Benghal dayflower and sicklepod are weeds of economic importance in peanut in the southeastern United States due to their extended emergence pattern and limited effective herbicides for control. Field studies were conducted near Jay, Florida, in 2022 and 2023, to evaluate the effect of planting date and herbicide combinations on Benghal dayflower and sicklepod control in peanut crops. Peanut planted in June was exposed to a higher Benghal dayflower density than peanut planted in May. Sicklepod density was similar between May and June planting dates at 28 d after preemergence and early postemergence herbicide applications, but density was greater in peanut that was planted in June, 28 d after the mid-postemergence application. A preemeergence herbicide application followed by (fb) an early postemergence application of S-metolachlor or diclosulam + S-metolachlor controlled Benghal dayflower 84% to 93% 28 d after early postemergence in peanut that was planted in May, but control was reduced to 58% to 78% in the crop that had been planted in June. Regardless of planting date, a preemeergence application fb S-metolachlor or diclosulam + S-metolachlor applied early postemergence provided <80% sicklepod control 28 d after early postemergence. Imazapic + dimethenamid-P + 2,4-DB applied postemergence improved Benghal dayflower control to at least 94% 28 d after mid-postemergence, but sicklepod control was not >85%. Regardless of the planting date, paraquat + bentazon + S-metolachlor applied early postemergence was required to achieve ≥95% sicklepod control. However, herbicide combinations that included paraquat + bentazon + S-metolachlor reduced peanut yield when planting was delayed to June. In fields that are infested with Benghal dayflower and sicklepod, it is recommended that peanut be planted in early May to minimize the potential impact of these weeds and to increase peanut yield. Late-planted peanut required more intensive herbicide applications to obtain the same peanut yield as the May-planted peanut.

Amaranthus species are problematic weeds in snap bean production systems. They reduce crop yields, and their stem fragments contaminate harvested pods. Knowledge of snap bean tolerance to different preemergence herbicides is limited; however, knowing this tolerance is essential for planning a reliable weed management system, breeding herbicide-tolerant cultivars, and registering herbicides for use on minor crops such as snap bean. Field trials were conducted in 2021 and 2022 to determine the tolerance of eight snap bean cultivars to preemergence herbicides with activity on Amaranthus species, including dimethenamid-P, flumioxazin, lactofen, metribuzin, saflufenacil, and sulfentrazone. Snap bean plant density (number of plants per square meter), plant biomass (grams per plant), and canopy biomass (grams per square meter) 21 d after treatment were used to assess crop tolerance to a range of herbicide rates. Linear mixed-effects regression models were fitted to quantify the relationships between preemergence herbicide rate and snap bean cultivar tolerance. Results indicated a high margin of crop safety with dimethenamid-P and lactofen for weed control in snap bean, and a low margin of crop safety with metribuzin and saflufenacil. Results indicated differential cultivar tolerance to flumioxazin and sulfentrazone, which could be driven by genetic variability among cultivars.

Sicklepod is one of the most difficult to control weeds in peanut production in the southeastern United States due to its extended emergence pattern and limited effective herbicides for control. Growers rely on preemergence herbicides as the foundation of their weed control programs; however, postemergence herbicides are often needed for season-long weed control. The objectives of this study were to evaluate the effect of planting pattern and herbicide combinations for sicklepod control in peanut crops. Due to rapid canopy closure, twin-row planting improved late-season sicklepod control by 13% and peanut yield by 5% compared with a single-row pattern. A preemergence application of fluridone, flumioxazin, or fluridone + flumioxazin provided 76% to 89% control of sicklepod 28 d after preemergence. Regardless of the herbicide applied preemergence, paraquat + bentazon + S-metolachlor applied early postemergence was required to achieve ≥90% sicklepod control 28 d after early postemergence. All preemergence herbicide treatments followed by (fb) S-metolachlor or diclosulam + S-metolachlor applied early postemergence provided <90% control 28 d after early postemergence. A mid-postemergence application of imazapic + dimethenamid-P + 2,4-DB controlled sicklepod by 67% to 79% prior to peanut harvest, and biomass reduction was unacceptable (<80%), resulting in difficulty in peanut digging. The highest peanut yield was observed when paraquat + bentazon + S-metolachlor was applied early postemergence fb imazapic + dimethenamid-P + 2,4-DB applied mid-postemergence. Based on the results of this study, a herbicide combination of paraquat + bentazon + S-metolachlor is an important early-season tool for controlling sicklepod in peanut crops. The results also showed that a twin-row planting pattern improved late-season sicklepod control but did not reduce herbicide input to protect peanut yield.

Soil-applied herbicides are important for controlling weeds in many crops but risk damage to susceptible rotational crops if they persist. Field studies were conducted in Powell, WY, from 2015 through 2017 to evaluate the effect of reduced water availability on soil-applied herbicide dissipation. Eight soil-applied herbicides, applied to dry bean or corn, were exposed to three season-long irrigation treatments (100%, 85%, and 70% of estimated crop evapotranspiration [ETc]) by overhead sprinkler. Soil samples were collected to a depth of 10 cm from 0 to 140 d after application, and soil herbicide concentrations were quantified using gas or liquid chromatography and mass spectrometry. Herbicide concentrations were regressed over time to produce a soil half-life estimate for each herbicide and irrigation treatment. Reduced irrigation decreased dry bean yield by up to 77% and corn yield by up to 50%. After adjusting for precipitation, the lowest irrigation treatment received 78% and 76% as much water as the full irrigation treatment in 2015 and 2016, respectively. This significantly increased the soil half-life of imazethapyr but did not increase the soil half-life of atrazine, pyroxasulfone, saflufenacil, ethalfluralin, trifluralin, or pendimethalin. Reduced irrigation did not increase carryover injury to rotational crops from these herbicides 1 yr after application. Instead, carryover response was determined by the inherent persistence of individual herbicides. Imazethapyr (0.1 kg ai ha−1) injured rotational sugar beet, and isoxaflutole (0.1 kg ai ha−1) injured rotational dry bean. Pyroxasulfone (0.2 kg ai ha−1), atrazine (2.0 kg ai ha−1), saflufenacil (0.1 kg ai ha−1) + dimethenamid-P (0.6 kg ai ha−1), ethalfluralin (0.8 kg ai ha−1), trifluralin (0.6 kg ai ha−1), and pendimethalin (1.1 kg ai ha−1) did not injure rotational crops regardless of irrigation treatment. Drought stress sufficient to cause up to 77% crop yield loss did not increase soil-applied herbicide carryover.

Herbicide-resistant Palmer amaranth is a troublesome weed in several agronomic crops and is a relatively new challenge to dry bean production in western Nebraska. Objectives were to evaluate preemergence (PRE) and postemergence (POST) herbicides for control of acetolactate synthase–resistant Palmer amaranth and their effect on Palmer amaranth density and biomass as well as dry bean injury and yield in western Nebraska. Field experiments were conducted in 2017 and 2019 near Scottsbluff, NE. The experiments were arranged as a two-factor strip-plot design. The strip-plot factor consisted of no-PRE or pendimethalin (1,070 g ai ha–1) + dimethenamid-P (790 g ai h–1) applied PRE. The main-plot factor was POST herbicides, which consisted of various mixtures of imazamox, bentazon, or fomesafen applied in a single or sequential application at labeled rates, and reduced rates of imazamox (9 g ai ha–1) + bentazon (314 g ai ha–1) + fomesafen (70 g ai ha–1) applied in single or sequential (two or three) applications. PRE herbicides reduced Palmer amaranth density and biomass during both years and increased dry bean yield in 2017. POST treatments containing fomesafen improved Palmer amaranth control compared with treatments containing imazamox and bentazon only. The sequential-application reduced-rate POST system did not improve Palmer amaranth control compared to one POST application containing fomesafen at a labeled rate in either year. Using pendimethalin + dimethenamid-P PRE followed by POST treatments containing imazamox + bentazon + fomesafen at a labeled rate provided 86% and 99% Palmer amaranth control in 2017 and 2019, respectively.

Biotypes of Palmer amaranth that are resistant to acetolactate synthase (ALS) inhibitor are becoming widespread in western Nebraska. There are limited effective postemergence (POST) herbicides labeled for ALS-inhibitor-resistant Palmer amaranth control in dry edible bean. The objective of this study was to evaluate the efficacy of dimethenamid-P in a sequential preemergence (PRE) fb followed by (fb) POST program at two POST application timings, the first and third trifoliate stages (V1 and V3, respectively), for controlling ALS-inhibitor-resistant Palmer amaranth in dry edible bean. A field study was conducted in 2019, 2020, and 2021 in Scottsbluff, NE. PRE-alone applications of pendimethalin + dimethenamid-P provided inconsistent Palmer amaranth control. Dimethenamid-P applied POST following a PRE application of pendimethalin + dimethenamid-P provided effective (>90%) Palmer amaranth control at 4 wk after V3 only at the V1 application timing in 2019. In 2020 and 2021 dimethenamid-P applied POST at V1 and V3 following a PRE application of pendimethalin + dimethenamid-P provided 99% and 98% Palmer amaranth control at 4 wk after V3, and 98% and 94% Palmer amaranth control at harvest, respectively. Palmer amaranth biomass was reduced by 95% to 99% and by 96% to 98% compared with the -nontreated control when dimethenamid-P was applied POST at V1 and V3, respectively, following a PRE application of pendimethalin + dimethenamid-P in 2020 and 2021. Application of a mixture of dimethenamid-P with imazamox + bentazon POST provided similar results to those of the fomesafen-containing treatments and dimethenamid-P alone POST. Dimethenamid-P applied POST following a PRE application of pendimethalin + dimethenamid-P resulted in similar yield as the fomesafen-containing treatments. If fomesafen is not an option due to the crop rotation interval restriction, using dimethenamid-P in a sequential PRE fb POST program is the only effective alternative to control ALS-inhibitor–resistant Palmer amaranth in Nebraska. The use of dimethenamid-P in a sequential PRE fb POST program, alone or mixed with foliar-active herbicides should be considered by dry edible bean growers who are dealing with ALS-inhibitor-resistant Palmer amaranth.

Studies were conducted in 2019 and 2020 in Lewiston, NC, to determine the crop response of 4-hydroxyphenylpyrivate dioxygenase (HPPD)-resistant cotton to isoxaflutole (IFT) and other cotton herbicides as part of a cotton weed management program that included herbicides applied preemergence, early postemergence (EPOST), and mid-postemergence (MPOST). IFT was applied PRE at 105 g ha−1 alone and in various combinations with acetochlor, diuron, fluometuron, fluridone, fomesafen, pendimethalin, and pyrithiobac. EPOST treatments included IFT at 53 or 105 g ha−1 alone or in combination with glyphosate or glufosinate, or dimethenamid-P + glufosinate. Glyphosate + glufosinate was applied MPOST to all treatments except the nontreated control. Cotton injury from IFT applied PRE was minimal (0% to 3%). Injury following EPOST application of dimethenamid-P + glufosinate ranged from 3% to 5% and 6% to 9% in 2019 and 2020, respectively. In both years, injury from IFT applied PRE followed by IFT applied EPOST never exceeded injury from IFT applied PRE followed by dimethenamid-P + glufosinate. Isoxaflutole applied PRE followed by IFT applied EPOST at 105 g ha−1 resulted in 0% to 2% cotton injury, indicating that IFT can be applied either PRE or EPOST with minimal risk to cotton. Late-season cotton height and cotton lint yield were not affected by any herbicide treatment. The experimental HPPD-resistant cotton cultivar was minimally injured by IFT applied PRE and EPOST, it tolerated standard cotton herbicides, and yield loss was not observed. Given these results, HPPD-resistant cotton and IFT may be integrated into cotton weed management systems with minimal risk for cotton injury and provide an additional effective mechanism of action for managing troublesome weeds in cotton.

Control of glyphosate-resistant (GR) junglerice is a challenging task in eastern Australia. There is limited information on the efficacy and reliability of alternate herbicides for GR populations of junglerice, especially when targeting large plants and when temperatures are high. A series of experiments were conducted to confirm the level of glyphosate resistance in three populations of junglerice and to evaluate the efficacy of alternate herbicides for the control of GR junglerice populations. The LD50 of glyphosate of B17/7, B17/34, and B17/35 populations was found to be 298, 2,260, and 1,715 g ae ha–1, respectively, suggesting that populations B17/34 and B17/35 were highly resistant to glyphosate. Glyphosate efficacy was reduced at high-temperature (35 C day/25 C night) compared with low-temperature conditions (25 C day/15 C night), suggesting that control of susceptible populations may also be reduced if glyphosate is sprayed under hot conditions. Preemergence herbicides dimethenamid-P (1,000 g ai ha–1) and pendimethalin (1,500 g ai ha–1) provided 100% control of GR populations (B17/34 and 17/35). Postemergence herbicides, such as clethodim (60 or 90 g ai ha–1), glufosinate (750 g ai ha–1), haloxyfop (52 or 78 g ai ha–1), and paraquat (400 or 600 g ai ha–1), applied at the four-leaf stage provided 100% control of GR populations. For larger junglerice plants (eight-leaf stage), postemergence applications of paraquat (400 or 600 g ai ha–1) provided greater weed control than clethodim, glufosinate, and haloxyfop. A mixture of either glufosinate or haloxyfop with glyphosate provided poor control of GR junglerice populations compared with application of glufosinate or haloxyfop applied alone. Efficacy of glufosinate and haloxyfop for the control of GR populations decreased when applied in the sequential spray after glyphosate application. This study identified alternative herbicide options for GR junglerice populations that can be used in herbicide rotation programs for sustainable weed management.

The critical timing of weed removal (CTWR) is the point in crop development when weed control must be initiated to prevent crop yield loss due to weed competition. A field study was conducted in 2018 and 2020 near Scottsbluff, NE, to determine how the use of preemergence herbicides affects the CTWR in dry bean. The experiment was arranged as a split plot, with herbicide treatment and weed removal timing as main and sub-plot factors, respectively. Herbicide treatments consisted of no-preemergence application, or pendimethalin (1,070 g ai ha–1) + dimethenamid-P (790 g ai ha–1) applied preemergence. Sub-plot treatments included season-long weed-free, weed removal at: V1, V3, V6, R2, and R5 dry bean growth stages, and a season-long weedy control. A four-parameter logistic model was used to estimate the impact of time of weed removal, for all response variables including dry bean yield, dry bean plants m–1 row, number of pods per plant, number of seeds per pod, and seed weight. The CTWR based on 5% yield reduction was estimated to range from the V1 growth stage [(16 d after emergence (DAE)] to the R1 growth stage (39 DAE) in the no-preemergence herbicide treatment. In the preemergence-applied treatment, the CTWR began at the R2 growth stage (47 DAE). Number of dry bean plants m–1 row was reduced in the no-preemergence treatment when weed removal was delayed beyond the R2 growth stage in the 2020 field season. The use of preemergence herbicides prevented a reduction in the number of pods per plant in 2020, and the number of seeds per pod in 2018 and 2020. In 2018, the number of pods per plant was reduced by 73% when no preemergence herbicide was applied, compared to 26% in the preemergence-applied treatment. The use of preemergence-applied soil-active herbicides in dry bean delayed the CTWR and preserved yield potential.

Late-emerging summer annual weeds are difficult to control in dry bean production fields. Dry bean is a poor competitor with weeds, due to its slow rate of growth and delayed canopy formation. Palmer amaranth is particularly difficult to control due to season-long emergence and resistance to acetolactate synthase (ALS)-inhibiting herbicides. Dry bean growers rely on PPI and preemergence residual herbicides for the foundation of their weed control programs; however, postemergence herbicides are often needed for season-long weed control. The objective of this experiment was to evaluate effect of planting date and herbicide program on late-season weed control in dry bean in western Nebraska. Field experiments were conducted in 2017 and 2018 near Scottsbluff, NE. The experiment was arranged in a split-plot design, with planting date and herbicide program as main-plot and subplot factors, respectively. Delayed planting was represented by a delay of 15 d after standard planting time. The treatments EPTC + ethalfluralin, EPTC + ethalfluralin followed by (fb) imazamox + bentazon, and pendimethalin + dimethenamid-P fb imazamox + bentazon, resulted in the lowest Palmer amaranth density at 3 wk after treatment and the highest dry bean yield. The imazamox + bentazon treatment provided poor Palmer amaranth control and did not consistently result in Palmer amaranth density and biomass reduction compared with the nontreated control. In 2018, the delayed planting treatment had reduced Palmer amaranth biomass with the pendimethalin + dimethenamid-P treatment, as compared with standard planting. Delaying planting did not reduce dry bean yield and had limited benefit in improving weed control in dry bean.

Four field experiments were completed in commercial corn fields during 2019 and 2020 to determine glyphosate-resistant (GR) horseweed control in corn with tiafenacil alone or in combination with bromoxynil, dicamba, or tolpyralate applied preplant (PP). Corn planted 1 to 10 d after herbicide application was not injured with any of the herbicides tested. GR horseweed interference reduced corn grain yield 32% when left uncontrolled. Herbicides reduced GR horseweed interference and resulted in corn grain yield that was similar to the weed-free control. Glyphosate (900 g ae ha−1) + tiafenacil at 12.5, 25, and 37.5 g ha−1 controlled GR horseweed 63%, 68%, and 72% at 4 wk after treatment (WAT) and decreased GR horseweed density 64%, 43%, and 83% and dry biomass 69%, 55%, and 83%, respectively. Glyphosate + tiafenacil at 12.5, 25, and 37.5 g ha−1 plus bromoxynil (280 g ai ha−1) controlled GR horseweed 81%, 88%, and 87% at 4 WAT and reduced GR horseweed density 82%, 94%, and 93% and dry biomass 93%, 93%, and 98%, respectively. Glyphosate + tiafenacil at 12.5, 25, and 37.5 g ha−1 plus dicamba (300 g ai ha−1) controlled GR horseweed 86%, 88%, and 88% at 4 WAT and decreased GR horseweed density 76%, 89%, and 86% and dry biomass 94%, 98%, and 98%, respectively. Glyphosate + tiafenacil at 12.5, 25, and 37.5 g ha−1 plus tolpyralate (30 g ai ha−1) controlled GR horseweed 90%, 90%, and 91% at 4 WAT and decreased GR horseweed density 93%, 91%, and 95% and dry biomass 98%, 97%, and 97%, respectively. The industry standards in Ontario, glyphosate + dicamba/atrazine and glyphosate + saflufenacil/dimethenamid-p controlled GR horseweed 95% and 100% at 4, 8, and 12 WAT and caused 99% and 100% density or biomass reduction, respectively.

Amid widespread occurrence of herbicide-resistant weeds in the United States, the use of PRE herbicides and cover crops have resurged once again as important strategies for weed management in cropping systems. The objective of this experiment was to evaluate the length of soil residual weed control from PRE soybean herbicides and the detrimental impact of these herbicides on cover crop species using field treated soil in greenhouse bioassays. Greenhouse bioassays were conducted using soil from field experiments conducted in 2018 and 2019 in Arlington and Lancaster, WI. PRE herbicides consisted of imazethapyr, chlorimuron-ethyl, and cloransulam-methyl (acetolactate synthase [ALS] inhibitors); metribuzin (photosystem II [PS II] inhibitor); sulfentrazone, flumioxazin, and saflufenacil (protoporphyrinogen oxidase [PPO] inhibitors); acetochlor, S-metolachlor, dimethenamid-P, and pyroxasulfone (very long-chain fatty acid [VLCFA] inhibitors); and a nontreated control. Greenhouse bioassays were conducted using soil (depth, 0 to 10 cm) sampled at 0, 10, 20, 30, 40, and 50 d after treatment (DAT). Palmer amaranth and giant foxtail (weeds), and radish and cereal rye (cover crops) were used as bioindicators of herbicide levels in the soil. Bioassay results showed extended soil residual control of Palmer amaranth with sulfentrazone and pyroxasulfone; extended residual control of giant foxtail was observed with pyroxasulfone and S-metolachlor. Chlorimuron-ethyl and metribuzin were the most injurious herbicides to radish and cereal rye shortly after application, respectively, but minimal injury was observed from soil samples collected 50 DAT, indicating the use of PRE and fall-seeded cover crops in southern Wisconsin can be compatible. These results can support growers and practitioners with selection of effective PRE herbicides for Palmer amaranth and giant foxtail control and reduced impact on fall-seeded radish and cereal rye cover crops, altogether leading to more effective, diverse, and sustainable weed management programs.

Control of waterhemp is becoming more difficult in Ontario because biotypes have evolved resistance to four herbicide sites of action (SOA), including groups 2, 5, 9, and 14. The objective of this study was to compare PRE, POST, and PRE followed by (fb) POST herbicide programs for their effect on control, density, and biomass of multiple-herbicide–resistant (MHR) waterhemp as well as corn injury and grain yield. Two separate field studies, each consisting of five field trials, were conducted over a 2-yr period (2018 and 2019) in fields where corn was grown in Ontario, Canada. The first experiment evaluated MHR waterhemp control with an inhibitor of 4-hydroxyphenyl-pyruvate dioxygenase (HPPD) applied PRE, PRE fb glufosinate applied POST, and glufosinate applied POST. The second experiment evaluated MHR waterhemp control with a non-HPPD inhibitor applied PRE, then PRE fb a POST application of atrazine + mesotrione, and then atrazine + mesotrione applied POST. Atrazine + isoxaflutole caused 3% to 5% corn injury at environment 1 (E1); no corn injury was observed with PRE and POST herbicide programs at environments E2, E3, E4, and E5. In general, atrazine/bicyclopyrone/mesotrione/S-metolachlor and dimethenamid-P/saflufenacil applied PRE controlled MHR waterhemp ≥95% 12 wk after POST application (WAA). A POST application of glufosinate following atrazine + tolpyralate PRE, and a POST application of atrazine + mesotrione following atrazine/dicamba or atrazine/S-metolachlor PRE, improved control at 4, 8, and 12 WAA in most environments. In general, PRE fb POST applications resulted in better control of MHR waterhemp throughout the growing season than single PRE and POST applications (P < 0.05). We conclude that herbicide programs based on multiple effective SOAs may offer effective control of MHR waterhemp where field corn is grown. It is advisable that when choosing an herbicide application program that excellent control of MHR waterhemp should be the goal given its high fecundity and competitive ability.

Field experiments were conducted in 2016 and 2017 to evaluate the effects of seeding rate and herbicide programs on weed control and pinto bean yield under irrigation. The experiments comprised a 5 × 5 factorial randomized complete block design with five replications. The weed control treatments comprised a nontreated control, hand-weeded control, EPTC + ethalfluralin PRE, EPTC + ethalfluralin PRE followed by (fb) dimethenamid-P POST at V1, and EPTC + ethalfluralin PRE fb bentazon/imazamox POST. There were five seeding rates ranging from 247,000 to 494,000 seeds ha–1 planted in 19-cm rows. Weed biomass was reduced by 6 kg ha–1 with every additional 1,000 seeds ha–1. EPTC plus ethalfluralin fb either dimethenamid-P or bentazon plus imazamox reduced weed biomass by at least 29% compared to the nontreated control. There was a significant effect of weed control treatment on pinto bean yield (P = 0.0004). However, there was no significant seeding rate (P = 0.42) or seeding rate–by–weed control interaction effect on pinto bean yield (P = 0.38). Pinto bean yield ranged from 3,080 kg ha–1 in the nontreated control to 4,740 kg ha–1 hand-weeded treatment. Increased seeding rate in narrow rows is a cultural practice that can improve weed control in pinto bean but may not necessarily increase yield.

Weeds are difficult to control in potted tropical ornamentals, especially when plants are kept for extended time periods at a nursery. Management is complicated by the lack of tolerance data for many tropical species. Experiments were conducted in 2015, 2016, and 2017 at the Gulf Coast Research and Education Center in Balm, FL, to evaluate tolerance of stromanthe, croton, philodendron, arbicola, cordyline, ixora, plumbago, allamanda, bird-of-paradise, firebush, and hibiscus to granular applications of indaziflam, flumioxazin, pendimethalin + oxyfluorfen, pendimethalin + dimethenamid-P, trifluralin + oxyfluorfen + isoxaben, and trifluralin + isoxaben, and liquid applications of prodiamine + isoxaben and dimethenamid-P. Indaziflam, pendimethalin + oxyfluorfen, and trifluralin + oxyfluorfen + isoxabin were safe for use on all evaluated ornamentals except stromanthe. Dimethenamid-P and pendimethalin + oxyfluorfen were safe on all evaluated ornamentals except allamanda. Flumioxazin damaged philodendron and bird-of-paradise but was safe on all other ornamentals tested. Trifluralin + isoxaben and prodiamine + isoxaben were safe on hibiscus, firebush, and bird-of-paradise, but prodiamine + isoxaben damaged allamanda. We have identified multiple PRE herbicides that can safely be used on multiple tropical ornamentals grown in containers.

Annual grass weeds reduce profits of wheat farmers in the Pacific Northwest. The very-long-chain fatty acid elongase (VLCFA)-inhibiting herbicides S-metolachlor and dimethenamid-P could expand options for control of annual grasses but are not registered in wheat, because of crop injury. We evaluated a safener, fluxofenim, applied to wheat seed for protection of 19 soft white winter wheat varieties from S-metolachlor, dimethenamid-P, and pyroxasulfone herbicides; investigated the response of six varieties (UI Sparrow, LWW 15-72223, UI Magic CL+, Brundage 96, UI Castle CL+, and UI Palouse CL+) to incremental doses of fluxofenim; established the fluxofenim dose required to optimally protect the varieties from VLCFA-inhibiting herbicides; and assessed the impact of fluxofenim dose on glutathione S-transferase (GST) activity in three wheat varieties (UI Sparrow, Brundage 96, and UI Castle CL+). Fluxofenim increased the biomass of four varieties treated with S-metolachlor or dimethenamid-P herbicides and one variety treated with pyroxasulfone. Three varieties showed tolerance to the herbicides regardless of the fluxofenim treatment. Estimated fluxofenim doses resulting in 10% biomass reduction of wheat ranged from 0.55 to 1.23 g ai kg−1 seed. Fluxofenim doses resulting in 90% increased biomass after treatment with S-metolachlor, dimethenamid-P, and pyroxasulfone ranged from 0.07 to 0.55, 0.09 to 0.73, and 0.30 to 1.03 g ai kg−1 seed, respectively. Fluxofenim at 0.36 g ai kg−1 seed increased GST activity in UI Castle CL+, UI Sparrow, and Brundage 96 by 58%, 30%, and 38%, respectively. These results suggest fluxofenim would not damage wheat seedlings up to three times the rate labeled for sorghum, and fluxofenim protects soft white winter wheat varieties from S-metolachlor, dimethenamid-P, or pyroxasulfone injury at the herbicide rates evaluated.

Giant reed recently was promoted as a biofuel crop in Oregon. Because giant reed is a highly invasive plant in North American rivers, the planting of this species in Oregon is a cause for concern to scientists and local land managers. However, some growers in the area were interested in producing giant reed as a rotational crop. To find potential herbicides to control the giant reed or to control it as a volunteer, 13 foliar and 13 cut-and-spray herbicide treatments were preevaluated in greenhouse studies. We chose 10% and 85% reduction in aboveground biomass for either crop safety or control, respectively. When applied at the standard rates, acetochlor and dimethenamid-p reduced aboveground dry biomass of the crop by 10% or less. Acetochlor+atrazine, atrazine, flufenacet, and mesotrione reduced aboveground biomass of the crop by at least 85%, indicating that these compounds have the potential to serve as controls against giant reed.

Palmer amaranth is one of the most troublesome weeds of soybean in the United States. To effectively control this weed it is necessary to optimize timing of PRE residual herbicides to mitigate Palmer amaranth emergence. Field studies were conducted in 5 site-years to assess the effect of application timing 12 to 16 d prior to planting (preplant) and at planting (PRE) on soybean injury and longevity of Palmer amaranth control using five residual herbicide treatments. A reduction in longevity of Palmer amaranth control was observed when S-metolachlor + metribuzin and flumioxazin + chlorimuron-ethyl were applied preplant vs. PRE in 2 of the 5 site years. Sulfentrazone, sulfentrazone + cloransulam-methyl, and saflufenacil + dimethenamid-P + pyroxasulfone + metribuzin did not reduce longevity of Palmer amaranth control when applied preplant vs. PRE in all 5 site-years. Visible estimates of soybean injury were lower at 21 d after planting when herbicides were applied 12 to 16 d preplant vs. PRE. These findings suggest that preplant applications can be used to reduce the potential for crop injury and may not result in reduced longevity of control when herbicides with a prolonged residual activity are used. Preplant herbicides increase the likelihood of the residuals being activated prior to subsequent weed emergence as opposed to PRE herbicides applied at soybean planting.

Evolution of kochia resistance to glyphosate and dicamba is a concern for growers in the US Great Plains. An increasing use of glyphosate and dicamba with the widespread adoption of glyphosate/dicamba-resistant (GDR) soybean in recent years may warrant greater attention. Long-term stewardship of this new stacked-trait technology will require the implementation of diverse weed control strategies, such as the use of soil-residual herbicides (PRE) aimed at effective control of GDR kochia. Field experiments were conducted in Huntley, MT, in 2017 and 2018, and Hays, KS, in 2018 to determine the effectiveness of various PRE herbicides applied alone or followed by (fb) a POST treatment of glyphosate plus dicamba for controlling GDR kochia in GDR soybean. Among PRE herbicides tested, sulfentrazone provided complete (100%), season-long control of GDR kochia at both sites. In addition, PRE fb POST programs tested in this study brought 71% to 100% control of GDR kochia throughout the season at both sites. Pyroxasulfone applied PRE resulted in 57% to 70% control across sites at 9 to 10 wk after PRE (WAPRE). However, mixing dicamba with pyroxasulfone improved control up to 25% at both sites. Kochia plants surviving pyroxasulfone applied PRE alone produced 2,530 seeds m−2 compared with pyroxasulfone + dicamba (230 seeds m−2) at the Montana site. No differences in soybean grain yields were observed with PRE alone or PRE fb POST treatments at the Montana site; however, dicamba, pyroxasulfone, and pendimethalin + dimethenamid-P applied PRE brought lower grain yield (1,150 kg ha−1) compared to all other tested programs at the Kansas site. In conclusion, effective PRE or PRE fb POST (two-pass) programs tested in this research should be proactively utilized by the growers to manage GDR kochia in GDR soybean.

Cover cropping is limited by seasonal constraints following corn harvest in the Upper Midwest of the United States. Grass, clover, and brassica cover crops can be interseeded in corn; however, this is problematic because cover crops must tolerate herbicide applications to manage weeds. The objective of this research was to determine the tolerance of broadcast interseeded annual ryegrass, oilseed radish, and crimson clover to PRE and POST residual herbicide applications in corn. From 2016 to 2018 field trials were conducted in Michigan to determine the tolerance of annual ryegrass, oilseed radish, and crimson clover to 13 PRE and 14 POST (applied to V2 corn) herbicides. Cover crops were interseeded into corn at the V3 and V6 stages. Greenhouse experiments to evaluate these species were also conducted from 2016 to 2018; PRE and POST herbicides were applied at 1×, 0.5×, and 0.25× (0.25× was PRE only) of field-application rates. Based on these results, annual ryegrass can be interseeded into V3 or V6 corn following a PRE application of atrazine, clopyralid, saflufenacil, bicyclopyrone, isoxaflutole, or mesotrione, or a POST application of atrazine, bromoxynil, or mesotrione. Oilseed radish can be interseeded into V3 or V6 corn following a PRE application of clopyralid, atrazine, S-metolachlor, bicyclopyrone, or isoxaflutole or at V6 following application of acetochlor, dimethenamid-P, or mesotrione. Oilseed radish can also be interseeded following POST application of atrazine (571 g ai ha−1), bromoxynil, fluthiacet, acetochlor, mesotrione, dicamba + diflufenzopyr, or dimethenamid-P + topramezone. In greenhouse trials, crimson clover was tolerant to rimsulfuron, saflufenacil, and pyroxasulfone applied PRE. Annual ryegrass and oilseed radish can be interseeded into corn at the V3 and V6 stages, but special attention must be given to cover crop species selection and herbicide label restrictions when following herbicide applications in corn.