The distribution of boron in tissue samples coming from boron neutron capture therapy protocols can be determined through the analysis of its autoradiography image on a nuclear track detector. A more precise knowledge of boron atom location on the microscopic scale can be attained by the observation of nuclear tracks superimposed on the sample image on the detector. A method to produce an “imprint” of cells cultivated on a polycarbonate detector was developed, based on the photodegradation properties of UV-C radiation on this material. Optimal conditions to generate an appropriate monolayer of Mel-J cells incubated with boronophenylalanine were found. The best images of both cells and nuclear tracks were obtained for a neutron fluence of 1013 cm−2, 6 h UV-C (254 nm) exposure, and 4 min etching time with a KOH solution. The imprint morphology was analyzed by both light and scanning electron microscopy. Similar samples, exposed to UV-A (360 nm) revealed no cellular imprinting. Etch pits were present only inside the cell imprints, indicating a preferential boron uptake (about threefold the incubation concentration). Comparative studies of boron absorption in different cell lines and in vitro evaluation of the effect of diverse boron compounds are feasible with this methodology.

The 50th anniversary of the application of electron probe microanalysis (EPMA) to the Earth Sciences provides an opportunity for an assessment of the state-of-the-art of the technique. Stemming from the introduction of the first automated instruments, the latest developments of EPMA and some typical applications are reviewed with an eye to the future. The most noticeable recent technical achievements such as the field-emission electron gun, the latest generation of energy and wavelength dispersive spectrometers, and the development of analytical methods based on new sets of first principle data obtained by the use of sophisticated computer codes, allow for the extension of the method to the analysis of trace elements, ultra-light elements (down to Li), small particles, and thin films, with a high degree of accuracy and precision and within a considerably reduced volume of interaction. A number of working examples and a thorough list of references provide the reader with a working knowledge of the capabilities and limitations of EPMA today.

Irradiation damage, caused by the use of beams in electron and ion microscopes, leads to undesired physical/chemical material property changes or uncontrollable modification of structures. Particularly, soft matter such as polymers or biological materials is highly susceptible and very much prone to react on electron/ion beam irradiation. Nevertheless, it is possible to turn degradation-dependent physical/chemical changes from negative to positive use when materials are intentionally exposed to beams. Especially, controllable surface modification allows tuning of surface properties for targeted purposes and thus provides the use of ultimate materials and their systems at the micro/nanoscale for creating functional surfaces. In this work, XeF2 and I2 gases were used in the focused ion beam scanning electron microscope instrument in combination with gallium ion etching of high-density polyethylene surfaces with different beam currents and accordingly different gas exposure times resulting at the same ion dose to optimize and develop new polymer surface properties and to create functional polymer surfaces. Alterations in the surface morphologies and surface chemistry due to gas-assisted etching-based nanostructuring with various processing parameters were tracked using high-resolution SEM imaging, complementary energy-dispersive spectroscopic analyses, and atomic force microscopic investigations.

Transmission electron backscatter diffraction (t-EBSD) was used to investigate the effect of dealloying on the microstructure of 140-nm thin gold foils. Statistical and local comparisons of the microstructure between the nonetched and nanoporous gold foils were made. Analyses of crystallographic texture, misorientation distribution, and grain structure clearly prove that during the dealloying manufacturing process of nanoporous materials the crystallographic texture is enhanced significantly with a clear decrease of internal strain, whereas maintaining the grain structure.

A novel nano-scale manipulator capable of handling low-dimensional materials with three-dimensional linear motion, gripping action, and push–pull action of the gripper was developed for an in situ experiment in transmission electron microscopy. X-Y-Z positioning and push–pull action were accomplished by a piezotubing system, combined with a specially designed assembly stage that consisted of a lever-action gripping tip backed by a push–pull piezostack. The gripper tip consisted of tungsten wire fabricated by electrochemical etching followed by a focused ion beam process. Performance of the nano-scale manipulator was demonstrated in a grab-and-pick test of a single silver nanowire and in an in situ tensile test of a pearlitic steel sample with a specific orientation.

The artwork “Smoke Rings: Two Concentric Tunnels, Non-Communicating” by Bruce Nauman represents a case study of corrosion of a black patina-coated Al-alloy contemporary artwork. The main concern over this artwork was the widespread presence of white spots on its surface. Alloy substrate, patina, and white spots were characterized by means of energy-dispersive X-ray fluorescence and scanning electron microscopy with energy-dispersive spectroscopy. Alloy substrate was identified as an aluminum alloy 6,000 series Al–Si–Mg. Patina’s identified composition confirmed the documentation provided by the atelier. Concerning the white spots, zircon particles were found on patina surface as external elements.

When bone is exposed to the burial environment it may experience structural changes induced by multiple agents. The study of postmortem alterations is important to differentiate decomposition phenomena from normal physiological processes or pathological lesions, as well as to assess bone tissue quality. Microscopy is of great utility to evaluate the integrity of bone microstructure and it provides significant data on long-term bone decomposition. A total of 18 human bone sections (eight archeological and ten retrieved from an identified skeletal collection) were selected for analysis under plane light and polarized light. The aim of this exploratory study was to analyze the impact of diagenesis and taphonomy on the bone microstructure, as well as on the differential diagnosis of pathological conditions. The results showed that the microscopy approach to bone tissues contributed materially as an aid in the detailed description of the main diagenetic changes observed. It showed that gross inspection does not provide a realistic assessment of bone tissue preservation, which can impact in the characterization of lesions present and subsequent disease diagnosis. Therefore, researchers should continue to consider the application of histological techniques if the aim is to comprehend tissue integrity and its association with decomposition or disease.

A method to characterize open-cell nanoporous materials with atom probe tomography (APT) has been developed. For this, open-cell nanoporous gold with pore diameters of around 50 nm was used as a model system, and filled by electron beam-induced deposition (EBID) to obtain a compact material. Two different EBID precursors were successfully tested—dicobalt octacarbonyl [Co2(CO)8] and diiron nonacarbonyl [Fe2(CO)9]. Penetration and filling depth are sufficient for focused ion beam-based APT sample preparation. With this approach, stable APT analysis of the nanoporous material can be performed. Reconstruction reveals the composition of the deposited precursor and the nanoporous material, as well as chemical information of the interfaces between them. Thus, it is shown that, using an appropriate EBID process, local chemical information in three dimensions with sub-nanometer resolution can be obtained from nanoporous materials using APT.

One grain, about 100×80 μm in size, occurring in chromitite associated with the layered sequence of the Nurali mafic-ultramafic complex (Southern Urals, Russia) was investigated by electron-microprobe analyses and Raman spectroscopy. The grain is characterized by a spotty, rugged appearance and chemical zoning from which two compositions were calculated: (Pt0.35Pd0.26Fe0.22Cu0.01Ni0.05)0.98O1.02 and (Fe0.90Pt0.58Ni0.28Pd0.13Cu0.08Rh0.01)1.98O1.02. In the lack of X-ray data, Raman spectroscopy established the presence of a diffuse 500–700 band and a sharp peak at 657 cm−1 of relative wavenumber that strongly resemble the Raman spectra of synthetic PtO and PdO (palladinite). It is concluded that the Nurali grain probably represents a platinum group element (PGE) oxide, and does not consist of a mixture of PGE alloys with Fe oxide or hydroxide as reported for other natural PGE-O compounds.