Hostname: page-component-cd9895bd7-gvvz8 Total loading time: 0 Render date: 2024-12-26T15:54:46.909Z Has data issue: false hasContentIssue false
  • English
  • Français

Design of an advanced nacelle for a very high bypass ratio engine

Published online by Cambridge University Press:  04 July 2016

J.-L. Lecordix ,
J.-M. Gippet  and
J.-L. Duparcq
J.-L. Lecordix
Affiliation:
Snecma
J.-M. Gippet
Affiliation:
Snecma
J.-L. Duparcq
Affiliation:
Snecma
Get access Rights & Permissions [Opens in a new window]

Abstract

The next challenge for future engines is to increase the bypass ratio in order to improve the propulsive efficiency. These very high bypass ratio engines improve the fuel consumption but create new technical challenges. These challenges include the fact that larger engines require bigger nacelles, hence the external drag and weight increase; furthermore the installation of these engines on civil aircraft is more challenging. Therefore important work has been carried out to optimise the design of these new nacelles and their installation on the airframe.

The present work is based on a new engine, with a very high bypass ratio. For this engine Snecma has designed an advanced nacelle with a low diameter-low length fan cowl and a core cowl mounted thrust reverser. A very short secondary flow nozzle is required to improve accessibility to the core engine and its accessories. The fan cowl length is dramatically reduced.

Different solutions were investigated to design the inlet and the fan cowl. Based on 2D potential inverse codes and 3D Euler codes, CFD calculations were made to optimise the aerodynamic lines for cruise conditions while keeping good off-design performance. A highly challenging exhaust nozzle was designed to maintain good efficiency with very tough geometric constraints. For this Snecma used 2D Navier-Stokes CFD codes. New reverse systems were studied for this type of nacelle, for example core cowl mounted thrust reversers. The optimisation of these highly 3D geometries was performed using 2D and 3D Navier-Stokes calculations.

Type
Research Article
Information
The Aeronautical Journal , Volume 96 , Issue 960: European Edition , December 1992 , pp. 387 - 394
Copyright
Copyright © Royal Aeronautical Society 1992 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Zimbrick, R.A. and Colehour, J.L. Investigation of very high bypass ratio engines for subsonic transports, AIAA-88-2953.Google Scholar
2. Borradaille, J.A. Towards the optimum ducted UHBR engine, AIAA-88-2954.Google Scholar
3. Lecordix, J.L., Fratello, J.G. and Gippet, J.M. Simulation numerique de l’ecoulement aerodynamique autour des nacelles, N14, presented at the 69th Fluid Dynamics Panel meeting and symposium, AGARD, October 1991.Google Scholar
4. Schreiber, L. and Legras, M. Navier-Stokes computation on a pivoting doors thrust reverser and comparison with tests, ASME-92-GT-254.Google Scholar