The Valpelline Series (Dent-Blanche Tectonic System, Western Italian Alps) is a sector of lower continental crust, which consists of Permian migmatitic metapelite with different mineral assemblages (i.e., garnet-, cordierite- and orthopyroxene-bearing), minor amphibolite and marble, intruded by aplite and pegmatite. Widespread melt production in metapelite and locally in amphibolite occurred during the development of the regional foliation. The P–T conditions during migmatisation, estimated using conventional geothermobarometers, range between 800–900 °C and 0.5–0.8 GPa, with a difference of up to ∼50 °C between cordierite- and orthopyroxene-bearing migmatites, the latter reaching higher temperatures. The Valpelline Series shows rock types, metamorphic assemblages, P–T conditions and published ages of high-temperature regional metamorphism like the archetypal lower crust section of the Ivrea-Verbano Zone in the Southern Western Alps. The latter likely represents an external portion of the same extending lower crust, at the onset of the Tethyan rifting due to lithospheric extension and asthenospheric rising.

The Pliocene–Quaternary volcanic rocks which outcrop between Qorveh and Bijar are part of post-collisional within-plate volcanic activity in northern Iran. These mafic alkaline rocks form part of the northern arm of the Sanandaj–Sirjan (Hamedan–Tabriz) zone. Thermobarometry on equilibrium clinopyroxene – whole-rock pairs yields pressures and temperatures of 4–6 (±1.8) kbar and 1182–1213 (±27) °C, respectively; olivine – whole-rock (melt) equilibrium thermometry yields crystallization temperatures of 1212–1264 (±27) °C. Field relationships, including the presence of pyroxenitic xenoliths, and geochemical evidence (e.g. high FeO/MnO, and low CaO compared to lavas derived from peridotite sources) suggest a pyroxenitic mantle source for the studied rocks. Variation of trace elements and isotopic ratios (i.e. Ce/Pb, Ba/La, 87Sr/86Sr) indicate that this pyroxenite mantle source was generated by interaction between melted sediments of the subducted Neo-Tethys slab with ambient peridotitic lithospheric mantle. The resulting metasomatized lithosphere is denser and has a lower viscosity than the peridotitic mantle, and tectonic disturbance can cause it to fall into the depths of the mantle. The descending volatile-rich material starts to melt with increasing temperature. Modelling of rare earth element (REE) abundances suggests that <1 % partial melting of the descending pyroxenite could create the Plio-Quaternary alkali basaltic magma of the Qorveh–Bijar. The geochemical evidence for lithospheric foundering, and hence drip magmatism, in the Qorveh–Bijar volcanic belt is supported by seismographic studies indicating thinned lithosphere beneath the study area.

Galena–tetrahedrite intergrowth textures have been observed in some quenched run products of melting experiments conducted at 500 and 600°C in the systems ZnS–PbS–FeS–Cu2S–Sb2S3 and ZnS–PbS–FeS–Cu2S–Sb2S3–As2S3, using the evacuated silica-tube method. At 600°C the intergrowth formed an interface between sulfide melt and galena, whereas at 500°C it existed as inclusions partially embedded or completely embedded within tetrahedrite. At 600°C tetrahedrite was absent in PbS-bearing experiments, instead galena and melt were a part of the equilibrium phase assemblage. From the disposition of the galena–tetrahedrite intergrowths at 500°C it is evident that droplets of galena–tetrahedrite melt coexisted with tetrahedrite or tetrahedrite + galena and gave rise to these intergrowths upon quenching. The intergrowths coexisting with galena probably represent compositions on the galena-rich liquidus in the galena–tetrahedrite binary and those coexisting with tetrahedrite represent points on the tetrahedrite-rich liquidus. A eutectic at galena:tetrahedrite = ~30:70, very close to 500°C is apparent. It is clearly indicated that galena–tetrahedrite intergrowths can be formed by sulfide partial melting, and could be used as a potential indicator of partial melting in metamorphosed sulfide ore deposits.

Orthopyroxene-bearing felsic gneiss occurs as foliation-parallel layers and bands together with aluminous granulite, mafic granulite, and quartzofeldspathic granulite in the Chilka Lake migmatite complex of the Proterozoic Eastern Ghats Belt, India. The rock was classified previously as charnockite which underwent granulite-facies metamorphism. Field and textural features of this rock show evidence of the partial melting of a biotite-bearing greywacke protolith. Orthopyroxene with/without garnet and cordierite were produced with K-feldspar as peritectic phases of incongruent melting of presumed metaluminous sediments. Fluid-inclusion data suggest the presence of high-density CO2-rich fluids during peak metamorphism, which are similar to those found in associated aluminous granulite. Whole-rock major and trace element data show wide variability of the source materials whereas REE distributions show enriched LREE and flat HREE patterns. Zircon grains from representative samples show the presence of inherited cores having spot dates (SHRIMP) in the range c. 1790–3270 Ma. The overgrowth on zircon was formed predominantly during c. 780–730 Ma and sporadically during c. 550–520 Ma. Some neoblastic zircons with c. 780–730 Ma ages are also present. U-rich dark zones surrounding cores appear partially metamictised, but spot ages from this zone vary within c. 1000–900 Ma. The <1000 Ma ages represent metamorphism that mirrors the events in associated aluminous granulite. The sources of metaluminous sediments are speculative as the rock compositions are largely modified under granulite-facies metamorphism and partial melting. Considering the accretionary tectonic setting of the Eastern Ghats Belt during the c. 1000–900 Ma time frame, a greywacke-type protolith for the migmatite complex has been proposed.

The Harsin–Sahneh serpentinized peridotites are widely exposed along the Zagros suture zone in the western region of Iran and are considered to represent remnants of Neo-Tethys oceanic lithosphere at the junction of the Arabian and Iran Plates. These rocks are characterized by low contents of SiO2 (38.8–43.5 wt%), Al2O3 (0.1–3.8 wt%), CaO (0.2–8.2 wt%) and TiO2 (< 1 wt%) and high MgO contents (31.1–46.0 wt%). Their enrichments of large ion lithophile elements and light rare earth elements, with high 87Sr/86Sr(i) values (0.7036–0.7109) and relatively high variations in their εNd(t) (–7.5 to +7.8) values, indicate that the Harsin–Sahneh peridotites were metasomatized by flux released from the oceanic subducting slab in an active margin. The chemical compositions and isotopic ratios of these rocks suggest that they were formed as residue of mid-oceanic ridge basalt in the lithosphere that was then subsequently re-melted and metasomatized in a supra-subduction zone system. The occurrence of both mid-oceanic ridge and supra-subduction zone-type peridotites suggests that the heterogeneity of the upper mantle may have occurred due to the different ratios of partial melting and melt–rock reaction processes in different tectonic settings within the Neo-Tethys realm. The Harsin–Sahneh peridotites provide a good explanation of multistage melt extraction as well as melt–rock and metasomatic reactions in the mantle sequence of the Zagros ophiolite complex.

High-SiO2 rocks referred to as oceanic plagiogranites are common within the crustal sequences of ophiolites; however, their mode of petrogenesis is controversial with both late-stage fractional crystallization and partial melting models being proposed. Here, we present new whole-rock data from plagiogranitic dyke-like bodies and lenses from the lower and middle sections of the sheeted dyke complex of the Cretaceous Muslim Bagh Ophiolite, northwestern Pakistan. The plagiogranites have similar geochemical signatures that are inconsistent with them being the fractionation products of the mafic units of the Muslim Bagh Ophiolite. However, the plagiogranites all display very low TiO2 contents (<0.4 wt%), implying that they formed by partial melting of mafic rocks. Melt modelling of a crustal gabbro from the Muslim Bagh Ophiolite shows that the trace-element signature of the plagiogranites can be replicated by 5–10% melting of a crustal hornblende gabbro with amphibole as a residual phase, resulting in a concave-up middle rare Earth element pattern. Compositional similarities between the Muslim Bagh Ophiolite plagiogranites and Archaean TTG (trondhjemite–tonalite–granodiorite) has implications for the generation of juvenile Archaean continental crust. As the Muslim Bagh Ophiolite was derived in a supra-subduction zone, it is suggested that some Archaean TTG may have been derived from melting of mafic upper crust in early subduction-like settings. However, due to the small volume of Muslim Bagh Ophiolite plagiogranites, it is inferred that they can be instructive on the petrogenesis of some, but not all, Archaean TTG.

The three-dimensional distribution of melt in partially molten synthetic samples compositionally corresponding to diopside (90 wt.%)–anorthite (10 wt.%) and doped with PbO, WO3, MoO3, or Cs2O to enhance contrast was studied by X-ray computed tomography (CT) with synchrotron radiation. The heavy elements were strongly concentrated in the melt and contributed to an increase of the X-ray linear attenuation coefficient (LAC) of it. PbO was found to be compatible with silicate melt (>20 wt.% in solution) and incompatible with diopside crystals. Other oxides WO3 (∼10 wt.%), MoO3 (∼5 wt.%) and Cs2O (< 5 wt.%) are also soluble only in the melt. Such doping is useful not only for LAC control in X-ray CT measurements, but also for systematic control of the structure (wetting properties, distribution and connectivity) of partial melt. This technique gives basic information for discussion of the 3D distribution of partial melt having different wetting properties. As PbO was most effective in visualization of the diopside–anorthite partially molten system, CT images of the PbO-bearing sample were used for further 3D investigation of distribution. A distribution of dihedral angles at solid-melt-solid triple junctions ranging from 22 to 55° was observed with the 3D data. This range in angle distribution was probably caused by anisotropy of crystals and the result supports the argument that there is some limitation in a theoretical framework of stereology which estimates the 3D structure based on 2D observations. Investigators have begun to apply X-ray CT to the study of the 3D distribution of partial melts in rocks using synchrotron radiation. Our study on the effect of doping is one approach for developing a technique to investigate 3D melt distribution.

Cretaceous granites are widespread in the North Dabie orogen, Central China, but their emplacement sequence and mechanism are poorly known. The Tiantangzhai Complex in the North Dabie Complex is the largest Cretaceous granitic suite consisting of six individual intrusions. In this study, zircon U–Pb ages are used to constrain the crystallization and protolith ages of these intrusions. The Shigujian granite is a syn-tectonic intrusion with an age of 141 Ma. This granite was emplaced under a compressional regime. Oscillatory rims of zircons have yielded two peaks at 137±1 Ma and 125±1 Ma. The 137±1 Ma peak represents the beginning of orogenic extension and tectonic collapse, whereas the 125±1 Ma peak represents widespread granitic magmatism. Zircon cores have yielded concordant ages between 812 and 804 Ma, which indicate a crystallization age for the protolith. The Tiantangzhai granites show relatively high Sr contents and high La/Yb and Sr/Y ratios. The Shigujian granite has positive Eu anomalies resulting from partial melting of a plagioclase-rich source in an over-thickened crust. Correspondingly, in situ Lu–Hf analyses from zircons yield high negative εHf(t) values from −24.8 to −26.6, with two-stage Hf model ages from 2748±34 to 2864±40 Ma, suggesting that the magmas were dominantly derived from partial melting of middle to lower crustal rocks. The Dabie orogen underwent pervasive NW–SE extension at the beginning of the early Cretaceous associated with subduction of the Palaeo-Pacific plate beneath eastern China.

The Chehugou granite-hosted molybdenum deposit is typical of the Xilamulun metallogenic belt, which is an important Mo–Ag–Pb–Zn producer in China. A combination of major and trace element, Sr and Nd isotope, and zircon U–Pb isotopic data are reported for the Chehugou batholith to constrain its petrogenesis and Mo mineralization. The zircon SIMS U–Pb dating yields mean ages of 384.7 ± 4.0 Ma and 373.1 ± 5.9 Ma for monzogranite and syenogranite and 265.6 ± 3.5 Ma and 245.1 ± 4.4 Ma for syenogranite porphyry and granite porphyry, respectively. The Devonian granites are calc-alkaline with K2O/Na2O ratios of 0.44–0.52, the Permian granites are alkali-calcic with K2O/Na2O ratios of 1.13–1.25, and the Triassic granites are calc-alkaline and alkali-calcic rocks with K2O/Na2O ratios of 0.78–1.63. They are all enriched in large-ion lithophile elements (LILEs) and depleted in high-field-strength elements (HFSEs) with negative Nb and Ta anomalies in primitive mantle-normalized trace element diagrams. They have relatively high Sr (189–1256 ppm) and low Y (3.87–5.43 ppm) concentrations. The Devonian granites have relatively high initial Sr isotope ratios of 0.7100–0.7126, negative ɛNd(t) values of −12.3 to −12.4 and 206Pb/204Pb ratios of 16.46–17.50. In contrast, the Permian and Triassic granitoids have relatively low initial 87Sr/86Sr ratios (0.7048–0.7074), negative ɛNd(t) values of −10.1 to −13.1 and 206Pb/204Pb ratios of 17.23–17.51. These geochemical features suggest that the Devonian, Permian and Triassic Chehugou granitoids were derived from ancient, garnet-bearing crustal rocks related to subduction of the Palaeo-Asian Ocean and subsequent continent–continent collision between the North China and Siberian plates.

The Takab complex is composed of a variety of metamorphic rocks including amphibolites, metapelites, mafic granulites, migmatites and meta-ultramafics, which are intruded by the granitoid. The granitoid magmatic activity occurred in relation to the subduction of the Neo-Tethys oceanic crust beneath the Iranian crust during Tertiary times. The granitoids are mainly granodiorite, quartz monzodiorite, monzonite and quartz diorite. Chemically, the magmatic rocks are characterized by ASI<1.04, AI<0.87 and high contents of CaO (up to ~14.5 wt%), which are consistent with the I-type magmatic series. Low FeOt/(FeOt+MgO) values (<0.75) as well as low Nb, Y and K2O contents of the investigated rocks resemble the calc-alkaline series. Low SiO2, K2O/Na2O and Al2O3 accompanied by high CaO and FeO contents indicate melting of metabasites as an appropriate source for the intrusions. Negative Ti and Nb anomalies verify a metaluminous crustal origin for the protoliths of the investigated igneous rocks. These are comparable with compositions of the associated mafic migmatites, in the Takab metamorphic complex, which originated from the partial melting of amphibolites. Therefore, crustal melting and a collision-related origin for the Takab calc-alkaline intrusions are proposed here on the basis of mineralogy and geochemical characteristics. The P–T evolution during magmatic crystallization and subsolidus cooling stages is determined by the study of mineral chemistry of the granodiorite and the quartz diorite. Magmatic crystallization pressure and temperature for the quartz-diorite and the granodiorite are estimated to be P~7.8±2.5 kbar, T~760±75°C and P~5±1 kbar, T~700°C, respectively. Subsolidus conditions are consistent with temperatures of ~620°C and ~600°C, and pressures of ~5 kbar and ~3.5 kbar for the quartz-diorite and the granodiorite, respectively.

Although sophisticated geochemical studies tell us that tonolite-trondhjemite-granodiorite (TTG) plutonic complexes must be formed by partial melting of metabasaltic source material, they cannot tell us the tectonic regime in which this crust was formed, nor how large volumes of TTG magma can be generated. This study suggests that a solution to TTG arc crust formation requires a strongly interdisciplinary approach, to resolve the tectonic setting (slab melt verses mafic lowermost crust sources), the time and length scales for melting and extraction, and the role of melt segregation mechanisms in the formation of both Archean TTGs and more recent adakite-like magmas. The aim of this paper is to present an experimental approach which, when coupled with numerical models, allows some of these issues to be addressed. The experiments are designed to reproduce the local changes in bulk composition that are predicted to occur in response to buoyancy-driven melt segregation along grain edges and associated compaction of the solid residue. The preliminary study presented here documents the changes we observe in the melt composition and melt and solid phase modes between earlier direct partial melting and the new segregation equilibration experiments on metabasalt bulk compositions. The results suggest that if dynamic melt segregation and equilibrium processes are active, they may modify the normally robust geochemical indicators, such as Mg-numbers, which are typically used to develop models of TTG petrogenesis.

Continental basalts ranging in age from 16.5 to 19.08 Ma crop out throughout the northern part of the Arabian plate. The basalts have distinctive petrographic characteristics such as rounded and skeletal olivine phenocrysts with abundant melt inclusions, implying the mixing of two distinct magmas. All of the analysed basalts are tholeiitic in composition. The presence of quartz xenocrysts with clinopyroxene rims in some samples indicates that crustal assimilation was probably an important process during magma ascent to the surface, and low Mg number and high SiO2 contents of the basalts clearly show that they have experienced fractional crystallization as well as crustal contamination. Variations of the major and trace elements versus MgO show that olivine+clinopyroxene+plagioclase were the main fractionating minerals. In terms of incompatible trace elements, the basalts have OIB-like signatures with a slight depletion at Nb–Ta on primitive-mantle-normalized diagrams. The basalts have slightly LREE enriched patterns with La/YbN = 5.5 to 6.7. La/Nb ratios are close to unity, suggesting the melts may have originated in the asthenospheric mantle. Partial melting modelling based on REE data imply that the melts were not produced from a single mantle source depth, which is either purely a spinel- or garnet-peridotite end member. The samples lie on a binary mixing line between low-degree melts (<5%) from garnet-peridotite and higher-degree melts (>10%) from spinel-peridotite sources on a plot of La/Yb v. Dy/Yb, requiring interaction of melts derived from both garnet- and spinel-peridotite fields. Melts originating from both sources were initially tapped by distinct magma chambers, which subsequently hybridized into a single flow. Hybridized magma ascended to the surface along Neogene strike-slip faults, which are linked to the Dead Sea Fault Zone.

Although sophisticated geochemical studies tell us that tonolite–trondhjemite–granodiorite (TTG) plutonic complexes must be formed by partial melting of metabasaltic source material, they cannot tell us the tectonic regime in which this crust was formed, nor how large volumes of TTG magma can be generated. This study suggests that a solution to TTG arc crust formation requires a strongly interdisciplinary approach, to resolve the tectonic setting (slab melt verses mafic lowermost crust sources), the time and length scales for melting and extraction, and the role of melt segregation mechanisms in the formation of both Archean TTGs and more recent adakite-like magmas. The aim of this paper is to present an experimental approach which, when coupled with numerical models, allows some of these issues to be addressed. The experiments are designed to reproduce the local changes in bulk composition that are predicted to occur in response to buoyancy-driven melt segregation along grain edges and associated compaction of the solid residue. The preliminary study presented here documents the changes we observe in the melt composition and melt and solid phase modes between earlier direct partial melting and the new segregation equilibration experiments on metabasalt bulk compositions. The results suggest that if dynamic melt segregation and equilibrium processes are active, they may modify the normally robust geochemical indicators, such as Mg-numbers, which are typically used to develop models of TTG petrogenesis.

Leucogranites are typical products of collisional orogenies. They are found in orogenic terranes of different ages, including the Proterozoic Trans-Hudson orogen, as exemplified in the Black Hills, South Dakota, and the Appalachian orogen in Maine, both in the USA, and the ongoing Himalayan orogen. Characteristics of these collisional leucogranites show that they were derived from predominantly pelitic sources at the veining stages of deformation and metamorphism in upper plates of thickened crusts. Once generated, the leucogranite magmas ascended as dykes and were emplaced within shallower parts of their source sequences. In these orogenic belts, there was a strong connection between deformation, metamorphism and granite generation. However, the heat sources needed for partial melting of the source rocks remain controversial. Lack of evidence for significant intrusion of mafic magmas necessary to cause melting of upper plate source rocks suggests that leucogranite generation in collisional orogens is mainly a crustal process.

The present authors evaluate five types of thermal models which have previously been proposed for generating leucogranites in collisional orogens. The first, a thickened crust with exponentially decaying distribution of heat-producing radioactive isotopes with depth, has been shown to be insufficient for heating the upper crust to melting conditions. Four other models capable of raising the crustal temperatures sufficiently to initiate partial melting of metapelites in thickened crust include: (1) thick sequences of sedimentary rocks with high amounts of internal radioactive heat production; (2) decompression melting; (3) thinning of mantle lithosphere; and (4) shear-heating. The authors show that, for reasonable boundary conditions, shear-heating along crustal-scale shear zones is the most viable process to induce melting in upper plates of collisional orogens where pelitic source lithologies are usually located. The shear-heating model directly links partial melting to the deformation and metamorphism that typically precede leucogranite genera

The mode of occurrence of borosilicates and the breakdown fronts of prograde tourmaline (tourmaline-out isograd) in three anatectic migmatite regions of the Ryoke metamorphic belt, SW Japan, are reported. The breakdown of tourmaline in the migmatite zones and release of boron into the melts, followed by the extraction of the boron-bearing melts from the migmatite zones occurred throughout the Ryoke metamorphic belt. Retrograde, magmatic tourmaline in interboudin partitions filled with leucosome is useful for calculating the degree of partial melting in the migmatites. Using boron contents in the leucosomes and pelitic schists, the degree of partial melting at the migmatite front of the Aoyama area is estimated to be 12 wt.%. Extraction of the boron-bearing melt is suggested by the boron-depleted nature of the migmatites. Connection of boudinage structures probably supplied the vertical pathways of the segregated melts, and major transport of the melts was accomplished by dyking. Irregularly shaped, amoeboid tourmaline locally occurs on the high-temperature side of the tourmaline-out isograds in the Yanai and Komagane areas, implying incomplete extraction of boron-bearing melts from those areas. Discriminating retrograde from prograde tourmaline enables correct recognition of the tourmaline-out isograd. The amount of retrograde tourmaline in migmatites can potentially be used as an indicator of the degree of melt extraction from them.

The prominent felsic granulites in the southern part of the Bohemian Massif (Gföhl Unit, Moldanubian Zone), with the Variscan (∼340 Ma) high-pressure and high-temperature assemblage garnet+quartz+hypersolvus feldspar ± kyanite, correspond geochemically to slightly peraluminous, fractionated granitic rocks. Compared to the average upper crust and most granites, the U, Th and Cs concentrations are strongly depleted, probably because of the fluid and/or slight melt loss during the high-grade metamorphism (900–1050°C, 1·5–2·0 GPa). However, the rest of the trace-element contents and variation trends, such as decreasing Sr, Ba, Eu, LREE and Zr with increasing SiO2 and Rb, can be explained by fractional crystallisation of a granitic magma. Low Zr and LREE contents yield ∼750°C zircon and monazite saturation temperatures and suggest relatively low-temperature crystallisation. The granulites contain radiogenic Sr (87Sr/86Sr340 = 0·7106–0·7706) and unradiogenic Nd ( = − 4·2 to − 7·5), indicating derivation from an old crustal source. The whole-rock Rb–Sr isotopic system preserves the memory of an earlier, probably Ordovician, isotopic equilibrium.

Contrary to previous studies, the bulk of felsic Moldanubian granulites do not appear to represent separated, syn-metamorphic Variscan HP–HT melts. Instead, they are interpreted as metamorphosed (partly anatectic) equivalents of older, probably high-level granites subducted to continental roots during the Variscan collision. Protolith formation may have occurred within an Early Palaeozoic rift setting, which is documented throughout the Variscan Zone in Europe.

The high-dT/dP-type Hidaka Metamorphic Belt in Hokkaido, northern Japan, represents a tilted crustal section of a magmatic arc of Tertiary age. The highest metamorphic grades reached are granulite facies, and the syn-metamorphic granitic rocks are widely distributed in this metamorphic terrane. The granitic rocks are mainly tonalitic and granodioritic in composition, and are classified into peraluminous (S-type) and metaluminous (I-type) granitoids. A large amount of pyroxene-bearing S-type tonalites (garnet-orthopyroxene tonalite) is distributed in the Niikappu river region in the northern part of the Hidaka Metamorphic Belt. Pyroxene-bearing I-type tonalite (two-pyroxene hornblende tonalite) bodies are also distributed in this area.

The pyroxene-bearing tonalites are classified into several sub-types on the basis of their field occurrence, texture, mineral assemblage and geochemical features. Homogeneous IH- and SH-type tonalite are thought to represent original magmas, i.e. those which have been generated by partial melting of mafic metamorphic rocks and pelitic-psammitic metamorphic rocks, respectively. Model calculations assuming batch partial melting indicate that possible restites are garnet-two-pyroxene mafic granulite for IH-type and garnet-orthopyroxene aluminous granulite for SH-type. The unexposed lowermost crust of the ‘Hidaka crust’ is thought to be composed of garnet-two-pyroxene mafic granulite, garnet-orthopyroxene aluminous granulite and metagabbros.