The effects of a subvolcanic intrusion on its host rocks in the Priego de Córdoba area (SE Spain) was studied by optical microscopy, X-ray diffraction and electron microscopy. The intrusion of a laccolith of stratiform dolerite in partially consolidated marly sediments at quite shallow depths below the ocean floor took place during the intracontinental rifting phase of the Subbetic zone of the Betic Cordilleras. In the first stage, contact metamorphism caused the crystallization of calc-silicate consisting of grossular andradite garnet, diopside, vesuvianite and titanite for which the upper temperature limit was 500°C. Phyllosilicates are found in a network of veins cross-cutting the carbonate and calc-silicate matrix, indicating their formation during a process of hydrothermal alteration superimposed on the contact aureole. In the area closest to the subvolcanic rocks, saponite is the main phyllosilicate although some dispersed chlorite is found. In the zone furthest from the contact, corrensite together with saponite and beidellitic smectites were observed. The presence of low-temperature phases (saponite) in the area closest to the laccolith reveals the evolution of the hydrothermal system toward cooler conditions. In the early stage, the circulation of a hot hydrothermal fluid caused the crystallization of chlorite in the area surrounding the subvolcanic body and corrensite in the more distal area, which might have begun even during the contact metamorphism stage. A cooling phase followed, resulting in the crystallization of saponite in the host rocks, and the crystallization of dioctahedral and trioctahedral smectites inside the subvolcanic body.

The circular 625 km2 alkaline Pilanesberg Complex, South Africa, contains coeval eruptive and several distinctive intrusive syenitic and foyaitic components, concentrically arranged at the surface. However, owing to poor outcrop the relationships between the different intrusive rocks, and their shape in the third dimension cannot be convincingly determined in the field. The original interpretation was a laccolith, whereas later models suggested a funnel shape, and appealed to ring-dyke and cone-sheet emplacement mechanisms. However, the radial widths of these coarse-grained bodies are over 1 km and so cannot have been emplaced as ring dykes or cone sheets, which are usually quite thin and fine grained. Creating the space for emplacement and removal of pre-existing country rocks for each postulated subsequent intrusive event presents a major challenge to this latter hypothesis. Extensive previously published and new field relationships are re-evaluated here to suggest that the body is a gently inward-dipping sheet and that subsequent injections of magma merely pumped up an existing and evolving magma chamber rather than intruded into solid rocks. A Bouguer gravity anomaly model is presented that supports the concept of a shallow, flat-bottomed body rather than one that continues to significant depth. There are many analogies with the Kangerlussuaq Intrusion, Greenland.

This paper describes three mid-Tertiary intrusions from the Henry Mountains (Utah, USA) that were assembled from amalgamation of multiple horizontal sheet-like magma pulses in the absence of regional deformation. The three-dimensional intrusion geometries are exceptionally well preserved and include: (1) a highly lobate sill; (2) a laccolith; and (3) a bysmalith (a cylindrical, fault-bounded, piston-like laccolith). Individual intrusive sheets are recognised on the margins of the bodies by stacked lobate contacts, and within the intrusions by both intercalated sedimentary wallrock and formation of solid-state fabrics. Finally, conduits feeding these intrusions were mostly sub-horizontal and pipe-like, as determined by both direct observation and modelling of geophysical data.

%The intrusion geometries, in aggregate, are interpreted to reflect the time evolution of an idealised upper crustal pluton. These intrusions initiate as sills, evolve into laccoliths, and eventually become piston-like bysmaliths. The emplacement of multiple magma sheets was rapid and pulsed; the largest intrusion was assembled in less than 100 years. The magmatic fabrics are interpreted as recording the internal flow of the sheets preserved by fast cooling rates in the upper crust. Because there are multiple magma sheets, fabrics may vary vertically as different sheets are traversed. These bodies provide unambiguous evidence that some intrusions are emplaced in multiple pulses, and that igneous assembly can be highly heterogeneous in both space and time. The features diagnostic of pulsed assembly observed in these small intrusions can be easily destroyed in larger plutons, particularly in tectonically active regions.

The Trawenagh Bay Granite (TBG) is shown to be a tabular pluton with gently inclined contacts that, from anisotropy of magnetic susceptibility (AMS) studies, was emplaced as a series of flow lobes whose geometries indicate that it flowed horizontally towards the W out of late stage adjacent steeply inclined monzogranite sheets of the Main Donegal Granite (MDG). We thus confirm in detail the central broad idea of the Pitcher & Read (1959) model that the Main Donegal Granite fed the Trawenagh Bay Granite. Early TBG flow lobes cut and are cut by deformation associated with the sinistral shear zone in which the MDG lies, thus demonstrating synchronicity of shearing and magmatism. The TBG magma leaked out of the shear zone and emplaced into undeformed country rocks and was probably guided by shear zone splays that die out along its northern and southern margins. At a late stage in the development of MDG, the splays developed from the NNE-trending SW boundary of the shear zone and caused a gap in this structure through which TBG magma was channelled out of the MDG. A review is presented of the last twenty-five years of published and unpublished work on the batholith, showing that the MDG shear zone was a long-lived structure almost certainly in existence before the emplacement of that body, and that four of the contiguous granitiods (Thorr, Ardara, and Rosses, as well as Trawenagh Bay) were all sourced within the shear zone. A new model is presented for the development of the batholith. The pre-existing crustal structure was a deep-seated N12°E fault in the basement to the Dalradian wall rocks of the granites, that was coupled to up to six other more minor WNW-ESE basement faults in the W. A NE-SW-trending sinistral shear zone was initiated at the end of the Caledonian orogeny, as calc-alkaline and deep-seated appinites were generated in the area. This shearing activated the pre-existing structures at the current crustal level, and the N12°E structure acted as a continental transform fault which allowed the dilation needed to facilitate the wedging space requirements of the MDG and the other units in the shear zone, as well as transferring regional sinistral shear through the system. The Thorr and Ardara plutons were emplaced first into the shear zone and then those magmas leaked out into the adjacent wall rocks: one to form a large laccolith, the other to form a balloon. Steep early MDG complex sheets (granodiorites and tonalities) were emplaced in the shear zone between the Thorr and Ardara emplacement sites. Dilation continued until late stage extensive monzogranite sheets were intruded in the NW and SE of the pluton. One of these probably leaked material westward to form the Rosses laccolith and southwestwards to form the TBG in the final stages of shear zone movement.

The Trawenagh Bay Granite (TBG) is shown to be a tabular pluton with gently inclined contacts that, from anisotropy of magnetic susceptibility (AMS) studies, was emplaced as a series of flow lobes whose geometries indicate that it flowed horizontally towards the W out of late stage adjacent steeply inclined monzogranite sheets of the Main Donegal Granite (MDG). We thus confirm in detail the central broad idea of the Pitcher & Read (1959) model that the Main Donegal Granite fed the Trawenagh Bay Granite. Early TBG flow lobes cut and are cut by deformation associated with the sinistral shear zone in which the MDG lies, thus demonstrating synchronicity of shearing and magmatism. The TBG magma leaked out of the shear zone and emplaced into undeformed country rocks and was probably guided by shear zone splays that die out along its northern and southern margins. At a late stage in the development of MDG, the splays developed from the NNE-trending SW boundary of the shear zone and caused a gap in this structure through which TBG magma was channelled out of the MDG. A review is presented of the last twenty-five years of published and unpublished work on the batholith, showing that the MDG shear zone was a long-lived structure almost certainly in existence before the emplacement of that body, and that four of the contiguous granitiods (Thorr, Ardara, and Rosses, as well as Trawenagh Bay) were all sourced within the shear zone. A new model is presented for the development of the batholith. The pre-existing crustal structure was a deep-seated N12°E fault in the basement to the Dalradian wall rocks of the granites, that was coupled to up to six other more minor WNW–ESE basement faults in the W. A NE–SW-trending sinistral shear zone was initiated at the end of the Caledonian orogeny, as calc-alkaline and deep-seated appinites were generated in the area. This shearing activated the pre-existing structures at the current crustal level, and the N12°E structure acted as a continental transform fault which allowed the dilation needed to facilitate the wedging space requirements of the MDG and the other units in the shear zone, as well as transferring regional sinistral shear through the system. The Thorr and Ardara plutons were emplaced first into the shear zone and then those magmas leaked out into the adjacent wall rocks: one to form a large laccolith, the other to form a balloon. Steep early MDG complex sheets (granodiorites and tonalities) were emplaced in the shear zone between the Thorr and Ardara emplacement sites. Dilation continued until late stage extensive monzogranite sheets were intruded in the NW and SE of the pluton. One of these probably leaked material westward to form the Rosses laccolith and southwestwards to form the TBG in the final stages of shear zone movement.