The scope of environmental impact assessments (EIAs) has traditionally been limited to on-site effects. This approach faces limitations when dealing with intricate value chains. Particularly for projects involving biomass-to-energy facilities, the primary environmental impacts often originate from off-site biomass production. This article considers the resulting limitations of EIAs by using two legal disputes in France as illustrative examples. In the Gardanne and the La Mède cases, French Administrative Courts sought to establish the necessity for project proponents to incorporate supply-related impacts into the EIA process. Strategies aimed at broadening the scope of EIAs, either by expanding the assessed project boundaries or by invoking the concept of cumulative impacts, were not deemed the most relevant approaches. Instead, the concept of ‘indirect impact’ emerged as a valuable tool for incorporating supply-related impacts. However, to prevent the indirect impact concept from being disregarded as too ambiguous or ineffective, it should be complemented by precise criteria to determine whether an impact may be considered indirect. We study these avenues within the broader evolving landscape of EIA laws, and by exploring ways to harmonize EIAs with other regulatory instruments governing value chains.

Phenological studies for Cuban bulrush [Oxycaryum cubense (Poepp. & Kunth) Lye] have been limited to the monocephalous form in Lake Columbus (Mississippi). Accordingly, there is little available information on potential phenological differences among O. cubense forms (monocephalous vs. polycephalous) and populations in other geographic locations in the United States. Therefore, seasonal patterns of biomass and starch allocation in O. cubense were quantified from two populations in Lake Columbus on the Tennessee-Tombigbee Waterway in Mississippi (monocephalous), two populations from Lake Martin in Louisiana (polycephalous), and two populations from Orange Lake in Florida (polycephalous). Monthly samples of O. cubense inflorescence, emergent, and submersed tissue were harvested from two plots per state from October 2021 to September 2022. During monthly data collection, air temperature and photoperiod were recorded. Starch allocation patterns were similar among all sites, with starch storage being less than 1.5% dry weight for all plant tissues. Biomass was greatest in Lake Columbus (monocephalous; 600.7 g dry weight [DW] m−2) followed by Lake Martin (polycephalous; 392.3 g DW m−2) and Orange Lake (polycephalous; 233.85 g DW m−2). Peak inflorescence biomass occurred in the winter for the Lake Martin and Orange Lake populations and in the summer for the Lake Columbus population. Inflorescence biomass in Lake Columbus had a positive relationship (r2 = 0.53) with warmer air temperatures. Emergent and submersed biomass generally had negative relationships with both photoperiod and temperature (r2 = 0.02 to 0.77) in all sites. Peak biomass was also negatively related to temperature and photoperiod. Results from this study indicate that there are differences in biomass allocation between the two growth forms of O. cubense and that growth can occur at temperatures below freezing. Low temperature tolerance may allow this species to expand its range farther north than previously suspected.

Waterhemp has evolved resistance to Group 2, 5, 9, 14, and 27 herbicides in Ontario, Canada, making control of this challenging weed even more difficult. Acetochlor is a Group 15, chloroacetanilide herbicide that has activity on many small-seeded annual grasses and some small-seeded annual broadleaf weeds, including waterhemp. The objective of this study was to ascertain if acetochlor mixtures with broadleaf herbicides (dicamba, metribuzin, diflufenican, sulfentrazone, or flumioxazin), applied preemergence (PRE), increase multiple-herbicide-resistant (MHR) waterhemp control in soybean. Five trials were conducted over 2 yr (2021 and 2022). The acetochlor mixtures caused ≤7% soybean injury, except acetochlor + flumioxazin, which caused 19% soybean injury. Acetochlor applied PRE controlled MHR waterhemp 89% at 4 wk after application (WAA). Dicamba, metribuzin, diflufenican, sulfentrazone, or flumioxazin controlled MHR waterhemp 59%, 67%, 58%, 64%, and 86%, respectively, at 4 WAA. Acetochlor applied in a mixture with dicamba, metribuzin, diflufenican, sulfentrazone, or flumioxazin provided good to excellent control of MHR waterhemp; control ranged from 91% to 98% but was similar to acetochlor applied alone. Acetochlor alone reduced MHR waterhemp density and biomass 98% and 93%; acetochlor + flumioxazin reduced waterhemp density and biomass by an additional 2% and 7%, respectively. This research concludes that acetochlor applied in a mixture with flumioxazin was the most efficacious mixture evaluated for MHR waterhemp control.

Facing increasing nonrenewable and environmental concerns with fossil power generation, renewable energy is being supported by government mechanisms. With the power generation cost of renewables generally higher than fossil fuels, determining the optimal level of these mechanisms requires an understanding of households’ prosocial behavior toward renewables. The issue is determining the magnitude households are willing to pay (WTP) for alternative renewables. Our hypothesis is this behavior varies by the type of renewable energy. As a test of this hypothesis, we apply a discrete choice experiment to measure households’ WTP. Results support our hypothesis with a positive WTP for solar energy, leading to a 62% reduction in solar subsidy, and a negative WTP for biomass and wind sources.

One of the largest remnants of tropical dry forest is the South American Gran Chaco. A quarter of this biome is in Paraguay, but there have been few studies in the Paraguayan Chaco. The Gran Chaco flora is diverse in structure, function, composition and phenology. Fundamental ecological questions remain in this biome, such as what bioclimatic factors shape the Chaco’s composition, structure and phenology. In this study, we integrated forest inventories from permanent plots with monthly high-resolution NDVI from PlanetScope and historical climate data from WorldClim to identify bioclimatic predictors of forest structure, composition and phenology. We found that bioclimatic variables related to precipitation were correlated with stem density and Pielou evenness index, while temperature-related variables correlated with basal area. The best predictor of forest phenology (NDVI variation) was precipitation lagged by 1 month followed by temperature lagged by 2 months. In the period with most water stress, the phenological response correlates with diversity, height and basal area, showing links with dominance and tree size. Our results indicate that even if the ecology and function of Dry Chaco Forest is characterised by water limitation, temperature has a moderating effect by limiting growth and influencing leaf flush and deciduousness.

In highlands, the increase in altitude results in a drastic decrease in temperature (T) that delays phenological development of maize, decreasing light interception during the cycle. This could be partially overcome by increasing plant density, but information is scarce for designing specific management options. The objective of this work was to describe changes in canopy development, photosynthetic performance, biomass and yield of maize grown at contrasting plant densities (5.7 plants m−2, locally used, and 8.7 plants m−2, 50% higher). Three experiments were carried out in two high-altitude environments within the Argentinean Andean region, Hornillos (HOR, 2380 masl, 2019–20 and 2020–21) and El Rosal (ERO, 3350 masl, 2019–20), and complementary data were obtained from samplings in 8 farmer’s fields (from 2400 to 3400 masl, 2022–23). In the experiments, mean T during the first 150 days of the cycle was 33% lower at ERO, which implied 39 extra days but 25% shorter thermal time to achieve silking. The higher plant density significantly increased leaf area index and light interception at ERO, whereas at HOR, this was only evident during the second season. At the leaf level, plants grown at ERO had thicker leaves with higher chlorophyll (+36%) and nitrogen (40%) content. Photosynthetic electron transport rate at full irradiance was +20% higher at ERO but significantly varied throughout the day with lowest values in the morning, which was not observed at HOR and was not related to light intensity or stomatal conductance. At HOR, the increase in plant density did not improve light interception, nor yield in 2019–20 (with average yields of 6356 kg ha−1) but it did improve both in 2020–21 when generally lower yields were attained (4821 kg ha−1). Across farmer’s fields, increasing densities consistently reduced yield per plant (r2 = 0.57***) but improved yield per area basis, which was maximised at 10 pl m−2 as a result of a steady increase in kernel number m−2 (up to 15 pl m−2). Thus, in these high-altitude environments, increasing plant density beyond recommended (6 pl m−2) is a promising approach for improving yield, with major penalties of supra-optimum densities being related to kernel weight. Further work is needed to explore the effect of different factors limiting kernel growth, over plant density responses.

There have been no systematic experiments conducted in Nevada's water-limited environment that examined the simultaneous benefits of soil health and feed value derived from cool-season cover cropping systems. The objective of this study was to determine the influence of different annual cool-season cover crop systems on above and belowground biomass production, plant tissue carbon and nitrogen, forage nutritive value (crude protein, acid, and neutral detergent fiber), relative feed value (RFV), and short-term soil health indicators under irrigation in a semi-arid environment. Treatments (cover crop systems) were a fallow (no cover crop), five monocultures of rye (Secale cereale L.), winter lentil (Lens culinaris Medik.), arrowleaf clover (Trifolium vesiculosum Savi), white sweetclover (Melilotus alba), forage kale (Brassica oleracea L.), and two three-species mixtures in 50-25-25 seeding ratios (CCM 1: rye, winter lentil, arrowleaf clover; CCM 2: rye, white sweetclover, forage kale). Cover crop systems were arranged in an RCBD with three replications. Plots were fall seeded in Reno, NV early October of each year (2020 and 2021) and terminated at the end of July of 2021 and 2022, respectively. Averaged across years, aboveground biomass production was lowest for the monoculture of winter lentil (4104 kg DM ha−1; SE = 1551) compared to all other cover crop systems (average = 7593 kg DM ha−1; SE = 1551). Biomass carbon produced was lowest for winter lentil (1717 kg ha−1; SE = 675) relative to all other cover crop systems (average = 3227 kg ha−1; SE = 675). The CCM 1 system had a greater C/N ratio (36.3) than CCM 2 and the monocultures of winter lentil, arrowleaf clover, and white sweetclover (average = 24.9). Belowground biomass did not differ among cover crop systems (average = 3161 kg DM ha−1; SE = 962). Crude protein concentration was similar among cover crop systems but the RFV was greatest for forage kale (RFV = 165; SE = 4.0) among all cover crop systems. Soil total N and organic carbon concentration did not differ among cover crop systems but soil K concentration was greatest under fallow (428 mg kg−1 soil; SE = 26) relative to all other systems (average = 345.6 mg kg−1 soil; SE = 26). Soil microbial community biomass was not altered by cover crop system or its interaction with year. While the short-term impact of the cover crop systems on soil health indicators was minimal relative to the fallow system, the overall results suggested that there is potential to integrate cover crops in Nevada's semi-arid environment under irrigation.

The development of glufosinate-resistant soybean cultivars has created opportunities for use of glufosinate applied postemergence for weed control. Four field experiments were conducted in 2021 and 2022 to ascertain the effect of glufosinate rate and the addition of ammonium sulfate on annual weed control in glyphosate/glufosinate/2,4-D–resistant soybean. An increased glufosinate rate of 500 from 300 g ai ha−1 improved control of common ragweed, common lambsquarters, redroot pigweed, and foxtail species and resulted in decreased density and dry biomass of common lambsquarters and foxtail species. The addition of ammonium sulfate to glufosinate increased control of common lambsquarters, 2 and 8 wk after application (WAA), and of foxtail species, 2, 4, and 8 WAA, but did not improve control of common ragweed and redroot pigweed. Increasing the dose of glufosinate from 300 to 500 g ai ha−1 improves control of common ragweed, redroot pigweed, common lambsquarters, and foxtail species; however, the benefit of the addition of ammonium sulfate to glufosinate is weed species-specific.

Cover cropping is a suggested soil conservation practice widely investigated in cropping systems. Cover crops suppress weeds and often are part of an integrated weed management plan that could lead to reduced herbicide use and possibly reduce the weed seedbank. Winter brassica cover crops are popular in the eastern Washington potato (Solanum tuberosum L.) production region, but in western Washington, the production of brassica seed crops presents disease issues along with the risk of cross-pollination, which limits the use of brassica cover crops. Research for this article was conducted in two trials from 2018 to 2020 and 2019 to 2021in Mount Vernon, Washington, to identify winter cover crops compatible with regional restrictions and climatic challenges in western Washington cropping systems. Treatments including a no-cover control, eight single species (including brassicas, grasses, and legumes), and a grass–legume mixture were investigated. Cover crop and weed biomass production were measured, and percent ground cover for cover crops and weeds by species was estimated. Cover crop biomass and weed suppression varied by year due to variable environments, but annual ryegrass (Lolium multiflorum Lam.) and the mixture were most consistent in producing large amounts of biomass and reducing weed biomass and cover in all years. The variability of percent weed cover response to environment was ameliorated when weed cover was normalized within each year’s control.

The striped venus clam Chamelea gallina (SVE), plays an important role as an infaunal filter-feeder in the ecosystem, besides an important economic role in the Black Sea coasts of Turkey. It is caught using hydraulic dredge boats, then processed, and the final product (frozen meat) is exported to EU countries. SVE fishing requires a special licence and regulations. Also, SVE beds were closed to fisheries for the recovery of stocks for 2 years. In the study, SVE beds were investigated during the closed season over two years to assess stock density. Additionally, the number of macrobenthic species that share the same habitat as the SVE was determined. The sampling area was divided into five sub-areas and four strata by depth and then stratified random sampling was applied to collect data. In 2011, SVE stock sizes in the sub-areas were 11,723.58 ± 5167.262 tons (Cide), 35,082.94 ± 27,510.95 tons (İnebolu), 10,077.05 ± 4970.68 tons (Türkeli), 3304.36 ± 3215.1 tons (Ayancık) and 1431.3 ± 1703.5 tons (Sarıkum). In 2012, these estimated stocks were 13,820.41 ± 6977.86 tons, 34,841.94 ± 14,623.71 tons, 8148.27 ± 5006.74 tons, 3420.72 ± 3093.67 tons and 2023.74 ± 2832.63 tons, respectively. However, the estimated SVE total biomass did not change significantly during the period when the fields were closed (P > 0.05). The results indicate that length-weight relationship parameters varied of b from 2.9011–2.9072 in two years. Shell damage during fishing, environmental factors, food competition and consumption by the main predator all have a significant impact on stock densities, and changes occurring in these conditions should be considered in fisheries management.

Herbicide-resistant Palmer amaranth is a troublesome weed in several agronomic crops and is a relatively new challenge to dry bean production in western Nebraska. Objectives were to evaluate preemergence (PRE) and postemergence (POST) herbicides for control of acetolactate synthase–resistant Palmer amaranth and their effect on Palmer amaranth density and biomass as well as dry bean injury and yield in western Nebraska. Field experiments were conducted in 2017 and 2019 near Scottsbluff, NE. The experiments were arranged as a two-factor strip-plot design. The strip-plot factor consisted of no-PRE or pendimethalin (1,070 g ai ha–1) + dimethenamid-P (790 g ai h–1) applied PRE. The main-plot factor was POST herbicides, which consisted of various mixtures of imazamox, bentazon, or fomesafen applied in a single or sequential application at labeled rates, and reduced rates of imazamox (9 g ai ha–1) + bentazon (314 g ai ha–1) + fomesafen (70 g ai ha–1) applied in single or sequential (two or three) applications. PRE herbicides reduced Palmer amaranth density and biomass during both years and increased dry bean yield in 2017. POST treatments containing fomesafen improved Palmer amaranth control compared with treatments containing imazamox and bentazon only. The sequential-application reduced-rate POST system did not improve Palmer amaranth control compared to one POST application containing fomesafen at a labeled rate in either year. Using pendimethalin + dimethenamid-P PRE followed by POST treatments containing imazamox + bentazon + fomesafen at a labeled rate provided 86% and 99% Palmer amaranth control in 2017 and 2019, respectively.

Drought is considered as the major environmental stress affecting coffee production, and high phosphorus (P) supply may alleviate the drought effects on crop metabolism. Here, we hypothesized that high P supply would mitigate the impacts of drought on Arabica coffee physiology, morphology, and biomass accumulation. Potted Arabica coffee plants were grown under two P levels: the recommended P fertilization (P), and twice the recommended fertilization (+P), and two water regimes: well-watered and water withholding for 32 days. Leaf, stem, and root P concentrations were increased under +P, with plants showing higher photosynthesis and growth than the ones receiving the recommended P dose. Higher plant growth under high P supply seems to upregulate leaf photosynthesis through the source–sink relationship. Under the water deficit, the reduction of leaf photosynthesis, stomatal conductance, transpiration, water use efficiency, carboxylation efficiency, chlorophyll content, number of plagiotropic branches, plant leaf area, and vegetative biomass production was similar comparing plants fertilized with the recommended P to those supplied with +P. However, Arabica coffee trees under high P supply and water deficit presented morphological and physiological traits similar to plants under well-watered and recommended P fertilization.

Root metrics and plant height for 256 excavated saplings and small trees of 27 species, including sown plants, were used to describe belowground structure and assess factors that influence shoot growth in a tropical dry forest (TDF) in Zambia. Models were developed to (i) estimate taproot depth from incomplete excavations and (ii) coarse lateral root biomass from proximal diameter data. The majority of the species studied are slow-growing and had a median height of <200 cm at the age of 16 years. Root development advanced sequentially from taproot elongation to thickening to coarse lateral root development. Shrubs in shallow soil had short taproots with a lower wood density. Plant age explained <10% of the variance in shoot height. Root variables explained the majority of the variance in shoot height. More research is needed to improve our knowledge about how belowground structures influence shoot growth and tree recruitment in TDFs of southern Africa.