Bridgesite-(Ce), (IMA2019-034), was discovered at Tynebottom Mine, Cumbria, UK. It occurs as thin (1–2 μm) translucent blue crystals with a lath-like to acicular habit, aggregated into thin crusts and is associated mainly with brochantite, malachite, serpierite, devilline, gypsum, aragonite, jarosite, pyrite, lanthanite-(Ce) and undifferentiated iron oxyhydroxides, it is often intergrown with these other minerals. The lustre, hardness, cleavage and parting could not be determined, nor could density be measured due to crystal size. It has a pale blue streak and is brittle with a splintery fracture. Bridgesite-(Ce) is biaxial (–), shows no pleochroism and has refractive indices (white light): α = 1.526(2), β = 1.564(2), γ = 1.572(2) and 2V(calc) = 48.3°. The empirical formula calculated on the basis of 44 negative charges is Ca0.86REEΣ1.99Al0.07Cu5.95(SO4)3.99(SiO4)0.05(PO4)0.02(OH)11.52⋅8H2O. The idealised formula is CaCe2Cu6(SO4)4(OH)12⋅8H2O, requiring (wt.%): 3.91 CaO, 22.89 Ce2O3, 33.28 CuO, 22.33 SO3 and 17.59 H2O. Bridgesite-(Ce) is monoclinic, space group C2/m, a = 24.801(5), b = 6.3520(13), c = 11.245(2) Å, β = 114.51(3)°, V = 1611.9(6) Å and Z = 2. The five most intense X-ray diffraction peaks in the measured pattern are [d in Å (I, %) (hkl)]: 11.3 (100) (200), 6.391 (15) (201), 2.770 (8) (420), 3.194 (6) (402) and 4.858 (5) (310). The crystal structure was solved using single crystal data and refined to an R1 index of 5.86%. Bridgesite-(Ce) contains three distinct Cu sites containing Cu2+, two are coordinated octahedrally and one is square pyramidal. The octahedra form chains through edge sharing parallel to the b-axis which are linked by the square pyramid to form sheets oriented parallel to {100}. Sulfate tetrahedra decorate the sheets which are held together by interstitial REE3+, Ca2+ and hydrogen bonding. The structure is unique. Despite apparent similarity in chemical formula, bridgesite-(Ce) is not closely related to any other natural Cu-sulfate mineral. An FTIR absorption spectra is presented for reference purposes.

Philipsburgite has been redefined as the intermediate member of the goldhillite–philipsburgite–kipushite isomorphous series with the ideal formula Cu5Zn[(AsO4)(PO4)](OH)6⋅H2O due to the site-selective As–P substitution. The new mineral goldhillite, ideally Cu5Zn(AsO4)2(OH)6⋅H2O [or Cu5Zn(AsO4)(AsO4)(OH)6⋅H2O], is the arsenate end-member of this series. Goldhillite occurs on fracture surfaces in a rock comprised mostly of quartz with iron hydroxides in association with mixite, cornwallite and conichalcite. Goldhillite forms transparent, bright emerald-green, tabular crystals with vitreous lustre, flattened on {100}, up to 1 mm across and in rosettes up to 1.5 mm. The mineral is brittle with uneven fracture and perfect cleavage on {100}; the Mohs hardness is 3.5. The calculated density for the holotype is 4.199 g cm–3. The Raman spectrum is consistent with the presence of H2O-molecules, OH-groups, AsO4 tetrahedra and traces of PO4. Electron microprobe analyses of goldhillite (H2O content based on the crystal structure) provided: CuO 48.91, ZnO 13.18, As2O5 26.06, P2O5 3.25, H2O 8.97, total 100.37 wt.%. The empirical formula for goldhillite based on O = 15 apfu is (Cu4.69Zn1.23)Σ5.92(As0.86P0.18O4)2(OH)5.61⋅H2O. The crystal structures of goldhillite and philipsburgite were determined using single-crystal X-ray diffraction data and refined to R1 = 0.054 (for 2365 I > 2σI reflections) and 0.052 (for 2308 I > 2σI reflections), respectively. Goldhillite is monoclinic, P21/c, a = 12.3573(5), b = 9.2325(3), c = 10.7163(4) Å, β = 97.346(4)°, V = 1212.59(8) Å3 and Z = 4. Philipsburgite is monoclinic, P21/c, a = 12.3095(9), b = 9.2276(3), c = 10.7195(3) Å, β = 97.137(7)°, V = 1208.16(10) Å3 and Z = 4. The strongest lines of the powder X-ray diffraction pattern of goldhillite [d, Å (I, %)(hkl)] are: 4.09 (28)(300), 3.41 (23)(12$\bar{2}$, 221, 311), 2.57 (100)(132, 11$\bar{4}$, 20$\bar{4}$), 2.17 (18)(42$\bar{3}$, 332), 1.95 (22)(432) and 1.54 (20)(13$\bar{6}$, 060). Goldhillite is named after its type locality, the Gold Hill mine, Tooele County, Utah, USA.

Sluzhenikinite, Pd15(Sb7–xSnx) with 3 ≤ x ≤ 4, is a new mineral discovered in the pegmatoidal galena–chalcopyrite massive ore from the Oktyabrsk mine, Oktyabrsk deposit of the Noril`sk deposits, Russia. Sluzhenikinite forms euhedral elongate lamellar crystals (100–150 μm long and 10–50 μm wide) associated with Au–Ag alloy, insizwaite and myrmekitic intergrowths of Pt–Pd minerals (stibiopalladinite, maslovite and sobolevskite), in close association of sperrylite and base-metal sulfides (galena, chalcopyrite, cubanite and pentlandite). In plane-polarised light, sluzhenikinite is pale brown with weak bireflectance, imperceptible pleochroism, and weak anisotropy with straw yellow to deep blue rotation tints; it exhibits no internal reflections. Reflectance values for sluzhenikinite in air (R1,R2 in %) are: 46.2, 46.5 at 470nm; 52.1, 52.2 at 546nm; 54.7, 55.1 at 589nm; and 57.8, 59.0 at 650nm. Thirteen electron-microprobe analyses of sluzhenikinite gave an average composition: Pd 65.06, Sn 15.60 and Sb 19.58, total 100.24 wt.%, corresponding to the formula Pd14.88(Sb3.92Sn3.20)Σ7.12 based on 22 atoms; the average of twenty-one energy dispersive spectroscopy analyses on co-type material gave: Pd 63.36, Pt 1.15, Sn 16.28 and Sb 19.21, total 100.00 wt.%, corresponding to the formula (Pd14.62Pt0.14)Σ14.76(Sb3.87Sn3.37)Σ7.24. The density, calculated on the basis of the empirical formula, is 11.22 g/cm3. The mineral is monoclinic, space group P21/m, with a = 7.5558(1), b = 29.2967(3), c = 7.5713(1) Å, β = 119.931(2)°, V = 1452.44(4) Å3 and Z = 4. The crystal structure was determined using data from single-crystal X-ray diffraction and demonstrates conclusively that the correct stoichiometry is Pd15(Sb,Sn)7, rather than Pd2(Sb,Sn); R1 = 0.035, wR2 = 0.073, GoF = 1.118 for 209 refined parameters and 4738 unique reflections. The mineral is named after Sergey Fedorovich Sluzhenikin, an expert on platinum-group minerals, particularly from the area of the type locality.

Zolotarevite (IMA2020-076), ideally Na5Zr[Si6O15(ОН)3]⋅2–3H2O, is а new mineral of the lovozerite group. The mineral was found in a leucocratic nepheline syenite from Kedykverpakhk Mt., Lovozero alkaline massif, Kola Peninsula, Russia. It occurs as anhedral grains up to 1 mm across and is associated with microcline–perthite, nepheline, sodalite, aegirine, lamprophyllite, lueshite, umbozerite, lomonosovite, nastrophite, a mineral of the kazakovite–tisinalite series, sphalerite and löllingite. Zolotarevite is cherry red, with a vitreous lustre and white streak. The mineral is brittle, with a Mohs hardness of 5. Cleavage was not observed; the fracture is uneven. The measured density is 2.75(5) g⋅cm–3, the density calculated using the empirical formula and single-crystal unit-cell parameters is 2.85 g⋅cm–3. Zolotarevite is anomalously biaxial (–), α = 1.580(2), β = 1.600(2) and γ = 1.602(2) (for λ = 589 nm); 2Vmeas < 10°. Chemical data (electron microprobe, wt.%) are: Na2O 20.41, СаО 0.42, MnO 3.49, Fе2O3 0.55, SiO2 52.46, ТiO2 1.34, ZrO2 11.33, H2O (calculated from the structural formula) 10.20, total 100.20. The empirical formula based оn 6 Si atoms per formula unit is Na4.53Zr0.63Mn0.34Ti0.11Ca0.05Fe3+0.05Si6O14.43(ОН)3.56(H2О)2.11. Zolotarevite is trigonal, space group R${\bar 3}$m, with a = 10.294(6) Å, c = 13.115(8) Å, V = 1203.7(16) Å3 and Z = 3. The crystal structure was solved from single-crystal data and refined to R1 = 0.049. The strongest lines of the powder X-ray diffraction pattern [d in Å (I) (hkl)] are: 7.37 (69) (101); 5.26 (56) (012); 3.686 (64) (202); 3.330 (79) (113); 3.265 (99) (211), 2.640 (100) (024) and 2.576 (60) (220). Zolotarevite is unique in that it is a highly hydrated lovozerite-group mineral with the B site occupied by variable amounts of H2O.

The recently defined arctite supergroup contains nine mineral members defined as hexagonal intercalated antiperovskites, most of which have been found in pyrometamorphic rocks of the Hatrurim Complex, Israel. Three members of this supergroup: nabimusaite, gazeevite and zadovite, were identified for the first time in altered carbonate–silicate xenoliths from the Caspar and Scherer quarries, Bellerberg volcano in Germany. Present work focuses on the chemical, structural and spectroscopic investigation of these minerals and their correlation with holotype counterparts. The apparent differences are mainly related to the chemical composition, types of substitution in the tetrahedral and antiperovskite layers within the crystal structure, and position of bands in the Raman spectra. In the Bellerberg volcano xenoliths, the crystallisation of nabimusaite and gazeevite is caused by high-temperature alteration of early mineral associations (clinker-like phases) and their reaction with melt or gas generated by volcanic activity. In turn, the formation of zadovite is related to the Ba-rich silicate melt that filled the intergranular space between the rock-forming minerals.

Crystallographic distortions in the alternating aluminium and silicon tetrahedral framework of sodalite (Na8Al6Si6O24Cl2), and beryllium and silicon in helvine (Mn8Be6Si6O24S2), (framework designated SOD) are described in terms of a set of condensed normal mode amplitudes and phases derived from an ideal tetrahedron of a theoretical aristotype phase. For a sodalite-structured hettotype phase in space group $P{\overline 4} 3n$, these normal modes transform as the irreducible representations A1, E(α) and T1(z) of point-group ${\overline 4} 3m$, where to a good approximation A1 acts as a pure breathing mode, E(α) as a polyhedral distortive mode and T1(z) as a rigid unit rotation about the unique ${\overline 4}$ axis of the T-site under consideration. Parameterisation of the mode amplitudes in terms of low-order polynomials as a function of thermodynamic variable permits the crystal structure of sodalite-structured phases to be accurately interpolated at intermediate values of the thermodynamic variable. Published data for the high-temperature behaviour of sodalite have been re-analysed in terms of mode amplitudes which accurately reproduce the temperature dependence of the bond lengths, bond angles and the Al–O–Si inter-polyhedral angle. Full expressions for these derived structural parameters in terms of mode amplitudes and the lattice parameter are tabulated and agree with experimental results to within one estimated standard deviation of the experimental parameter. The potential for mode decomposition in lower symmetry SOD framework crystal structures is illustrated by deriving an aristotype structure for tugtupite (Na8Al2Be2Si8O24Cl2) at room temperature in space group $I{\overline 4}$.

A new mineral species, franksousaite (IMA2021-096), ideally PbCu(Se6+O4)(OH)2, has been found from the El Dragón mine, Antonio Quijarro Province, Potosí Department, Bolivia. It occurs as short prismatic crystals included in colourless anglesite. Associated minerals are Co-bearing krut'aite–penroseite, chalcomenite, schmiederite, olsacherite, phosgenite, anglesite and cerussite. Franksousaite is blue in transmitted light, transparent with very pale blue streak and has a vitreous lustre. It is brittle and has a Mohs hardness of 2–2½. Cleavage is perfect on {100}. The calculated density is 5.64 g/cm3. An electron microprobe analysis yielded an empirical formula (based on 6 O apfu) of Pb1.02Cu0.98[(Se0.84S0.17)Σ1.01O4)](OH)2, which is simplified to PbCu[(Se,S)O4)](OH)2.

Franksousaite is the Se6+ analogue of linarite, PbCu(SO4)(OH)2. It is monoclinic, with space group P21/m and unit-cell parameters a = 9.8208(3), b = 5.7340(2), c = 4.74980(10) Å, β = 102.683(2)°, V = 260.947(13) Å3 and Z = 2. The crystal structure of franksousaite consists of Jahn-Teller-distorted Cu2+O6 square bipyramids, which form chains along b by sharing trans edges across their square planes. The chains are decorated by SeO4 tetrahedra and linked to one another by hydrogen bonds to form layers parallel to (100). These layers are bound together by double layers of PbO8 and SeO4 polyhedra. The PbO8 polyhedron exhibits one-sided coordination typical of Pb2+ with a stereochemically active 6s2 lone-electron-pair. The major structural difference between franksousaite and linarite lies in the <Se–O> vs. <S–O> bond distances (1.615 vs. 1.482 Å), accounting for the larger unit-cell volume for franksousaite. A comparison of Raman spectra for the four minerals in the linarite group (linarite, franksousaite, munakataite and schmiederite) reveals the obvious differences among them, especially in the range from 700 to 1000 cm–1, indicative of the presence or absence of (Se4+O3)2–, (Se6+O4)2–, and/or (SO4)2– groups.

Lombardoite, ideally Ba2Mn3+(AsO4)2(OH), and aldomarinoite, ideally Sr2Mn3+(AsO4)2(OH), are two new minerals of the arsenbrackebuschite group in the brackebuschite supergroup, discovered in Fe–Mn ore in metaquartzites of the abandoned mine of Valletta, Canosio, Val Maira, Cuneo Province, Piedmont, Italy. They occur as red–brown and orange brown, respectively, as subhedral crystals (< 0.5 mm) in thin masses, associated with quartz, aegirine, baryte, calcite, hematite, muscovite and Mn minerals such as cryptomelane, braunite and manganberzeliite. Both minerals are translucent, have yellow–orange streak and vitreous lustre. Both are brittle. Estimated Mohs hardness is 6–6½ for lombardoite (by analogy to canosioite), and 4½–5 for aldomarinoite (by analogy to tokyoite). Calculated densities are 5.124 g/cm3 for lombardoite and 4.679 g/cm3 for aldomarinoite. Both minerals are biaxial (+). Lombardoite shows 2Vz(meas.) = 78(4)° and is pleochroic with X = yellowish brown, Y = brown and Z = reddish brown (Z > Y > X). Aldomarinoite has 2Vz(meas.) = 67.1(1)°, and is pleochroic with X = brown, Y = brownish orange and Z = yellowish brown (Z > Y > X). Point analyses by electron microprobe using wavelength dispersive spectroscopy resulted in the empirical formula (based on 9 O anions): (Ba1.96Sr0.17Pb0.04Na0.02Ca0.02)Σ2.21(Mn3+0.62Fe3+0.13Al0.06Mg0.11)Σ0.92[(As0.87V0.12P0.01)Σ1.00O4]2(OH) for lombardoite, and (Sr1.93Ca0.21Ba0.04Pb0.01)Σ2.19(Mn3+0.48Al0.35Fe3+0.21Mg0.01)Σ1.05[(As0.92V0.03)Σ0.95O4]2(OH) for aldomarinoite. The absence of H2O was confirmed by Raman spectroscopy and infrared spectroscopy. Both minerals are monoclinic, P21/m, with unit-cell parameters a = 7.8636(1) Å, b = 6.13418(1) Å, c = 9.1197(1) Å, β = 112.660(2)° and V = 405.94(1) Å3, for lombardoite and a = 7.5577(4) Å, b = 5.9978(3) Å, c = 8.7387(4) Å, β = 111.938(6)° and V = 367.43(3) Å3, for aldomarinoite. The eight strongest powder X-ray diffraction lines are [d, Å (Irel) (hkl)]: 6.985 (39) (10$\bar{1}$), 3.727 (33) (111), 3.314 (100) (21$\bar{1}$), 3.073 (24) (020), 3.036 (33) (21$\bar{2}$, 10$\bar{3}$), 2.810 (87) (12$\bar{1}$, 112), 2.125 (20) (301, 11$\bar{4}$) and 1.748 (24) (321) for lombardoite and 3.191 (89) (21$\bar{1}$), 2.997 (45) (020), 2.914 (47) (21$\bar{2}$, 10$\bar{3}$), 2.715 (100) (112), 2.087 (39) (12$\bar{3}$, 1.833 (32) (31$\bar{4}$), 1.689 (36) (321), 1.664 (21) (132) for aldomarinoite. The minerals are isostructural with brackebuschite: infinite chains of edge sharing octahedra running parallel to the b axis and decorated with AsO4 groups are connected along the a and c axes through Ba and Sr atoms in lombardoite and aldomarinoite, respectively. The minerals are named after Bruno Lombardo (1944–2014), geologist and petrologist at C.N.R. (National Research Council of Italy), and Aldo Marino (b. 1942) the mineral collector and founding member of the AMI – Italian Micromineralogical Association.

This work describes the first occurrence of albitite rocks in the Middle Triassic Verruca Formation, Monti Pisani, Northern Apennines, northern Tuscany, Italy. The albitite formed by Na-metasomatism of phyllites (‘potassic white mica' + quartz + ‘chlorite' + hematite + albite) in an amagmatic environment. The albitisation process took place after the Miocene main phases of Apenninic deformation and was followed by the formation of veins of Fe-carbonate + quartz. Hydrothermal alteration progressed with the ingression, possibly favoured by the increase of permeability due to albitisation, of a slightly acidic, oxidising, aqueous fluid that led to the pervasive kaolinisation of the albitite and to the complete transformation of the Fe-carbonate of the veins into Fe-hydroxides. This stage was followed by supergene alteration that led to the formation of a pervasive network of halloysite veinlets and colloform (P–Al–Si)-bearing Fe-hydroxides. Finally, the hydrothermally altered rock underwent a localised brittle fracturing without new minerals being formed. The prominent compositional changes occurring during this multi-stage hydrothermal process were the inversion of the Na2O/K2O ratio of the whole rock (from 0.07 in the pristine phyllite to up to 200 for the kaolinised albitite), the loss of Fe and Mg, and the enrichment of Sb. The MREE were partially lost, whereas LREE and HREE behaved conservatively. Though pervasive hydrothermal alteration occurrences are common in central-southern Tuscany, mostly related to the post-collisional extensional regime, lithospheric thinning and emplacement of magmatic bodies in the crust, the rare Monti Pisani kaolinised albitite described in this investigation expands the effects of post-collisional hydrothermal activity in Tuscany northwards, far from potential magmatic sources.

The Mineo pallasite is a relatively poorly known meteorite, which shows interesting features that are not fully understood, such as the occurrence of iron oxide regions bordering both the olivine grain boundaries and the (Fe,Ni) metal. In this study, the Fe oxides have been characterised by Raman spectroscopy, electron microprobe analysis, field emission scanning electron microscopy, transmission electron microscopy (TEM), energy dispersive spectroscopy (EDS) and 3D electron diffraction (3D ED). The combination of TEM–EDS and 3D ED yields a reliable identification of the chemical and crystallographic features of the cryptocrystalline portion of the sample investigated, enabling the Fe-oxide regions to be positively identified as goethite, FeO(OH).

The occurrence of goethite was unambiguously associated with terrestrial alteration, also confirmed by the presence of calcite, detected by TEM-EDS and 3D ED. Goethite contains minor elements such as Na, Si and Ca, probably coming from alumino-silicates in the terrestrial environment, and Ni associated with the (Fe,Ni) metal. The observation of goethite along olivine grain boundaries, as an alteration product of the (Fe,Ni) metal diagenesis, is also very intriguing as it might be related to the (Fe,Ni) metal intruded into the sub-micrometric olivine fragments during pallasite formation. Further work is needed to extensively analyse the texture and composition of olivine/metal boundaries.

Fluorsigaiite, ideally Ca2Sr3(PO4)3F, is a new Sr analogue of fluorphosphohedyphane and a new member of the apatite supergroup. It was discovered in lujavrite from the Saima alkaline complex, Liaoning Province, China. Fluorsigaiite commonly occurs as individual prismatic, columnar and platy crystals of 10 to 50 μm in size, associated with microcline, nepheline, aegirine, natrolite, eudialyte, fluorapatite, a fluorstrophite-like mineral, stronadelphite and calcite. Occasionally, crystals of fluorsigaiite form prismatic aggregates in the interstices of lujavrite. Fluorsigaiite is translucent to transparent, colourless to yellowish white with a vitreous lustre and without fluorescence. The estimated Mohs hardness is 5, and the tenacity is brittle with uneven fractures. The calculated density is 3.842 g/cm3. Optically, fluorsigaiite is uniaxial (–) with ω = 1.64(1) and ɛ = 1.63(1) in white light and without dispersion. The mean chemical composition (in wt.%) of fluorsigaiite is Na2O 0.75, CaO 15.17, SrO 44.44, La2O3 3.64, Ce2O3 2.22, Pr2O3 0.19, Nd2O3 0.13, Sm2O3 0.05, Gd2O3 0.23, P2O5 31.87, F 1.91, H2O 0.46, sum 100.26, giving the empirical formula (Sr2.82Ca1.79Na0.16La0.15Ce0.09Pr0.01Nd0.01Gd0.01)Σ5.04P2.97O12[F0.66(OH)0.34]Σ1, which is calculated on the basis of 13 total anions and F+(OH) = 1. The strongest eight lines of its powder X-ray diffraction pattern [d, Å (I, %) (hkl)] are: 3.563 (15) (002), 3.275 (15) (102), 3.144 (19) (120), 2.876 (100) (121), 2.861 (96) (112), 2.772 (27) (300), 1.991 (17) (222) and 1.895 (23) (213). Fluorsigaiite is hexagonal, in the space group P63/m and unit-cell parameters refined from single-crystal X-ray diffraction data are: a = 9.6101(2) Å, c = 7.1311(1) Å, V = 570.35(3) Å3 and Z = 2. It is isostructural with hedyphane-group minerals, and contains different prevailing (species-defining) Ca and Sr cations at the Ca1 and Ca2 sites, respectively. Fluorsigaiite was probably formed from Sr-rich fluids at late-magmatic or hydrothermal stage of the Saima lujavrite.

Two contrasting reaction coronae were developed around rare earth element (REE) accessory phosphates in Variscan metagranitic rocks, which have been overprinted by Alpine blastomylonitisation from the Fabova Hol'a Massif, in the Veporic Unit, Western Carpathians, Central Slovakia. The Th–U–Pb total EPMA age determination of primary magmatic monazite-(Ce) from the metagranite indicates a Carboniferous (Mississippian, Tournaisian) age of 355 ± 1.9 Ma. Monazite-(Ce) breakdown resulted in impressive, though common, fluorapatite ± Th-silicate + allanite-(Ce) + clinozoisite coronae. The alteration of xenotime-(Y) produced a novel type of secondary coronal micro-texture consisting of a massive fluorapatite mantle zone and tiny satellite crystals of hellandite-(Y) [(Ca,REE)4Y2Al□2(B4Si4O22)(OH)2] and hingganite-(Y) [Y2□Be2Si2O8(OH)2] of ~1–5 μm, and rarely ≤10 μm in size. The localised occurrence of Y–B–Be silicates, which are associated closely with other secondary minerals, suggests the involvement of B and Be during the metasomatic alteration transformation of xenotime-(Y). General reactions for monazite-(Ce) and xenotime-(Y) decomposition, including the fluids involved, can be written as follows: Mnz + (Ca, Fe, Si, Al and F)-rich fluid → FAp + Ht + Aln + Czo; Xtm + (Ca, Fe, Si, Al, F, B and Be)-rich fluid → FAp + Hld + Hin + Czo.

The granitic rocks underwent Early Cretaceous burial metamorphism under greenschist- to lower amphibolite-facies P–T conditions. Subsequently, Alpine post-collisional uplift and exhumation of the Veporic Unit, starting from the Late Cretaceous epoch, was accompanied by a retrograde tectono-metamorphic overprint; the activity of external fluids, caused the formation of secondary coronae minerals around monazite-(Ce) and xenotime-(Y). A portion of B (± Be) should have been liberated from the metagranite feldspars, micas, or xenotime-(Y) enriched in (Nb,Ta)BO4 (schiavinatoite or béhierite) components. However, the principal source of B and Be in fluids necessary for the production of hellandite and hingganite, was probably of external origin from adjacent magmatic, metamorphic, or sedimentary rocks (Permian granites, rhyolites and sedimentary rocks, and Palaeozoic metapelites).

The new alluaudite-group mineral paraberzeliite was found in the Arsenatnaya fumarole, Second scoria cone of the Northern Breakthrough of the Great Tolbachik Fissure Eruption, Tolbachik volcano, Kamchatka, Russia. In the deepest zone of Arsenatnaya, paraberzeliite (holotype) is associated with anhydrite, diopside, hematite, svabite, berzeliite, schäferite, calciojohillerite, magnesioferrite, ludwigite, fluorapatite, powellite, baryte, and rhabdoborite-group and aphthitalite-group members. In the middle zone of the fumarole, paraberzeliite occurs with hematite, calciojohillerite, badalovite, johillerite, nickenichite, tilasite, svabite, fluorophlogopite, sanidine, cassiterite, anhydrite, metathénardite and belomarinaite. Paraberzeliite forms prismatic crystals up to 0.2 mm × 0.2 mm × 1 mm often occurring in open-work aggregates. It is transparent, brown (from light to dark brown, sometimes with purple or red hue) or green (from pale greenish to yellow–green). The mineral is brittle, cleavage was not observed. The Mohs hardness is 3½. Dcalc is 3.811 g cm–3. Paraberzeliite is optically biaxial (+), α = 1.718(4), β = 1.728(4), γ = 1.742(4) and 2Vmeas. = 85(5)°. The chemical composition (wt.%, electron-microprobe; holotype) is: Na2O 6.43, CaO 16.65, MgO 11.64, MnO 1.65, CuO 0.06, Fe2O3 2.45, V2O5 1.10, As2O5 59.46, total 99.44. The calculated empirical formula based on 12 O atoms per formula unit is (Na1.20Ca1.71Mg1.66Mn0.13Fe3+0.18)Σ4.88(As2.98V0.07)Σ3.05O12. Paraberzeliite is monoclinic, C2/c, a = 12.3143(7), b = 13.0679(5), c = 6.7717(4) Å, β = 113.657(7)°, V = 998.14(10) Å3 and Z = 4. The crystal structure was solved from single-crystal X-ray diffraction data, R = 0.0349. Paraberzeliite is isostructural with other alluaudite-group minerals. Its simplified crystal chemical formula is A(1)CaA(2)'NaM(1)CaM(2)Mg2(TAsO4)3. The idealised formula is NaCa2Mg2(AsO4)3, or, according to the actual nomenclature of alluaudite-group arsenates, NaCaCaMg2(AsO4)3. The name paraberzeliite reflects the dimorphism of this alluaudite-group mineral with the arsenate garnet berzeliite, ideally (Ca2Na)Mg2(AsO4)3.

The Marepalli dyke of the Vattikod cluster of the Ramadugu Lamproite Field, Nalgonda district, Telangana, India consists of pseudomorphed leucite, phlogopite (Al-poor, Ti-rich zoned phlogopite micas), pseudomorphed olivine, fluorapatite and Al-poor diopside embedded in groundmass consisting mainly of poikilitic Fe-rich titanian phlogopite and potassic amphibole. Other groundmass minerals are Al-Na-poor diopside, Al-poor spinels (titanian magnesian chromites to titanian chromites), Sr-rich fluorapatite and late-stage interstitial anhedral crystals of titanite and K-feldspar. The late-stage deuteric minerals present are REE-rich allanite, pyrite, magnetite, chalcopyrite, galena, hydro-zircon, carbonates (calcite, witherite and strontianite), baryte and cryptocrystalline SiO2. Apatite is an early crystallising phase and is present as inclusions in phlogopite and pyroxene. Phlogopite and amphibole occur as inclusions in titanite and K-feldspar. The compositional trends of phlogopite are of almost constant Al2O3 content with FeOT and TiO2 enrichment, and are typical of lamproitic micas. The FeOT enrichment is accompanied additionally by MgO depletion (reflecting VIFe2+ enrichment) from core to rim together with a slight increase in the tetraferric iron component. Diopside is characterised by <0.4 wt.% alumina and <0.6 wt.% sodium contents and exhibits typical lamproitic affinity. The spinels are alumina-poor with un-evolved titanian magnesian chromite to titanian chromite compositions. The presence of K-richterite, as an abundant amphibole, indicates a lamproite affinity, and on the basis of the typomorphic mineralogy, this rock is classified as a ‘pseudoleucite-amphibole-phlogopite lamproite’. The Marepalli lamproite shows significant difference in compositional ranges of phlogopite, amphibole, pyroxene and spinel in comparison to those reported from the Vattikod, Gundrapalli, Ramadugu, Somavarigudem and Yacharam lamproites of Ramadugu Lamproite Field. These lamproites are considered to form from a common parent magma under reducing conditions as evidenced from: (1) low tetraferric iron content in phlogopite; (2) low Fe3+# and Ti# in spinels; and (3) high F content in phlogopite and apatite.

Black tourmalines from seven granitic pegmatites (Golodnaya, Kazennitsa, Mokrusha, Kopi Mora, Zheltyye Yamy, Buzheninov Bor and Ministerskaya) related to the Murzinka pluton, Central Urals, Russia have been investigated using electron microprobe analysis, LA-ICP-MS, Raman and Mössbauer spectroscopy. Pegmatites are hosted by serpentinites and gneisses and are classified as schorl, oxy-schorl, fluor-schorl, dravite, oxy-dravite, foitite, oxy-foitite and darrellhenryite. The possible compositional evolution of tourmalines from the Ural pegmatites is as follows: Mg-rich dravite through to Fe-rich schorl, foitite and oxy-foitite to Fe- and Mn-rich darrellhenryite. The major substitutions in the tourmalines are: (1) Fe2+ ↔ Mg; (2) Al + WO2– ↔ Fe2+ + WOH–; (3) X-site vacancy + Al ↔ Na + Fe2+; (4) Al + WO2– ↔ Mg + WOH–; (5) X-site vacancy + Al ↔ Na + Mg; and (6) Fe ↔ Mn. Statical processing of the trace- and major-element composition distinguished three tourmaline groups: (1) trace Co, Ni, Pb, and major Ca and Mg; (2) uni-, di- and trivalent traces (Li, Zn, Ga) and di- and trivalent majors (Al, Mn); (3) U, Th, Hf, Ta, Nb, Y, In, and Sn which correspond to tri-, tetra-, and pentavalent high-field-strength elements. Mössbauer data shows the Fe3+/Fe2+ ratios in tourmalines from pegmatites hosted by gneisses (0.05–0.18) and serpentinites (0.28–0.65), indicates different oxidising environments. Raman data are consistent with the composition of the tourmalines.

The Wombat Hole Prospect is a small copper–bismuth–(tellurium) exoskarn cropping out in the Morass Creek gorge, near Benambra, in eastern Victoria, Australia. Its main primary sulfide constituent is bornite in a grossular‒vesuvianite matrix. The skarn formed in a megaclast of Lower Silurian limestone from metal-bearing fluids accompanying the high-level emplacement of the Late Silurian–Lower Devonian Silver Flat Porphyry. Though the primary bornite mineralisation has been nearly obliterated by weathering, there are small relict patches containing exsolved grains of wittichenite (Cu3BiS3) and chalcopyrite, as well as inclusions of bismuth tellurides in the tetradymite group, namely sulphotsumoite (Bi3Te2S) and hedleyite (Bi7Te3). Joséite-A (Bi4TeS2), a mineral with a formula Bi3(Te,S)4, several unnamed Cu–Bi‒Te phases and minute grains of native bismuth have also been detected. Pervasive veining by chrysocolla throughout the garnet‒vesuvianite host contains a range of unusual secondary bismuth minerals that have crystallised at various times. These include mrázekite, namibite, pucherite, schumacherite and eulytine. Other secondary minerals present include wulfenite, bismutite, azurite, malachite and a poorly-crystalline bismuth oxide containing several weight percent tellurium. Rare grains of gold (electrum) containing up to 23 wt.% Ag are also present. The assemblage of grossular–vesuvianite with minor diopside is indicative of formation in a low-${\rm X}_{{\rm C}{\rm O}_ 2}$ environment under fluid-buffered conditions. A temperature range between ~650°C and as low as ~150°C can be estimated from the exsolution of wittichenite and chalcopyrite from the bornite. The tetradymite-group inclusions formed first under low values of $f_{{\rm S}_ 2}$ /$f_{{\rm T}{\rm e}_ 2}$, with bornite crystallising as values increased. The primary Cu‒Bi‒Te mineralogy and the unusual secondary mineral assemblage makes the Wombat Hole skarn unique in southeastern Australia. The deposit provides scope for studying the mobility of elements such as Bi and Te over short distances during weathering of hypogene ore minerals.

The Mount Mather Creek sodalite-bearing carbohydrothermal breccia dyke is located ~35 km northwest of Golden, British Columbia, Canada, within the Foreland Belt on the eastern side of the Mississippian-to-Devonian British Columbia Alkaline Province. The dyke occurs in situ on the western side of the Mount Mather Creek gully, cropping out over a distance of ~80 m with a thickness of up to 10 m, intruding a syncline of Middle and Upper Cambrian Chancellor Group carbonate rocks. To date, no parental alkaline complex has been found adjacent or proximal to the dyke. The breccia dyke is flow-banded and matrix-supported and consists of host rock clasts, medium- to coarse-grained, anhedral-to-poikilitic carbonate-rich syenite segregations that occur as veins and pods, and fine-grained banded sodalite plus carbonate fragments in a carbonate-rich matrix. The sodalite-carbonate segregations consist dominantly of sodalite, ferroan dolomite, calcite and microcline, with an extensive suite of trace minerals enriched in rare earth elements (REE), Na, Ba and Sr, including albite, analcime, ancylite-(Ce), chabazite-Na, fluorapatite, baryte, barytocalcite, cancrinite, galena, goethite, gonnardite, harmotome, edingtonite, a potentially new Mg-bearing edingtonite-like mineral, natrolite, nordstrandite, pyrite, quintinite and sphalerite. Alteration of the primary silicate–carbonate assemblage has resulted in a secondary assemblage of hydrothermal or carbohydrothermal REE–Ba–Sr–Na phases including albite, analcime, cancrinite, gonnardite and nordstrandite after sodalite, together with complex intergrowths of ancylite-(Ce), barytocalcite, edingtonite, and a potentially-new Mg-bearing edingtonite-like mineral. Remobilisation of Ba and Sr from barytocalcite resulted in crystallisation of late-stage baryte and Sr-rich calcite. Mount Mather Creek is only the fifth Canadian occurrence of the Ba-zeolite, edingtonite, and the second Canadian occurrence of the rare layered double hydroxide quintinite. The Mount Mather Creek breccia is a carbohydrothermal deposit, the product of a low temperature (<450°C), highly evolved, alkaline, SiO2-undersaturated, Na–Ba–REE–Cl-rich, residual carbonated silicate melt whose parental origins remain unknown.

Medvedevite, KMn2+V5+2O6Cl⋅2H2O, is a new mineral discovered in the Toludskoe lava field, formed during the 2012–2013 Tolbachik fissure eruption. The mineral occurs as thin acicular transparent bright red crystals up to 0.15 mm. Medvedevite is associated with thénardite, halite, aphthitalite, leonite, kieserite, eugsterite and syngenite. The empirical formula calculated on the basis of 13+ positive charge units for the anhydrous part and 2H2O is (K1.02Na0.03)Σ1.05Mn2+0.95(V5+1.92S6+0.05Si0.04)Σ2.01O6.02Cl0.96⋅2H2O. The crystal structure of medvedevite was determined using single-crystal X-ray diffraction data: monoclinic crystal system, the space group is P21/c, a = 7.1863(2), b = 10.1147(3), c = 12.7252(4) Å, β = 106.243(3)°, V = 888.04(5) Å3, Z = 4 and R1 = 0.029. The concept of ‘structural unit’ and ‘interstitial complex’ could be applied to the crystal structure of medvedevite. The structural units in medvedevite are based on the high bond-valence V5+O5 polyhedra which share edges and link into [V2O6] chains elongated along the a axis. The interstitial complexes consist of Mn2+, K+ cations and H2O groups and occupy the interstices between structural units. The mineral is optically biaxial (+), with α =1.782(2), β = 1.786(2), γ = 1.792(2), 2V(calc) = 41° (λ = 589 nm). The seven strongest lines of the powder XRD pattern are [d, Å (I, %) (hkl)]: 7.79(100)(011); 5.70(11)(110); 4.75(14)(11$\bar{2}$); 3.89(29)(022); 3.25(53)(031); 2.958(79)(21$\bar{3}$); and 2.850(33)(220). The mineral has been named in honour of the Russian geologist and chemist Robert Alexandrovich Medvedev (1939–2005).

The diffusivity and diffusion mechanisms of hydrogen together with with deuterium and lithium, parallel to the c axis of quartz, were investigated experimentally at 800°C, 0.1 GPa with the activity of H2O or 2H2O ≈ 1 [2H is used throughout this work to describe deuterium rather than D, to avoid confusion with the diffusion coefficient, D]. The pH was set using mixtures of H2O (or 2H2O) and HCl. Three types of experiment were conducted: (1) H-in/Li-out; (2) 2H-in/H-out; and (3) 2H-in/H + Li out, using three different natural quartz crystals as starting materials. Profiles of H, 2H and Li were measured using Fourier-transform infrared (FTIR) spectroscopy and laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS). H, 2H and Li are charge-compensated by Al3+ replacing Si4+, or by excess O2–. The total atomic concentration of monovalent cations appears to remain constant over the duration of the experiments. The resulting diffusion profiles are different for the three experimental designs and three starting materials, and some show complex shapes inconsistent with simple diffusion. A multi-site diffusion–reaction model is developed, with the theory based on previous models that have been derived mainly on the basis of conductivity measurements. In these models, the monovalent cations move away from their charge-balancing ion then diffuse rapidly to another site. The mobility of the monovalent cations is described by both a diffusion coefficient and an equilibrium constant that enables dissociation of the immobile charge-balanced defects. This model can describe complex step-shaped profiles formed in H-in/Li-out experiments, profiles with local maxima ('humped’ profiles) in 2H-in/H + Li out experiments, and error function-shaped profiles in 2H-in/H-out and previously published Li-in/H-out experiments. Our data provide support for models previously proposed for quartz. Studies of the lengths and forms of diffusion profiles from such experiments provide a useful complement to assertions from conductivity experiments.

Saccoite, Ca2Mn3+2F(OH)8⋅0.5(SO4), is a new mineral found at the N'Chwaning III mine, Kalahari Manganese Field, Northern Cape Province, Republic of South Africa. It occurs as fillings of voids in hydrothermally altered manganese ore (comprising mostly of bixbyite and baryte). Further associated minor minerals are braunite, gypsum, chlorite, sturmanite and ettringite. Saccoite forms small needles, felted crystal masses or crusts. The new mineral is olive green, transparent, with white streak and vitreous lustre. No luminescence is observed. Saccoite is uniaxial (–) with refractive indices at 589(1) nm of ω = 1.705(5) and ɛ = 1.684(2). Pleochroism is distinct, i.e. bluish green (ω) and yellowish green (ɛ). The chemical composition was studied by means of an electron probe micro-analyser (EPMA) using wavelength-dispersive X-ray spectrometry (WDS). The empirical mineral formula is Ca2.06Mn3+1.78Cu0.10Mg0.07F0.97(OH)8.02(SO4)0.39. The unit-cell dimensions of saccoite (space group P4/ncc) are a = 12.834(3) Å, c = 5.622(2) Å, V = 926.0(4) Å3), and the calculated mass density is 2.73 g⋅cm–3. Saccoite exhibits a heteropolyhedral framework structure that is composed of edge- and corner sharing CaF2(OH)6 and M(OH)6 polyhedra (M = Mn3+ and Cu2+) with large channels along [001], which host disordered and only partially occupied groups, especially SO42–. The hydrogen atoms of the OH groups point into the channel to form hydrogen bonds with the channel anions. Ca–F distances are ~2.3 Å, the Ca–OH distances in the range of 2.44–2.58 Ǻ, and the M(OH)6 octahedron is strongly 4+2 Jahn-Teller distorted (4 × ~1.92 Å, 2 × 2.27 Å). The F atom is tetrahedrally coordinated to calcium atoms. The strongest lines in the powder X-ray diffraction pattern [d in Å (relative intensity) (hkl)] are: 9.0735 (35) (110), 4.5370 (95) (220), 4.0644 (20) (310), 3.0105 (100) (321), 2.8117 (20) (002), 2.7242 (75) (411), 1.9755 (35) (611), and 1.8142 (20) (550).