No CrossRef data available.
Article contents
Approach Criteria
Published online by Cambridge University Press: 04 July 2016
Extract
Certain criteria are desirable to measure the adequacy of handling qualities, performance, guidance, and perhaps wholly external things like noise, associated with an aircraft on its final approach. These criteria should be quantitative so as to enable the designer and operator to predict or lay down suitable limits to the operation, to compare one aircraft with another, and to make good use of operating experience.
- Type
- Take-Off and Landing Problems
- Information
- Copyright
- Copyright © Royal Aeronautical Society 1963
References
1.Perry, D. H. Flight Simulators and the Study of Aircraft Handling Characteristics. Unpublished RAE Paper (Presented subsequently at 15th I ATA Technical Conference— Conf. 15/WP-71).Google Scholar
2.Kirchner, Otto E. Critical Factors in Approach and Landing Accidents. Part I. Flight Safety Foundation, 31st December 1960.Google Scholar
3.Davenport, A. V. The Spectrum of Gustiness Near the Ground at High Wind Speeds. Journal of the Royal Meteorological Society, 1960.Google Scholar
4. Langley Airworthiness Branch. Operational Experience of Turbine Powered Commercial Transport Airplanes. NASA TN D-1392, October 1962.Google Scholar
5.Pinsker, W. I. G. Features of Large Transport Aircraft Affecting Control During Approach and Landing. Unpublished RAE Paper (Presented subsequently at 15th I ATA Technical Conference—Conf. 15/WP/71).Google Scholar
6.Lean, D. and Eaton, R. The Influence of Drag Characteristics on the Choice of Landing Approach Speeds. RAE Technical Note Aero 2503, April 1957.Google Scholar
7.Cook, J. E. A Study of the Behaviour of Aircraft on Final Approach to Landing at London Airport. Ministry of Aviation ATCEU Report No. 103, August 1960.Google Scholar