This research proposes an inexpensive technique for wireless image transfer for security and surveillance applications. The technique uses a 5.8 GHz transmitter and receiver module, along with external antennas in the real-time image transfer within a radius of 100 m. The transferred images are stored in a laptop using a Python code-based graphical user interface application. Different antennas, dipole, circular split-ring resonators, hexagonal split-ring resonators, and metamaterial antennas are utilized for comparison. The Blind/Referenceless Image Spatial Quality Evaluator method is used to assess the picture quality of transferred images to quantify image transfer performance when no ground truth or reference photos are supplied. According to the presented results, images transferred using metamaterial antennas have higher quality than those transferred with other types of antennas. For security considerations, such a system can communicate and store the images in real time.

In this paper, two asymmetric co-planar waveguide (ACPW) fed circularly polarized (CP) zeroth-order resonance (ZOR) antennas (Antenna I and II) are presented using a composite right and left-handed transmission line (CRLH-TL) approach. By adding a stub on the left side of the ACPW ground and adjusting its length, circularly polarization property has been achieved in Antenna I. The simulated 3 dB axial ratio bandwidth (ARBW) of Antenna I is 1750 MHz (3.50–5.25 GHz). Next, the left side ground plane of Antenna I is further defected by etching a quarter wavelength slit to introduce a notch band (Antenna II). Antenna II has an extended 10 dB return loss bandwidth of 2200 MHz (3.28–5.48 GHz) with a band notch from 4.18–4.65 GHz that isolates the WiMAX and 5.2 GHz WLAN bands. ARBWs of 1080 and 870 MHz are achieved in the first and second band of Antenna II. The overlapping 3 dB ARBW and 10 dB return loss bandwidths of Antenna II in these two bands are 770 and 830 MHz, respectively.

In this paper, a multiple input multiple output antenna which operates at 5.8 GHz for wireless local area network applications is proposed. The proposed antenna is composed of two sets of four elements antenna array (2 × 2) on the top and a novel metamaterial structure on the ground plane. Here, the ground plane, which includes a lattice of 2 × 5 unit cells of metamaterial structure, is utilized in order to improve parameters of the antenna. Thanks to the proposed metamaterial structure, not only gain and bandwidth of antenna are enhanced, but also mutual coupling is reduced. The final design, with an overall size of 137 × 77 × 3.048 mm3, resulted in a |S11| <−10 dB bandwidth of 1.78 GHz and a peak gain of 9.2 dBi. In addition, the isolation is higher than 18 dB although the close separation from edge to edge of the two antennas is only 2 mm and radiation efficiency of 73% at the operating frequency band. All is simulated based on CST Studio software and the simulated S-parameter results of the antenna are in good agreement with measurement results.