Hostname: page-component-cd9895bd7-p9bg8 Total loading time: 0 Render date: 2024-12-25T06:52:39.442Z Has data issue: false hasContentIssue false
  • English
  • Français

Crack growth characteristics of integrally machined stringer–skin panels

Published online by Cambridge University Press:  04 July 2016

J. B. Young  and
M. Ashfaq Sheikh
J. B. Young
Affiliation:
Department of Aerospace Technology College of Aeronautics, Cranfield University, Cranfield, UK
M. Ashfaq Sheikh
Affiliation:
Department of Aerospace Technology College of Aeronautics, Cranfield University, Cranfield, UK
Get access Rights & Permissions [Opens in a new window]

Summary

The variation of the stress intensity factor (SIF) for cracks growing in integrally machined stiffened skin panels have been studied in an isotropic material. The stringer-skin panel has been modelled using the Nastran finite element system with allowance for crack tip singularity by use of crack tip elements. To allow for variations in stringer and skin geometry, three stiffness ratios (stringer stiffness-skin stiffness) were investigated.

The stress intensity factors have been converted into nondimensionalised values of stress intensity factor coefficients (K1/K0). A damage tolerant and residual strength analysis has been carried out using an in-house computer program. Results indicate very little difference for the different stiffness ratios examined.

Type
Research Article
Information
The Aeronautical Journal , Volume 99 , Issue 982 , February 1995 , pp. 63 - 68
Copyright
Copyright © Royal Aeronautical Society 1995 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.DES 8614 Computer program on Crack Growth Life and Residual Strength Calculation. FRACT Manual, Dept of Aerospace Technology, CofA, Cranfield University.Google Scholar
2. Poe, C.C. Jr Fatigue crack propagation in stiffened panels. Damagetolerance in aircraft structures ASTM 486, 1971.Google Scholar
3. Niu, M.C.Y. Airframe Structural Design Commilit Press Hong Kong, 1988.Google Scholar
4. Promonos, A. Preliminary damage tolerance analysis on typical lower wing skin panels of turboprop aircraft, MSc Thesis CIT, 1992.Google Scholar
5. Rooke, D.P. and Cartwright, D.J. Compendium of Stress Intensity Factors, Her Majesty's Stationary Office, 1976.Google Scholar
6. Sih, G.C. (Ed) Methods of Analysis and Solutions of Crack Problems, Noordhoff. 1973.Google Scholar
7.ESDU 80036 Use of Linear Elastic Fracture Mechanics in Estimating Fatigue Crack Growth Rates and Residual Strength Component. ESDU International, 1991.Google Scholar