This paper presents the results of numerical investigations into the acceleration of heavy ions by a multi-PW laser pulse of ultra-relativistic intensity, to be available with the Extreme Light Infrastructure lasers currently being built in Europe. In the numerical simulations, performed with the use of a multi-dimensional (2D3V) particle-in-cell code, the thorium target with a thickness of 50 or 200 nm was irradiated by a circularly polarized 20 fs laser pulse with an energy of ~150 J and an intensity of 1023 W/cm2. It was found that the detailed run of the ion acceleration process depends on the target thickness, though in both considered cases the radiation pressure acceleration (RPA) stage of ion acceleration is followed by a sheath acceleration stage, with a significant role in the post-RPA stage being played by the ballistic movement of ions. This hybrid acceleration mechanism leads to the production of an ultra-short (sub-picosecond) multi-GeV ion beam with a wide energy spectrum and an extremely high intensity (>1021 W/cm2) and ion fluence (>1017 cm−2). Heavy ion beams of such extreme parameters are hardly achievable in conventional RF-driven ion accelerators, so they could open the avenues to new areas of research in nuclear and high energy density physics, and possibly in other scientific domains.

In this work, a comparative study of low-temperature plasmas, induced in a gaseous nitrogen by photoionization of the gas using two different irradiation systems, was performed. Both systems were based on laser-produced Xe plasmas, emitting intense extreme ultraviolet (EUV) radiation pulses in a wide wavelength range. The essential difference between the systems concerned formation of the EUV beam. The first one utilized a dedicated ellipsoidal mirror for collecting and focusing of the EUV radiation. This way a high radiation fluence could be obtained for ionization of the N2 gas injected into the vacuum chamber. The second system did not contain any EUV collector. In this case, the nitrogen to be ionized was injected into the vicinity of the Xe plasma. In both cases, energies of emitted photons were sufficient for dissociative ionization, ionization of atoms or even ions. The resulting photoelectrons had also sufficiently high energy for further ionizations or excitations. Low-temperature plasmas, created this way, were investigated by spectral measurements in the EUV, ultraviolet (UV) and visible (VIS) spectral ranges. Time-resolved UV/VIS spectra, corresponding to single-charged ions, molecules, and molecular ions, were recorded. Numerical simulations of the molecular spectra were performed allowing one to estimate vibrational and rotational temperatures of plasmas created using both irradiation systems.

We propose a scheme for terahertz (THz) radiation generation by non-linear mixing of two cosh-Gaussian laser beams in axially magnetized plasma with spatially periodic density ripple where electron-neutral collisions have been taken into account. The laser beams exert a non-linear ponderomotive force due to spatial non-uniformity in the intensity. The plasma electrons acquire non-linear oscillatory velocity under the influence of ponderomotive force. This oscillatory velocity couples with preformed density ripples (n′ = n0αeiαz) to generate a strong transient non-linear current that resonantly derives THz radiation of frequency ~ωh (upper hybrid frequency). Laser frequencies (ω1 and ω2) are chosen such that the beat frequency (ω) lies in the THz region. The periodicity of density ripple provides phase-matching conditions (ω = ω1 − ω2 and $\vec k = \vec k_1 - \vec k_2 + {\rm \vec \alpha} $) to transfer maximum momentum from laser to THz radiation. The axially applied external magnetic field can be utilized to enhance the non-linear coupling and control various parameters of generated THz wave. The effects of decentered parameters (b), collisional frequency (νen), and magnetic field strength (B0 = ωcm/e) are analyzed for strong THz radiation generation. Analytical results show that the amplitude of THz wave enhances with decentered parameters as well as with the magnitude of axially applied magnetic field. The THz amplitude is found to be highly sensitive to collision frequency.

Enhanced harmonic generation of second order based on exponential density ramp in plasma has been noticed. It is well known that self-focusing of pump laser induces a transverse intensity gradient, which gives rise to the plasma wave at the pump frequency. Highly intense Gaussian laser with exponential density ramp profile generates a second harmonic pulse in plasma. It is noticed that the amplitude of second-harmonic pulse varies periodically with the distance and reaches its peak value in the focal region. Further, it is found that exponential plasma density ramp is useful for stronger self-focusing, which lead to rise second harmonic generation (SHG). Wiggler magnetic field provides the additional angular momentum required for second harmonic photon and aids in growing of resonant process. One may clearly see that exponential plasma density ramp imparts a major role in enhancing the SHG in plasma. Further, the combined effect of exponential density ramp and wiggler magnetic field boosts the SHG in plasma.

A nonparaxial investigation for propagation characteristics of q-Gaussian laser beam in rippled density plasma is studied by considering the relativistic nonlinearity. The field distribution in the medium is expressed in terms of q parameter and beam width parameter f. Nonlinear parabolic partial differential equation governing the evolution of complex envelope in slowly varying approximation is solved in a modulated density profile. Analytical theory of self-focusing including higher order terms in the expansion of dielectric function up to fourth order is developed and the variation of beam width parameter f with the distance of propagation for different parameters is studied. One may note that increased value of density ripple, laser intensity and depth of modulation, increases self-focusing whereas a lower value of q shows strong self-focusing. A comparative study between paraxial and nonparaxial study has also conducted. This study is useful for research in high energy density physics.

Monolithic large-aperture diffraction grating tiling is desired to increase the output capability of multi-kilojoule petawatt laser facilities. However, the wavefront errors of input pulse and gratings will degrade the focal spot quality and the compressibility of the output pulse. In this work, the effects of wavefront error of input pulse, deformation and wave aberration of the grating for the large-aperture tiled-grating compressor are investigated theoretically. A series of numerical simulations are presented to discuss the changing trends of focal spot energy caused by wavefront error of input pulse and obtain the error tolerance for specific goals. The influences of coating stress and the wave aberration of holographic exposure gratings on the diffraction wavefront are also discussed. Some advice is proposed for improving the performance of large-aperture tiled-grating. This work paves the way for the design of practical large-aperture tiled-grating compressor for ultrahigh intensity laser facilities in the future.

Measurement of runaway electron beam (REB) is essential to investigate behavior of runaway electrons produced in nanosecond-pulse gas discharge. A Faraday cup is designed to measure the REB current in nanosecond-pulse discharge when the applied dV/dt is 75 kV/ns. The Faraday cup considers the impendence match with the oscilloscope and the design of the receiving part. The experimental results show that the measured REB current has a rise time of 348 ps and a full width at half maximum of 510 ps. The comparison of the measurement results by the Faraday cup and a REB collector confirm that the Faraday cup is able to measure REB current in nanosecond-pulse discharge. Furthermore, consecutive waveforms of the REB currents show stable results by using the designed Faraday cup. In addition, effects of the interelectrode gap, gas pressure, and cathode material on the REB current are investigated by the designed Faraday cup, and the measurement results provide characteristics of REB current under different conditions. The REB current decreases when the gap spacing or gas pressure increases. REB current increases with the cathode diameter. It indicates that the high-energy electrons are generated not only at the edge of the cathode but also on the side surface of the cathode.

Effects of external static magnetic field (applied in $\hat y$-direction) on resonant excitation of surface plasma waves (SPW) have been investigated over the metal free space interface. The high power laser $({\rm \omega} _0,\;\vec k_{0z})$ is incident over the metal surface and exerts a ponderomotive force on the metal electrons in the skin layer. The ponderomotive force disturbs the quasi-neutrality of plasma which results into the excitation of space charge field at the frequency 2ω0. The electron density perturbation at frequency 2ω0 driven by self-consistent space charge potential couples with the oscillatory velocity due to the seed SPW $({\rm \omega}, \;\vec k_z)$ and produces nonlinear current to drive another counter propagating SPW $({\rm \omega} _1,\;\vec k_{1z})$ at the phase matching conditions of frequency ω = ω1 − 2ω0 and wavenumber $\vec k_z = \vec k_{1z} - 2\vec k{}_{0z}$ (by feedback mechanism). The parametric process becomes resonant at 2ω0 ≈ ωp and the maximum growth rate is achieved for an incidence angle of laser θ = 40°. The growth rate of the process reduces to half on increasing the magnetic field from 0.49 to 2.45 MG. The present study may be significant to the laser absorption experiments where surface rippling can strongly affect the laser energy absorption.

The paper gives graphical and analytical investigation of the effect of critical beam power on self-focusing of cosh-Gaussian laser beams in collisionless magnetized plasma under ponderomotive non-linearity. The standard Akhmanov's parabolic equation approach under Wentzel–Kramers–Brillouin (WKB) and paraxial approximations is employed to investigate the propagation of cosh-Gaussian laser beams in collisionless magnetized plasma. Especially, the concept of numerical intervals and turning points of critical beam power has evolved through graphical analysis of beam-width parameter differential equation of cosh-Gaussian laser beams. The results are discussed in the light of numerical intervals and turning points.

Oscillating two-stream instability (OTSI) of a high amplitude laser or a plasma wave is investigated in plasmas with strongly coupled ions. It is shown that in some parameter regime, the pressure of strongly coupled ions becomes negative, which leads to enhance the bunching of ion and concomitant destabilization of OTSI. Applications of these results to ion accelerator and inertial confinement fusion experiments are discussed.

This paper reports the measurement of the energy loss of protons at the energy of 100 keV penetrating a partially ionized hydrogen plasma. The plasma of ne ≈ 1015–16 cm−3; Te ≈ 1–2 eV and lifetime of about 8 µs is created by the hydrogen gas discharge. The experimental results show an increase of a factor of 2.8 in the energy loss, which are in good agreement with the Bethe, Standard Stopping Model, Li–Petrasso and Vlasov models’ predictions within the error limit. The Bethe–Bloch Coulomb logarithm term is found to increase by a factor of 4.0 for free electrons as compared with the situation where bound electrons prevail. The potential application of protons energy loss for diagnosing the electron density in plasma is proposed too.

The collimated electron jets ejected from cylindrical plasma are produced in particle-in-cell simulation under the applied longitudinal magnetostatic field and radial electrostatic field, which is a process that can be conveniently performed in a laboratory. We find that the applied magnetostatic field contributes significantly to the jet collimation, whereas the applied electrostatic field plays a vital role in the jet formation. The generation mechanism of collimated jets can be well understood through energy gain of the tagged electrons, and we conclude that the longitudinal momentum of the electrons is converted from the transverse momentum via the transverse-induced magnetic field. It has been found that the ejecting velocity of the jets is close to the speed of light when the applied electrostatic field reaches 3 × 1010 V/m. The present scheme may also give us an insight into the formation of astrophysical jets in celestial bodies.

The effect of magnetic field on the plasma parameters and surface modification of Cu-alloy has been investigated. For this purpose, we have employed Nd: YAG laser at various irradiances ranging from 1.9 to 5 GW/cm2 to irradiate Cu-alloy under 5 torr pressure of argon, neon, and helium. The evaluated values of excitation temperature (Texc) and electron number density (ne) of Cu-alloy plasma explored by laser-induced breakdown spectroscopy technique are higher in the presence of 1.1 Tesla magnetic field as compared with field-free case. It is true at all irradiances as well as under all environmental conditions. It is also found that trends of both Texc and ne are increasing with increasing laser irradiance from 1.9 to 4.4 GW/cm2. For the highest used irradiance 5 GW/cm2, the decrease in both parameters is observed. The analytically calculated values of thermal beta, directional beta, confinement radius, and diffusion time for laser-irradiated Cu-alloy plasma confirm the validity of magnetic confinement. Scanning electron microscope analysis is utilized to study the surface modifications of laser-irradiated Cu samples and reveals the formation of islands, craters, cones, and droplets. The finer-scale surface structures are grown in case of magnetic. It is also revealed Texc and ne play a substantial part in the growth of surface structures on Cu-alloy.

The Institute of Plasma Physics and Laser Microfusion's (IPPLM) Hall effect thruster (Krypton Large IMpulse Thruster, KLIMT) is a 500 W class plasma engine with a mean diameter of discharge channel of 42 mm. KLIMT was developed within ESA/PECS project aiming to provide relatively small thruster for satellites that would be able to effectively operate with krypton propellant. Being several times less expensive than xenon, which is regarded as a propellant of choice for electric propulsion of electrostatic type, krypton since years has been suggested as an attractive alternative. In this paper, a design as well as performance tests of the laboratory model of KLIMT are discussed. It is shown that precise adjustment of magnetic field topography results in the stable operation of the thruster in wide range of operating conditions providing similar thrust and specific impulse production for both propellants. Maximum thrust produced with the use of xenon and krypton reached about 16–17 mN for mass flow rate of 1.15–1.2 mg/s resulting in specific impulse in the range of 1300–1500 s (13–15 km/s). However, for krypton the anode efficiency drops by ~10% in comparison with xenon. For krypton plasma beam divergence as measured by an average half-angle with respect to the beam axis was found to remain within the range of 19–23° for the whole set of the examined operating conditions. The reported characteristics are reasonable for Hall thruster of the discussed size and power.

High-intensity femtosecond laser–plasma interaction experiments were performed to investigate laser–plasma wakefield acceleration in the “bubble” regime. Using a 15 TW laser pulse, the emission of side-scattered radiation was spectrally and spatially resolved and was consequently used to diagnose the evolution of the laser pulse during the acceleration process. Side-scattered emission was observed immediately before wavebreaking at a frequency of ωL + 1.7ωp (where ωL is the laser frequency and ωp is the background plasma frequency). This emission may result from scattering of laser light by large amplitude plasma oscillations generated in the shell of the wakefield “bubble” and which occurs immediately prior to the wavebreaking/injection process. The observed variation of the frequency of scattered light with electron density agrees with theoretical estimates.