor using two equation turbulence models. Aeronaut J, 2008, 112, (1136), pp 569–580.Google Scholar
5. Viswanath, P.R., Flow management techniques for base and afterbody drag reduction, Prog Aerospace Sci, 1996, 32, pp 79–129.Google Scholar