Self-diffusion coefficients of H2O molecules in water-rich gels of Na-rich expandable mica synthesized using natural talc were measured by pulsed-gradient spin-echo 1H nuclear magnetic resonance (NMR), and the dependence on mica fraction (0.00–43.8 wt.%) and temperature (30.0–60.9°C) was examined. On the basis of the NMR results, the self-diffusion coefficient of H2O, Dwater, in the gel can be expressed by ln(Dwater/D0water) = 1.64[exp( −0.0588w) - 1], where D0water is the self-diffusivity of bulk water at temperature and w is the weight fraction of the mica (wt.%). The activation energy of H2O diffusivity in mica gel is nearly equal to that in bulk water. These findings indicate that the normalized diffusivity, Dwater/D0water, is independent of temperature. The diffusivity of I−, Diodine, in the gels was examined by X-ray computed tomography (CT) at 22°C, and the influence of the mica fraction (0.00–24.8 wt.%) was studied to determine the contribution of bound H2O. The X-ray CT results show that the normalized I− diffusivity, Diodine/D0iodine, obeys the above-mentioned phenomenological curve where D0iodine is the I− diffusivity in bulk water. I− is non-sorbing, and thus its diffusion is restricted only by the geometrical complexity of the pore structure of gels. Therefore, the effect of bound H2O molecules on average H2O diffusivity is negligible for w <24.8 wt.%. Diffusivity is governed by free or unbound H2O molecules diffusing in the geometrically complex and tortuous pore structure of mica-mineral grains. This is a result of the large population of unbound H2O far from the grain surface compared to the small population of bound H2O near the grain surface. The diffusion of I− ions in montmorillonite gels was examined by X-ray CT for w <16.7 wt.% montmorillonite. The normalized iodine diffusivity, (Diodine/D0iodine) obtained is in reasonably close agreement with the literature data for the normalized diffusivity of H2O and is similar to the master curve of expandable mica. Therefore, bound H2O molecules near negatively charged clay surfaces do not play a major role in the H2O diffusivity for water-rich montmorillonite gels.

A perfluorinated ionic liquid, 1-(perfluorohexyl)-3-methylimidazolium iodide, was synthesized via microwave reaction and compared to a non-fluorinated analog. Typically, the synthesis of fluorinated ionic liquids involves long reaction times and multiple steps. We have demonstrated a shortened synthesis and a more straightforward procedure, by using a microwave reactor for the microwave-assisted synthesis of 1-(perfluorohexyl)-3-methylimidazolium iodide. The addition of fluorinated alkyl chains on imidazolium ionic liquid cations increases the molecular free volume of the ionic liquid which is beneficial for increasing CO2 physisorption. Computational and experimental data shows an increased CO2 solubility and capacity for fluorinated ionic liquids. The perfluoroalkyl functionalized ionic liquid is characterized using 1H and 19F NMR spectroscopy, FTIR spectroscopy, and DSC. By DSC, a crystallization onset is near -31 °C and while the onset of the melting point between -30 and -17 °C.

Nuclear wastes generated from reprocessing of used nuclear fuel tend to contain a large fraction of rare earth (RE, e.g., Nd3+), transition (TM, e.g., Mo6+, Zr4+), alkali (A, e.g., Cs+), and alkaline earth cations (AE, e.g., Ba2+, Sr2+). Various strategies have been considered for immobilizing such waste streams, varying from nominally crystal-free glass to glass-ceramic to multi-phase ceramic waste forms. For glass and glass-ceramic waste forms, the added glass-forming system is generally alkali-alkaline earth-aluminoborosilicate (i.e., Na-Ca-Al-B-Si oxide). In a US-UK collaborative project, summarized here, we investigated the glass structure and crystallization dependence on compositional changes in simulated nuclear waste glasses and glass-ceramics. Compositions ranged in complexity from five – to – eight oxides. Specifically, the roles of Mo and rare earths are investigated, since a proposed glass-ceramic waste form contains crystalline phases such as powellite [(AE,A,RE)MoO4] and oxyapatite [(RE,AE,A)10Si6O26], and the precipitation of molybdenum phases is known to be affected by the rare earth concentration in the glass. Additionally, the effects of other chemical additions have been systematically investigated, including Zr, Ru, P, and Ti. A series of studies were also undertaken to ascertain the effect of the RE size on glass structure and on partitioning to crystal phases, investigating similarities and differences in glasses containing single RE oxides of Sc, Y, La, Ce, Nd, Sm, Er, Yb, or Lu. Finally, the effect of charge compensation was investigated by considering not only the commonly assessed peralkaline glass but also metaluminous and peraluminous compositions. Glass structure and crystallization studies were conducted by spectroscopic methods (i.e., Raman, X-ray absorption, nuclear magnetic resonance (NMR), optical absorption, photoluminescence, photoluminescence excitation, X-ray photoelectron spectroscopy), microscopy (i.e., scanning electron microscopy, transmission electron microscopy, electron probe microanalysis), scattering (i.e., X-ray and neutron diffraction, small angle measurements), and physical characterization (i.e., differential thermal analysis, liquidus, viscosity, density). This paper will give an overview of the research program and some example unpublished results on glass-ceramic crystallization kinetics, microstructure, and Raman spectra, as well as some examples of the effects of rare earths on the absorption, luminescence, and NMR spectra of starting glasses. The formal collaboration described here has resulted in the generation of a large number of results, some of which are still in the process of being published as separate studies.

Though not often discussed explicitly in literature, sample handling and preparation for advanced characterization techniques is a significant challenge for radiological materials. In this contribution, a detailed description is given of method development associated with characterization of highly radioactive and, in some cases, hygroscopic oxides of technetium. Details are given on developed protocols, fixtures, and tooling designed for x-ray and neutron diffraction, x-ray absorption, Raman spectroscopy, magic angle spinning nuclear magnetic resonance, and electron paramagnetic resonance. In some cases, multiple iterations of improved sample holder design are described. Lessons learned in handling Tc compounds for these and similar characterization methods are discussed.

Glass-ceramics have gained considerable importance for applications in high-energy technology. Li- and Na-superionic ion-conducting ceramics find widespread use in lithium- and sodium-ion batteries as separators, solid electrolytes, and cathode materials. The ionic conductivity of these materials is influenced by crystal chemical parameters and can be further optimized via microstructural control using glass-ceramic processing. This article summarizes the most promising glass-ceramic material systems currently in use, detailing recent progress in understanding their structure–property–performance relationships. We also highlight the power and potential of solid-state nuclear magnetic resonance techniques for providing quantitative knowledge about structure, phase composition, and ion dynamics in these materials.

To achieve the goal of biocompatibility in nano-based materials we must first obtain a fundamental understanding of the physical and chemical behavior of biomolecules at the interfaces of nanomaterials. A first step towards understanding protein interactions with nanomaterials is to understand how individual amino acids interact at the interfaces. In this paper, we investigated the lysine adsorption behavior on fumed silica nanoparticles by solid-state NMR spectroscopy. We use 1H, 13C and 15N solid-state magic angle spinning (MAS) NMR techniques to elucidate how lysine is adsorbed on silica nanoparticles surfaces via strong hydrogen-bonding interaction between the protonated side-chain amine group and silanol group on silica nanoparticles surfaces.*

The Gran Pirámide, a Mexican cultural heritage site, is located at the archaeological site of Cholula, Puebla, Mexico. At the base of its platform this pyramid is the largest in the world. It was built in layers from 800 to 1100 AD by the Cholultecan pre-Hispanic culture. The archaeological site is famous by its great mural paintings that have been well-studied. The pyramid was built with earthen construction, a system of multiple bulding episodes with layers of adobe. The building material, adobe, has not been well studied. Due to its fragile condition, a more extensive study was conducted to understand the behavior of the building and the mural paintings substrate, in order to propose conservation strategies.

Geological context of the area was the starting point to propose the relevant materials used in its construction. That was a fundamental key for the interpretation of the experimental techniques used that include X-ray Diffraction (XRD), Particle-Induced X-ray Emission (PIXE), 29Si and 27Al Nuclear-Magnetic Resonance with Magic-Angle Spin (NMR-MAS), Thermal Analysis, Optical and Scanning Electron Microscopy (SEM) and colorimetric measurements.

The results obtained from the original adobes have been compared with fresh soils from horizons related with pre-Hispanic activity. The results indicate presence of amorphous materials and neo-mineral formation besides feldspars and opal. The amorphous phases have been identified by NMR-MAS and SEM.

Differences were found in the composition from the adobe used for the joints, mainly in the clay fraction, that can be distinguished by color and that guided to group the information acquired.

These results provide new information on the composition and microstructure of adobes from the Gran Pirámide of Cholula. Further studies will involve soil physics methods and erosion tests to complete the task of having a comprehensive knowledge of the earth architecture of the pyramid.

A potential alternative to achieve smart materials for biomedical applications is the combination of natural and synthetic polymers. In order to understand the structure and properties of two γ-radiation grafted biopolymers, chitosan-g-poly(N-isopropylacrylamide) (CS/PNIPAAm) and cotton-g-2-(dimethylamino) ethyl methacrylate (CG-DMAEMA) were analyzed by solid state nuclear magnetic resonance (SSNMR) 13C-CPMAS at different contact times (tCP). The use of different tCP in this grafted biopolymers showed that chemical shifting, broadening, size and symmetry of the some signals, gives important information for structure elucidation and molecular mobility. SSNMR spectra indicate changes in the local order structure, CG suffered less modifications when it is grafted than CS. CG-g-DMAEMA spectrum is very similar to CG spectrum, in contrast with spectrum of CS-g-NIPAAm, is very different than CS. Spectra of swelling polymers in water showed more structural information about secondary structure.

High temperature solid state sodium (23Na) magic angle spinning (MAS) NMR spin lattice relaxation times (T1) were evaluated for a series of NASICON (Na3Zr2PSi2O12) materials to directly determine Na jump rates. Simulations of the T1 temperature variations that incorporated distributions in Na jump activation energies, or distribution of jump rates, improved the agreement with experiment. The 23Na NMR T1 relaxation results revealed that distributions in the Na dynamics were present for all of the NASICON materials investigated here. The 23Na relaxation experiments also showed that small differences in material composition and/or changes in the processing conditions impacted the distributions in the Na dynamics. The extent of the distribution was related to the presence of a disordered or glassy phosphate phase present in these different sol-gel processed materials. The 23Na NMR T1 relaxation experiments are a powerful tool to directly probing Na jump dynamics and provide additional molecular level details that could impact transport phenomena.

The study of water’s functional role on hydrophilic surfaces of biological and soft materials benefits from experimental measurements that operate at finer length and time scales than contact-angle-measurement-derived surface wettability. We show that local translational diffusivity permits the empirical determination of local hydrophilicity by means of Overhauser dynamic nuclear polarization (ODNP) amplified 1H NMR relaxometry. Large unilamellar vesicles (LUVs) in dilute bulk water solution serve as good model hydrophilic surfaces, and their surface water diffusion was shown to be partially or entirely decoupled from the bulk water viscosity, with the extent of decoupling dependent on the surface activity of the particular viscogen chosen. The effective hydrophilicity of a hydrated LUV surface in solution was further shown to be tunable by specific ions or osmolytes dissolved in solution, and the chemical makeup of a surface can give rise to a heterogeneous hydration dynamics landscape, as demonstrated on protein surfaces. ODNP-derived surface water diffusivity is suggested to be a unique tool for the site-specific mapping of the interaction landscape of a wide range of functional materials operating in aqueous solution, from wet adhesives to fuel cell membranes.

Soap formation in traditional oil paintings occurs when heavy-metal-containing pigments, such as lead white, 2Pb(CO3)2·Pb(OH)2, and lead-tin yellow type I, Pb2SnO4, react with fatty acids in the binding medium. These soaps may form aggregates that can be 100-200 μm in diameter, which swell and protrude through the paint surface, resulting in the degradation of the paint film and damage to the integrity of the artwork. In addition, soap formation has been reported to play a role in the increased transparency of paint films that allows the painting support, the preparatory drawing, and the artists’ alterations to become visible to the naked eye. The factors that trigger soap formation and the mechanism(s) of the process are not yet well understood. To elucidate these issues, chemical and structural information is necessary which can be obtained by solid-state 207Pb, 119Sn, and 13C nuclear magnetic resonance (NMR). In the present study, a combination of 207Pb NMR pulse sequences was used to determine accurately the NMR parameters of lead-containing pigments and lead carboxylates known to be involved in soap formation, such as lead palmitate, lead stearate, and lead azelate. These results show that the local coordination environment of lead azelate is different from lead palmitate or lead stearate and therefore it is unlikely that lead azelate would be incorporated into an ordered structure containing lead palmitate and lead stearate. In addition, the chemical shifts of the pigments obtained are different from those of the soaps, demonstrating that 207Pb NMR is useful in characterizing the components when present in a mixture, such as a paint film. The NMR methods discussed can also be applied to other Pb-containing cultural heritage materials, electronic and optoelectronic materials, superconducting materials, and environmentally contaminated materials.

It is biologically and clinically important to understand and explain the functional properties of cartilage, such as its load bearing and lubricating ability, in terms of the structure, organization, components and their interactions. Our approach tries to explain functional material properties of these tissues as arising from polymeric interactions between and among the different molecular constituents within the tissues at different hierarchical lengthscales. We treat the tissue effectively as a complex molecular composite containing highly charged polysaccharide microgels trapped within a fine collagen meshwork. We have been developing a multi-scale experimental and theoretical framework to explain key material properties of cartilage by studying those of its constituents and the interactions among them at a variety of length and time scales. We use this approach to address important biological questions. One novel application we highlight here is the use of non-invasive magnetic resonance imaging (MRI) methods to characterize different components and compartments within cartilage and the different water environments associated with each one, in an attempt to provide a comprehensive picture of the mechanical/chemical state of cartilage.

Highly active metallocenes and other single site catalysts as well as Grubbs and Schrock metathesis catalytic systems have opened up the possibility to polymerize cycloolefins or to copolymerize them with ethene or propene. The polymers obtained show exciting structures and properties. Cycloolefins such as cyclopentene, cyclooctene, norbornene, and their substituted derivatives are incorporated into the polymer chain either by double bonds or by ring-opening metathesis polymerization. Materials with elastomeric properties or tactic polymers with high glass transition temperatures and melting points are obtained with a wide range of microstructures. For example, cycloolefin copolymers and other homo- and copolymers of norbornene are of great academic and industrial interest because of their properties and applications in optoelectronics, lenses, and coatings.

Bentonite is planned to be used in many countries as an important barrier in high-level waste repositories. Assessment of the barrier with regard to, inter alia, its ability to hinder transport of dissolved radionuclides leaking from a damaged canister containing spent nuclear fuel, requires quantitative data about the pore structure inside bentonite. The present NMR study was made in order to determine the number of distinguishable porewater phases in compacted water-saturated samples of MX-80 bentonite and Na-montmorillonite. The samples were compacted to dry densities in the interval 0.7-1.6 g/cm3 and subsequently saturated with Milli-Q water or 0.1 M NaCl solution in equilibrium cells. The NMR measurements were performed with a high-field 270 MHz NMR spectrometer using a short inter-pulse CPMG method to study proton T1ρ relaxation. The measured relaxation curves were found to consist of one faster and one slower proton relaxation. Subsequent analysis of the data indicated that the faster relaxation was associated with interlayer (IL) water between montmorillonite unit layers, while the slower one was associated with non-interlayer (non-IL) water located outside the interlayer spaces. The results indicate for compacted samples with a dry density of ≥ 1.0 g/cm3, that Na montmorillonite contains a larger relative volume of non-IL water than the corresponding MX-80 bentonite. This in turn, suggests that the stacking number in Na-montmorillonite is smaller than in MX-80 bentonite. Changing the porewater chemistry seemed to have some effect on the non-IL water content in the Na montmorillonite but not in the MX-80 bentonite.

This work covers the design of stimuli-responsive membranes and their ever-expanding range of use. Stimuli-responsive membranes that change their physicochemical properties in response to changes in their environment were synthesized for biomedical application. Responsive cotton-g-[2-(dimethylamino) ethyl methacrylate] membranes were obtained using γ-rays by mutual irradiation (direct method). The effect of absorbed dose, dose rate, and monomer concentration on the grafting yield was determined. The grafted samples were verified by the FTIR-ATR, 1H and 13C HRMAS NMR and 13C CPMAS NMR spectroscopies; thermal properties were analyzed by TGA and DSC and the stimuli-responsive behavior was studied by DSC.

Position-dependent force-detected NMR measurements on a 25x15x7 μm3 single crystal of ammonium sulfate (NH4)2SO4 were performed at room temperature in a sample-on-oscillator configuration. Force signals were detected with 12 μm resolution in a one-dimensional scan. Measurements of NMR relaxation times T2* = 1.5 ± 0.3 μs, T2 = 44 ± 2 μs, and T1 = 5.6 ± 0.7 s were obtained in an 8-T magnetic field, revealing an unexpected frequency-dependent fluctuation spectrum at room temperature.

Solid electrolyte materials have the potential to improve performance and safety characteristics of lithium-ion batteries by replacing conventional solvent-based electrolytes. A candidate solid polymer electrolyte, AMLi/PEGDM, has been synthesized by crosslinking an anionic monomer AMLi, with poly(ethylene glycol) dimethacrylate. The main goal of the synthesis is to produce a single-ion conducting polymer network where lithium cations can move freely and fluorinated anions are immobilized as part of the polymer network. A comprehensive characterization of anion and cation mobility in the resulting material is therefore required. Using pulsed-field gradient nuclear magnetic resonance (PFG-NMR), we are able to measure and quantify the individual diffusion coefficients of mobile species in the material (19F and 7Li) and confirm the extent to which the fluorinated anionic component is immobilized. We have characterized dry (σ~3.0 x10-7 S/cm at 30°C) and propylene carbonate (PC) saturated gel (σ~1.0x10-4 S/cm at 30°C) samples. Experimental results include NMR spin-spin and spin-lattice relaxation times in addition to diffusion coefficient measurements over a temperature range up to 100°C. Practically, the diffusion measurements are extremely challenging, as the spin-spin (T2) relaxation times are very short, necessitating the development of specialized pulsed-field gradient apparatus. Diffusion coefficients for the most mobile components of the lithium cations and fluorinated anions at 100°C in dry membranes have been found to be 3.4 x10-8 cm2/s and 2.1 x10-8 cm2/s respectively. These results provide valuable insight into the conduction mechanisms in these materials, and will drive further optimization of solid polymer electrolytes.

The generation of terminal N-Hydroxyl substituents in p-phenylene ethynylene based compounds is presented. P-phenylene ethynylene derivatives were synthesized in a Sonogashira coupling reaction. N-Hydroxyl groups could be introduced by lithiation of iodine moieties and subsequent reaction with the 2-methyl-2-nitrosopropane generated by the cleavage of its dimer. The synthesis by lithiation was found to be more effective compared to the reaction with the Grignard reagent and the chloro-derivative. The resulting compounds were characterized by 1H NMR, UV and PL spectroscopy and were shown to be sensitive towards oxidation. This new approach of introducing additional charge carriers by nitroxyl endgroups might enable conjugated polymers with enhanced conductivity.

The dependence of Li mobility on structure and composition of quenched Li0.5-xNax La0.5TiO3 (0 ≤ x < 0.5) and slowly cooled Li0.2-xNaxLa0.6TiO3 (0 ≤ x < 0.2) perovskite series, has been investigated by means of Neutron Diffraction (ND), Nuclear Magnetic Resonance (NMR) and Impedance Spectroscopy (IS). The first series displays rhombohedral (√2ap, √2ap, 2√3ap; S.G. R-3c) symmetry and vacancies are randomly distributed on A-sites (disordered phases), while Li0.2-xNaxLa0.6TiO3 series, presents orthorhombic unit cells (2ap, 2ap, 2ap; S.G. Cmmm) and the vacancies are preferentially located in alternating layers along the c-axis (ordered phases). In both cases, Li ions are shifted from A sites to a fourfold coordination at unit cell faces of the single cubic perovskite and octahedral are tilted along the rombohedral axis in Li-rich and along b-axis in Li- poor series. By heating the elimination of the octahedral tilting takes place changing the symmetry from rhombohedral to cubic in Li-rich samples, and from orthorhombic to tetragonal in Li-poor samples; however no changes were detected in La-vacancy distributions. For a particular value of sodium content (x=0.3 for Li0.5-xNaxLa0.5TiO3 and x=0.17 for Li0.2-xNaxLa0.6TiO3), the conductivity drops several orders of magnitude indicating that the amount of vacancies approaches the percolation threshold. In the temperature range 77-500 K, conductivity of Na-doped samples displays departures from the Arrhenius behavior, decreasing activation energy from 0.37 to 0.25 eV in disordered samples and from 0.37 to 0.12 eV in ordered ones. The structural sites occupancy has been investigated by ND, while Li mobility was evaluated through NMR and Impedance spectroscopy. The temperature dependence of thermal BLi factors has been related to the increment of conductivity that precede structural transformations, suggesting that Li motion trigger detected transitions in both series.

Lithium mobility in LiM2(PO4)3 compounds, with M= Ge, Ti, Sn, Zr and Hf, has been investigated by 7Li Nuclear Magnetic Resonance (NMR) spectroscopy in the temperature range 100-500 K. From the analysis of 7Li NMR quadrupole interactions (CQ and η parameters), Li sites occupancy and exchange processes between structural sites have been studied. Below 250K, Li ions are preferentially located at M1 sites in rhombohedral phases, but occupy M12 sites in triclinic ones. At increasing temperatures, Li mobility has been deduced from spin-spin () and spin-lattice relaxation () rates. In this analysis, the presence of two relaxation mechanisms in plots has been associated with departures of conductivity from the Arrhenius behavior. At high temperatures, residence times at M12−T11−T11−T1 and M12 sites become similar and conductivity significantly increase. This superionic state can be achieved by enlarged order-disorder transformations in rhombohedral phases, or by sharp first order transitions in triclinic ones. Results described in the LiTi2(PO4)3 sample have been compared with those obtained in rhombohedral Li1+xTi2-xAlx(PO4)3 and LiTi2-xZrx(PO4)3 series showing respectively higher and lower conductivities. In the case of Li1.2Ti1.8Al0.2(PO4)3, displaying the highest reported conductivity, NMR results are discussed in relation with those obtained by Neutron Diffraction (ND) and Impedance Spectroscopy (IS). Diffusion coefficients determined by NMR Pulse Field Gradient (PFG) technique are similar to those deduced from Impedance Spectroscopy and NMR relaxation data.