Among the vast swathes of Gondwanan sedimentary rocks in India, exposures of the Lower Permian Talchir Formation at Manendragarh in India are exceptional for their cold marine faunal assemblage and muddy conglomerates of possible glacial origin. They may represent a record of the late Palaeozoic glaciation that affected Gondwana in the Permo-Carboniferous. Although the fossil record is relatively well documented, the sedimentology of this area is not well understood. This paper intends to fill the gap in knowledge regarding palaeogeography and the palaeoenvironmental changes within the basin through space and time. We distinguish conglomerates that are formed by glacial and mass flow processes. The lateral variation in facies associations along a NNE-SSW transect in the study area identifies the depositional basin as an interior sea that formed when the sea spilled over a steep basement ridge during a transgression. The benthic organisms remained confined to the seaward basin margin where they only flourished in the initial stage of basin filling. Locally derived, bioclastic storm beds are limited to the seaward flank of the basin. Alternating phases of glaciation and interglaciation resulted in an interbedded succession of grey shales and interglacial density flow deposits. The channels that fed these density flows are preserved closest to the landward margin of the basin. Co-existence of glacial diamictites and interglacial density flow deposits highlights the climatic changes in this part of Gondwana during the Late Palaeozoic.

Late Kungurian (Lower Permian) conodonts are described from the Kanthan Limestone, Perak, Peninsular Malaysia and for the first time from the Sibumasu Terrane of the Malay Peninsula. The co-occurrence of Gullodus duani, Gullodus hemicircularis, Gullodus sicilianus, Mesogondolella lamberti and Mesogondolella siciliensis represent the Mesogondolella lamberti International Conodont Zone and the broadly equivalent Mesogondolella siciliensis Regional Conodont Zone. A small fault-bounded basal Pennsylvanian (basal Bashkirian) conodont fauna including Gnathodus girtyi simplex and Declinognathodus inaequalis is also reported. The late Kungurian conodonts from the Kanthan Limestone were deposited in a relatively deep-water environment on the northern passive margin of the Sibumasu Terrane of the eastern Cimmerian Continent located at c. 35oS latitude. Biogeographically, the fauna represents the southern peri-Gondwana Cool Water Province which is consistent with its palaeogeographic location. A new scheme, utilizing characteristics of P1 elements, including position of the 1st denticle, location of 2nd and 3rd denticles, platform shape, platform cross-section, denticle shape in cross-section, and lateral denticle development is proposed for distinguishing between species of the hindeodid genera Gullodus, Hindeodus and Isarcicella. The late Kungurian fauna from the Kanthan Limestone represents the southern peri-Gondwana Cool Water Province supporting palaeogeographic reconstructions placing the Sibumasu Terrane in moderate southern palaeolatitudes in the Kungurian.

The Rochechouart impact structure, located in the western part of the Massif Central in France, has been suggested to be one of the largest impact structures in western Europe. Various age datings have placed the event in a span from the Late Triassic to the Early Jurassic, but the most recent works favour a Late Triassic age. Very little is known about the target environment at the time and location of the impact event. Seemingly coeval, potential tsunamites along palaeoshorelines of the sea that covered parts of continental Europe at the time have been suggested to be related to the impact event and may indicate a marine target setting. Here we apply the method of visual line-logging of the graded suevite in the Chassenon SC2 drill core. This method has previously been used to investigate the depositional environment of similar deposits in several marine target impact craters. It allowed us to compare the deposits at these craters with those at Rochechouart, and in this way not only confirm the marine target setting, but also estimate the target water depth to be ∼200 m. Altogether, our results indicate a palaeogeographic target setting in a newly opened seaway connecting the Paris Basin with the Aquitaine Basin, which may indicate an age of impact at the younger end of the hitherto suggested age-span, i.e. in the late Rhaetian – Early Jurassic.

During the early Bajocian, a conspicuous coal-bearing siliciclastic succession was deposited in the northern Tabas Bock, which is important for understanding the regional geodynamics of the Central-East Iranian Microcontinent (CEIM) as well as for the Jurassic coal genesis in this part of Laurasia. Sedimentary facies analysis in a well-exposed section of the lower Bajocian Hojedk Formation (Kalshaneh area, northern Tabas Block) led to the recognition of ten characteristic sedimentary facies and three facies associations, representing channels with point bars and floodplains of a Bajocian meandering river system. Modal analysis indicates that the mature quartz arenites and quartzo-lithic sandstones of the Hojedk Formation originated from the erosion and recycling of older, supracrustal sedimentary rocks on the Yazd Block to the west. The coal petrography and maturity show an advanced maturation stage, whereas the great thickness of these continental strata points to a pronounced extension-related subsidence in the northern Tabas Block. The rapid rate of differential subsidence can be explained by accelerated normal block-faulting in the back-arc extensional basin of the CEIM, facing the Neotethys to the south. Compared to the thick Jurassic, the post-Jurassic strata are relatively thin and played a limited role in the thermal history of the coal in the northern Tabas Block. A relatively high geothermal gradient in the tectonically highly mobile area of the northern Tabas Block and/or heating by regionally widespread Palaeogene intrusions were most probably the key drivers of the thermal maturation of the Middle Jurassic coals.

During the Early Ordovician Epoch, the Mediterranean brachiopod Province was extensive in the higher-latitude sectors of the globe in the Southern Hemisphere. The latter was much occupied by the massive continent of Gondwana, which stretched from north of the Equator S-wards to cover the South Pole. The Mediterranean Province can be separated into two groups: Group 1, the higher-latitude fauna dominated by large linguliform brachiopods; and Group 2, which is more diverse, particularly in orthides. The large linguliform brachiopod faunas are particularly well known in southern Europe (France, Spain and Bohemia) and North Africa, and the second group in Avalonia, Chile and Argentina. The province is different from, but merges with, more diverse contemporary faunas in the lower latitudes of Gondwana to its north, although the latter contrast with other lower-latitude faunal provinces in South China, Laurentia, Siberia and elsewhere. Since the Rheic Ocean between Avalonia and Gondwana was relatively narrow during the Early Ordovician Epoch, the Avalonian brachiopods were integral parts of the Mediterranean Province, but only until end of the Dapingian Age. This paper focuses on the earlier phases of the Mediterranean Province, although the province continued until near the end of the Ordovician Period. Intermediate-latitude Baltica and some other faunas are included in new principal components and other analyses in order to compare them with the Mediterranean Province faunas. Radiation was very significant for many brachiopod taxa during the period, with first appearances of the Plectambonitoidea (Taffiidae), several orthide families (Euorthisinidae, Tarfayidae and Anamalorthidae) and the earliest endopunctate orthide, the dalmanelloid Lipanorthis.

Later Cambrian and earliest Ordovician trilobites and brachiopods spanning eight horizons from five localities within the Sông Mã, Hàm Rồng and Đông Sơn formations of the Thanh Hóa province of Việt Nam, constrain the age and faunal affinities of rocks within the Sông Đà terrane, one of several suture/fault-bounded units situated between South China to the north and Indochina to the south. ‘Ghost-like’ preservation in dolomite coupled with tectonic deformation leaves many of the fossils poorly preserved, and poor exposure precludes collecting within continuously exposed stratigraphic successions. Cambrian carbonate facies pass conformably into Lower Ordovician carbonate-rich strata that also include minor siliciclastic facies, and the recovered fauna spans several uppermost Cambrian and Lower Ordovician biozones. The fauna is of equatorial Gondwanan affinity, and comparable to that from South China, North China, Sibumasu and Australia. A new species of Miaolingian ‘ptychopariid’ trilobite, Kaotaia xuanensis, is described. Detrital zircon samples from Cambrian–Ordovician rocks of the North Việt Nam and Sông Đà terranes, and from Palaeozoic samples from the Trường Sơn sector of Indochina immediately to the south, contain a predominance of ages spanning the Neoproterozoic period and have a typical equatorial Gondwanan signature. We associate the Cambrian and Tremadocian of the Sông Đà terrane with areas immediately to the north of it, including the North Việt Nam terrane and the southern parts of Yunnan and Guangxi provinces of China.

Heavy mineral analysis is a long-standing and valuable tool for sedimentary provenance analysis. Many studies have indicated that heavy mineral data can also be significantly affected by hydraulic sorting, weathering and reworking or recycling, leading to incomplete or erroneous provenance interpretations if they are used in isolation. By combining zircon U–Pb geochronology with heavy mineral data for the southern North Sea Basin, this study shows that the classic model of sediment mixing between a northern and a southern source throughout the Neogene is more complex. In contrast to the strongly variable heavy mineral composition, the zircon U–Pb age spectra are mostly constant for the studied samples. This provides a strong indication that most zircons had an initial similar northern source, yet the sediment has undergone intense chemical weathering on top of the Brabant Massif and Ardennes in the south. This weathered sediment was later recycled into the southern North Sea Basin through local rivers and the Meuse, leading to a weathered southern heavy mineral signature and a fresh northern heavy mineral signature, yet exhibiting a constant zircon U–Pb age signature. Thus, this study highlights the necessity of combining multiple provenance proxies to correctly account for weathering, reworking and recycling.

New occurrences of middle–late Darriwilian (Middle Ordovician) conodonts are reported from the Nyalam region, southern Tibet. The conodont-yielding strata, referred to the Chiatsun Group, accumulated on the north Indian continental margin of northern Gondwana. These Middle Ordovician conodonts include the informal species Histiodella sp. A in the middle part of the Lower Formation of the Chiatsun Group succeeded by a fauna of the Pygodus serra Zone in the upper part of that formation. Pygodus anserinus is recorded from the base of the Upper Formation of the Chiatsun Group. The Nyalam succession and its conodont taxa allow for precise correlation of the strata preserved on top of Mount Qomolangma (Mount Everest), eastern Tibet and the Peri-Gondwana Lhasa (north central Tibet), South China, North China, Tarim Basin and Thailand-Malaysia (Sibumasu Terrane) terranes and/or microcontinents. The middle Darriwilian positive increase in δ13Ccarb values (carbon isotope excursion, or MDICE) is recorded from most terranes, and can be related to a late middle Darriwilian global short-term cooling and sea-level drop. The cooling event prompted temperate- to warm-water taxa to migrate towards the palaeoequator and constrained the Australasian Province to locations near and at the palaeoequator. The intensified oceanic circulation and upwelling on continental margins probably caused some characteristic taxa to become extinct. The incoming fauna was mainly of cool-water taxa. The conodont specimens from southern Tibet are black to pale grey, corresponding to conodont colour index (CAI) values of 5 to 6, which demonstrates that the host sedimentary rocks were once heated to more than 360°C.

Geological, geomorphological and soil maps provide important information on the substrate as well as on the past and present physical landscape. For the intensely studied Netherlands coastal plain and Rhine–Meuse delta, many such map datasets have been compiled over the last two centuries. These mapping materials comprise older and younger legacy datasets, often fragmented over regions. They have been compiled within various research traditions and by various parties, involving geologists, soil scientists, geomorphologists and landscape archaeologists. The maps and datasets summarise overwhelming amounts of underlying data accumulated over the last few centuries, and are therefore valuable for reconstructing past landscapes.

Digital-infrastructure developments have enhanced possibilities for recombining existing and new data over the last few decades, e.g. through GIS solutions such as palaeogeographical base maps, from which multiple derived map products can be generated. Integration of thematic information from various source maps and underlying data is needed to use the accumulated data diversity to its full potential and to answer applied and fundamental scientific questions. Using diverse information to compile or update maps, however, requires awareness of legacy surveying strategies and the state of knowledge at the time the original data and maps were produced. This paper reviews the soil, geological and geomorphological mapping traditions. We evaluate their products, underlying data and the reasoning behind their compilation, focusing on their use in conventional and digital palaeogeographical mapping. This helps get the most out of large quantities of legacy and modern data, a major challenge for surface and substrate digital mapping in the big-data era.

New U–Pb radioisotopic ages on early Cambrian volcanic zircons condition a high-resolution Bayesian age model that constrains the first occurrences and zonations of West Gondwanan archaeocyaths and trilobites in southern Morocco. The oldest archaeocyaths in the Tiout Member of the Igoudine Formation (519.71 + 0.26/− 0.35 Ma) are c. 6 Ma younger than the oldest Siberian archaeocyaths. The oldest Moroccan trilobite fragments, from the lower member of the Igoudine, are constrained to 519.95 + 0.43/− 0.40 Ma. The succeeding Issendalenian Stage (i.e. Hupetina antique – Eofallotaspis tioutensis – Fallotaspis plana – Choubertella – Daguinaspis trilobite zones) spans c. 1.5 Ma (519.78 + 0.26/− 0.37 Ma to 518.43 + 0.25/− 0.69 Ma). Identifiable Moroccan fallotaspidids and bigotinids, among Earth’s oldest trilobites, occur above a positive δ13C excursion dated with our age model at 520.27 + 0.59/− 0.57 Ma, and correlated with the IV excursion peak within the lower range of Siberian Atdabanian Stage trilobites (Repinaella Zone). This excursion is the best standard for a Cambrian Series 2 base. The oldest West Gondwana trilobite fragments are c. 1 Ma younger than those in Siberia and c. 0.5 Ma older than the oldest Avalonian trilobites (Callavia Zone). This diachrony means a trilobite first appearance datum is an inappropriate chronostratigraphic base for Cambrian Series 2. Taxonomic differences in the oldest trilobites between Cambrian palaeocontinents are in accordance with trace fossil evidence for the group’s appearance possibly as late as c. 530 Ma in the Cambrian Evolutionary Radiation. Coeval 519–517 Ma dates from Avalonia (cool-water siliciclastic shelf) and West Gondwana (tropical carbonate platform) sections with distinct macrofaunas emphasize these successions were latitudinally separate by the late Ediacaran Period.

The area ‘Het Gooi’ in the Netherlands is part of a Pleistocene ice-pushed ridge system that partially drowned during the Holocene upon sea level and associated groundwater rise. As a result, the ridge system was gradually encroached by peat. From the late Middle Ages onward, man reclaimed the peatlands surrounding Het Gooi, heavily reducing their extension and lowering the regional groundwater level by increasingly intensive drainage. Based on historical and archaeological arguments, several authors assume that the Holocene peat cover in the border zones of ‘Het Gooi’ formed the extension of large raised peat bogs that formed further to the west and east, respectively. They presume that in the late Middle Ages these extensions reached ‘upslope’ to a maximum altitude of 3 m + NAP (Dutch Ordnance Datum – approximating mean sea level). However, the original extension is difficult to reconstruct, as this peat has disappeared as a result of its exploitation and oxidation, if having been present at all.

In this study, the maximum extension of the Holocene peat cover on the ice-pushed ridge system was reconstructed based on soil characteristics. Used soil characteristics concerned the presence of iron coatings around sand grains and the upper boundary of gleyic features, because these are indicators for the mean highest groundwater level (MHG). For peat to form, this MHG needs to be at or just above the ground surface for most of the year. Based on study of a number of soil transects, we reconstructed to what maximum altitude peat encroachment may have occurred. This ‘maximum extension’ can alternatively be described as the maximum altitude of the bottom of the peat onlapping the ridge system.

In the western border zone, this peat cover was found to have reached to c. NAP or just above, near Hilversum. No indications were found for the occurrence of raised bogs. We conclude that the phreatic groundwater level in this zone was controlled by the sea level and associated lake levels (Naardermeer and Horstermeer), a dominant role being played by the shallow presence of Pleistocene formations with a high hydraulic conductivity. In the eastern border zone, altitudes were more variable and in places reached 2 m + NAP. Peat at this higher elevation probably formed under the influence of a higher phreatic groundwater level, induced by the presence of a clayey Eemian fill with low hydraulic conductivity in the adjacent glacial basin (the Eem valley).

This study demonstrates the value of detailed soil transect studies for palaeogeographical reconstructions of the former Holocene peat cover in Pleistocene landscapes of NW Europe. It also provides independent data for validation of geohydrological models for such landscapes.

To help characterise the palaeogeographic and lacustrine environmental changes that resulted from the Holocene transgression and residual subsidence in the eastern Kanto Plain of central Japan, we analysed four drill cores and reviewed other core data from the southern part of the Lake Inba area. Fossil diatom assemblages yielded evidence of centennial-scale palaeogeographic and salinity responses to sea-level changes since the late Pleistocene. We determined that the seawater incursion into the Lake Inba area during the Holocene transgression occurred at approximately 9000 yr. We also recognised a late Holocene regression event corresponding to the Yayoi regression, considered to have occurred from ca. 3000 to ca. 2000 yr, and a subsequent transgression. Our data clarify some of the palaeogeographic changes that occurred in the Lake Inba area and document an overall trend toward lower salinity in the lake during the regression. In particular, the environment in Lake Inba changed from brackish to freshwater no later than 1000 yr. From the detailed palaeogeographic and palaeo-sea-level reconstruction, we recognised that residual subsidence occurred during the Holocene in this area. Thus, comparison of sea-level reconstructions based on modelling and fossil diatom assemblages is effective in interpreting Holocene long-term subsidence.

On 26 June 2018 Waldo Heliodoor Zagwijn died at the age of 89. He was an Emeritus Professor of the Faculty of Earth Sciences, Vrije Universiteit in Amsterdam. As a geologist, palynologist and palaeobotanist he focused on developing a stratigraphy of the Netherlands based on changes in vegetation and climate. The Dutch setting of a subsiding basin, and the clear signal of a sequence of glacial–interglacial cycles, was promising. As early as the late 1950s it became clear that the Quaternary Period included more than the previously assumed four ice ages in the Netherlands. In his PhD thesis Zagwijn defined the start of the Quaternary around 2.5 million years before the present (2.5 Ma). The international community accepted Zagwijn’s arguments after he retired. He showed how the rivers Meuse, Scheldt and Rhine had built the Netherlands in four dimensions. He is the instigator and architect of the climate- and chronostratigraphy of the Quaternary Period of Western Europe.

A comprehensive dataset is collated in a study on sediment transport, timing and basin physiography during the Early Cretaceous Period in the Boreal Basin (Barents Sea), one of the world’s largest and longest active epicontinental basins. Long-wavelength tectonic tilt related to the Early Cretaceous High Arctic Large Igneous Province (HALIP) set up a fluvial system that developed from a sediment source area in the NW, which flowed SE across the Svalbard archipelago, terminating in a low-accommodation shallow sea within the Bjarmeland Platform area of the present-day Barents Sea. The basin deepened to the SE with a ramp-like basin floor with gentle dip. Seismic data show sedimentary lobes with internal clinoform geometry that advanced from the NW. These lobes interfingered with, and were overlain by, another younger depositional system with similar lobes sourced from the NE. The integrated data allow mapping of architectural patterns that provide information on basin physiography and control factors on source-to-sink transport and depositional patterns within the giant epicontinental basin. The results highlight how low-gradient, low-accommodation sediment transport and deposition has taken place along proximal to distal profiles for several hundred kilometres, in response to subtle changes in base level and by intra-basinal highs and troughs. Long-distance correlation along depositional dip is therefore possible, but should be treated with caution to avoid misidentification of timelines for diachronous surfaces.

It is generally accepted that oceanic plate subduction has occurred along the eastern margin of Asia since about 500 Ma ago. Therefore, the Japanese Islands have a >500 Ma history of oceanic plate subduction in their geological records. In this paper, the accretionary history of the Japanese Islands is divided into six main stages based on the mode and nature of tectonic events and the temporal gaps in the development of accretionary processes. In the first stage, oceanic plate subduction and accretion started along the margin of Gondwana. After detachment of the North and South China blocks in Devonian time, accretionary complexes developed along island arcs offshore of the South and North China blocks. After the formation of back arc basins such as the Japan Sea, accretionary processes occurred only along the limited convergent margin, e.g. Nankai Trough. Detrital zircons of sandstones revealed the accretionary history of Japan. An evaluation of a comprehensive dataset on detrital zircon populations shows that the observed temporal gaps in the development of the Japanese accretionary complexes were closely related to the intensity of igneous activity in their provenance regions. Age distributions of detrital zircons in the accretionary complexes of Japan change before and after the Middle Triassic period, when the collision of the South and North China blocks occurred.

The field of provenance analysis has seen a revival in the last decade as quantitative data-acquisition techniques continue to develop. In the 20th century, many heavy-mineral data were collected. These data were mostly used as qualitative indications for stratigraphy and provenance, and not incorporated in a quantitative provenance methodology. Even today, such data are mostly only used in classic data tables or cumulative heavy-mineral plots as a qualitative indication of variation. The main obstacle to rigorous statistical analysis is the compositional nature of these data which makes them unfit for standard multivariate statistics. To gain more information from legacy data, a straightforward workflow for quantitative analysis of compositional datasets is provided. First (1) a centred log-ratio transformation of the data is carried out to fix the constant-sum constraint and non-negativity of the compositional data. Next, (2) cluster analysis is followed by (3) principal component analysis and (4) bivariate log-ratio plots. Several (5) proxies for the effects of sorting and weathering are included to check the provenance significance of observed variations and finally a (6) spatial interpolation of a provenance proxy extracted from the dataset can be carried out. To test this methodology, available heavy-mineral data from the southern edge of the Miocene North Sea Basin are analysed. The results are compared with available information from literature and are used to gain improved insight into Miocene sediment input variations in the study area.

The clay mineralogy of a set of Tertiary marine sediments from the Internal Subbetic of the Betic External Zone was examined. Two types of sedimentary environment were distinguished: a platform environment consisting of limestones, marls, organogenic limestones, conglomerates and silexites distributed heterogeneously in time and space; and deep environments, where the sedimentation consisted of marls, marly limestones, marly clays and silexites, with no sedimentary gap. A third group of sediments studied belongs to the Águila Complex, with mineralogical and stratigraphic characteristics very similar to the platform sediments. This third type of sediment is found in the sediments of the Campo de Gibraltar Complex as large, disperse blocks resulting from tectonic activity. A very similar mineral association was observed in all three domains, consisting of smectite, illite, mixed-layer I-S, kaolinite and lesser amounts of palygorskite and chlorite. Materials mainly derive from the erosion of Mesozoic sediments, and sedimentation was controlled by the compressive tectonics of the region.

Palaeogeography is the representation of the past surface of the Earth. It provides the spatial context for investigating how the Earth evolves through time, how complex processes interact and the juxtaposition of spatial information. In hydrocarbon exploration, palaeogeographies have been used to map and investigate the juxtaposition, distribution and quality of play elements (source, reservoir, seal and trap), as boundary conditions for source-to-sink analysis, climate modelling and lithofacies retrodiction, but most commonly as the backdrop for presentations and montages. This paper demonstrates how palaeogeography has been and can be used within an exploration workflow to help mitigate exploration risk. A comprehensive workflow for building palaeogeographies is described which is designed to provide a standard approach that can be applied to a range of tasks in exploration and academia. This is drawn from an analysis of the history of palaeogeography and how it has been applied to exploration in the past and why. Map applications, resolution and content depend on where in the exploration and production (E&P) cycle the map is used. This is illustrated here through three case studies, from the strategic decisions of global new ventures exploration to the more detailed basin and petroleum analyses of regional asset teams evaluating basins and plays. Through this, the paper also addresses three commonly asked questions: (1) How can I use palaeogeography in my workflow? (2) How reliable are the maps? (3) How do I build a palaeogeography?

Two hundred and eighty specimens of paradoxidids from two localities in the Holy Cross Mountains (Poland) have been reanalysed using morphometric techniques. Revision of the dataset provided evidence for the presence of two endemic taxa: Acadoparadoxides kozlowskii (Orłowski, 1959) and Acadoparadoxides samsonowiczi (Orłowski, 1959), both belonging to the earliest group of Acadoparadoxides, initially considered to be present only in Gondwanan successions. Thus, this is the first description of the members of this group outside West Gondwana. The taxonomic revision, and the presence of representatives of the earliest acadoparadoxidines coupled with the absence of taxa typical of Scandinavia that were previously described from this locality have resulted in the modification of the biostratigraphic scheme hitherto used in the Holy Cross Mountains. The newly established A. samsonowiczi – A. kozlowskii Assemblage Zone is correlated with the Morocconus notabilis Zone of Morocco, and thus represents the Cambrian Series 2 and 3 boundary interval. Links with West Gondwana challenge the existing palaeogeographic interpretations for the southern part of the Holy Cross Mountains and point to an urgent need to revise the position of the Małopolska Block during the middle Cambrian.