The increasing demand for wireless communication has emphasized the need for multiband antennas. This study presents a novel design for a multiband antenna with reduced specific absorption rate (SAR), high gain, and improved front-to-back ratio (FBR) achieved through the integration with a 4 × 4 artificial magnetic conductor (AMC) surface. The proposed antenna covers a wide range of wireless frequency bands, including Industrial, Scientific, and Medical, Wireless Local Area Network, Worldwide Interoperability for Microwave Access, Wi-Fi 6E, and 7, with resonating frequencies at 2.4, 3.2, 5.5, 7.5, and 10 GHz. The AMC unit cell creates four zero-degree reflection phases with double negative properties at 2.5, 3.8, 5.5, and 7.5 GHz. The compact design measures 0.23λ0 × 0.296λ0 × 0.0128λ0 and placed 0.104λ0 above an AMC surface of size 0.512λ0 × 0.512λ0 × 0.1296λ0. This structure enhances the gain by up to 8.55dBi at 6.01 GHz. The proposed antenna has −10 dB impedance bandwidth for these corresponding frequencies viz 2.34–2.43 GHz (3.77%), 2.81–3.83 GHz (30.72%), 4.82–6.21 GHz (25.20%), 7–7.65 GHz (8.87%), and 8.06–10.31 GHz (24.5%). An overall average percentage reduction value of SAR taken at these frequencies has been found to be 96.11% with AMC structure. The antenna sample was successfully fabricated, and the experimental results have been found to match well with the simulation results. This integrated design offers a promising solution for wearable off-body communication devices.

In this work, a compact, wideband, circularly polarized wearable antenna is proposed using asymmetric coplanar strip feeding for wireless health monitor applications in the ISM frequency band. The proposed antenna consists of a composite right/left transmission line (CRLH TL) inspired structure to achieve compactness and a rectangular ring slot is created in the metallic ground to enhance the CP radiation of the antenna. A 5 × 5 artificial magnetic conductor unit cell-based metasurface is designed which is operating at 2.4 GHz as a ground plane for the CRLH-based CP antenna. Implementation of AMC-based metasurface as a ground plane results in enhancement of radiation characteristics of CRLH TL antenna. The proposed antenna has a small footprint of 50 × 50 mm2 with measured impedance bandwidth of 2.3–3.2 GHz. The 3 dB axial ratio bandwidth of the proposed antenna is 2.36–2.78 GHz with peak gain of 5.89 dBi. Simulation and experimental results show that proposed AMC-based antenna is robust in terms of structural deformation. Further, to validate the performance of the antenna for biomedical applications, we have simulated the proposed antenna with human phantom model. The proposed antenna exhibits stable scattering and radiation characteristics with the phantom body environment and due to the inclusion of AMC structure, the proposed design satisfies maximum specific absorption rate value given as per the IEEE standard safety guidelines.

A low-profile, wideband dual-polarized 1 × 2 multiple-input-multiple-output (MIMO) antenna with frequency selective surface (FSS) decoupling technique is presented. Low profile is realized with two different artificial magnetic conductor (AMC) cells out of which one operates at 3.5 GHz and other with dual band at 3.1 and 4.5 GHz. The proposed antenna height is maintained at 0.125λ0 which is significantly reduced when compared with the conventional perfect electric conductor (PEC) ground plane. Wideband dual polarization is enabled by two pairs of bow-tie antenna elements surrounded by a square ring placed in the orthogonal orientation. To mitigate the near-field coupling in 1 × 2 MIMO an FSS wall is constructed with wide band stop characteristics from 2.85 to 4.75 GHz. Measured results show by inserting FSS wall vertically, coupling reduction is improved by 27 dB over the existing coupling and the antenna exhibits a bandwidth of 57.14% (2.95–4.95 GHz) for VSWR<2 with port isolation of more than 25 dB for entire band of operation.

The artificial magnetic conductor (AMC) formed by meta-materials is used in the micro-strip antenna design for microwave sensor applications. The AMC structures with two uniplanar layers, which include modified square split-ring resonator cells, are repeated and formed into a 5 × 3 array. The antenna's operational bandwidth result is significant, and it is in the range of 2.8–10 GHz with a maximum gain of 11.8 dB. Cancer or malignant tumor cells have entirely different electrical properties than healthy breast tissue. Principal component analysis and specific absorption rate (SAR) are used as a parameter to identify cancer or malignant tumor cells in the breast. The SAR values have been calculated for each layer of the 3D breast model. The results show a difference in the SAR values based on the size and tumors' locations.

Proposed is a wideband, low profile, fully flexible, and all-textile-based slotted triangular antenna loaded with a 2 × 2 textile-inspired artificial magnetic conductor to be worn on the wrist. The integrated antenna design is designed to cover the frequency band from 3.1 to 6.5 GHz. The integrated design has two main resonances, where the first one is at 3.5 GHz, which can serve the WiMAX communication standard, while the second is at 5.8 GHz, which can serve the Industrial, Scientific and Medical (ISM)-band. The incorporated textile materials are composed of the conductive and dielectric fabrics that are realized by ShieldIt and Felt, respectively. When simulated against the human model wrist, the integrated antenna design displayed a realized gain of 6.71 dBi and radiation efficiency of 79.1%, at 3.5 GHz. Furthermore, at 5.8 GHz, it displayed a realized gain of 7.82 dBi and total efficiency performances of 66.1%. Moreover, it accomplished very low SAR levels within the antenna frequency band. Averaged over 1 g of tissue, it exhibited maximum SAR levels of 3.28 × 10−6 and 9.37 × 10−7 W/kg at 3.5 and 5.8 GHz, respectively. For the bent scenarios, the integrated antenna design displayed robustness when bent at an angle of 20 and 40°. Finally, measurement results are illustrated and analyzed. Based on the presented results, the suggested all-textile integrated antenna design might be designated for integration with the wristband to monitor the user health conditions through many possible frequency channels.

The design, simulations, and optimized results for a novel low specific absorption rate (SAR) monopole antenna on a single artificial magnetic conductor (AMC) cell are described in this paper. Simulated results show a reduction close to 70% in the 1 g ps SAR for the developed monopole antenna with the AMC in comparison to the monopole antenna without AMC. This allows higher radiation efficiency, battery drain reduction as well as mobile terminal user health risks reduction.

This paper presents a novel artificial magnetic conductor (AMC) loaded dipole above FR4 substrate. The proposed AMC consists of two metal layers that shield the wave from the lossy substrate leading to a significant increase in the dipole efficiency over a wide bandwidth. The dipole is fed through vias that are connected to a wideband balun placed on the opposite side of the ground plane. The proposed assembly is fabricated and characterized. Measurements, which are in a very good agreement with the electromagnetic simulations, show that the operating fractional bandwidth achieves the value of 16.2%, 1.927–2.267 GHz, with peak radiation efficiency of 72.5%.