In this article, a new microstrip dual-narrowband bandpass filter employing parallel-coupled transmission lines and open stubs is presented, investigated, and fabricated. The proposed dual-narrowband bandpass filter is analyzed and its exact scattering parameters are calculated, simulated, and measured. So, calculated scattering parameters offer a deep inside view of the performance of the proposed filter. To analyze the proposed filter, the even- and odd-mode excitation are utilized. The input impedance under even- and odd-mode excitation are achieved by transmission line theory and inserted in the scattering parameter equations. Finally, the accurate scattering parameters are derived and compared with simulation results. Simulation results prove the theoretical results. Then, an optimized proposed filter is fabricated and matched with simulation results. The center frequency bands are 4.5 and 6.8 GHz. The optimized filter occupies 0.12 $ \times $ 0.096$\lambda _g^2$, which is small. Its fractional bandwidth of the first and second passband are 1.5 and 2.5%, respectively. Furthermore, wide and strong rejection levels in the stopbands are offered. The structure of the proposed filter provides many freedoms to design. There is an agreement between experimental and simulation results.

A class of balanced dual-band bandpass filters (BPFs) with planar transversal-signal-interference coupled-line sections is reported. In their building balanced dual-band BPF stage under differential-mode excitation, a second-order quasi-elliptic-type dual-band bandpass filtering transfer function is obtained. Specifically, from the transversal interaction among their two open-ended and virtually-short-ended half-wavelength coupled-line paths, sharp-rejection differential-mode dual passbands with several out-of-band transmission zeros at both sides are realized. To attain high common-mode suppression levels within the differential-mode passbands, two open-ended line segments are connected at the symmetry plane of the devised balanced dual-band BPF stage. Moreover, higher-order schemes based on in-series-cascaded multi-stage designs to further increase differential-mode selectivity and in-band common-mode rejection are illustrated. The operational principles and parametric-analysis design rules of the engineered transversal-coupled-line-based balanced dual-band BPF approach are detailed. Additionally, for a rigorous interpretation of their zero/pole characteristics, a digital-modeling framework is applied to them to connect RF balanced filters with their discrete-time versions. For practical-validation purposes, a microstrip prototype of two-stage/fourth-order balanced dual-band BPF is built and tested. It exhibits measured differential-mode dual passbands with center frequencies of 1.464 GHz and 2.294 GHz, 3-dB fractional bandwidths of 8.74% and 9.68%, and in-band common-mode rejection levels above 23.16 dB and 31.36 dB, respectively.

The manuscript reports on additively-manufactured (AM) coaxial-resonator-based bandpass filters (BPFs) and RF diplexers. A monolithic integration concept using stereolithography apparatus (SLA) is proposed and discussed in detail. Coupled-resonator-based synthesis alongside full-electromagnetic-based design methods is used for the design of the monolithic filters and RF diplexers. In particular, the paper discusses a new external coupling mechanism for dual-band BPFs that allow to independently control the coupling in each of the BPF passbands. Furthermore, a novel coaxial transmission line-type T-junction is proposed for the design of single- and dual-band RF diplexers. For practical validation purposes, multiple BPF and RF diplexer prototypes were designed, manufactured and tested at S- and C-band demonstrating the applicability of the proposed concept to low-cost, low-loss and low-weight RF components with complex geometrical features.

This paper reports on quasi-elliptic dual-band bandpass filters (BPFs) that were designed for the Filter Student Design Competition of the 2019 European Microwave Week. The proposed lumped-element (LE) BPF concept is based on two dual-band transversal cells and one multi-resonant cell that allow the realization of symmetric and asymmetric dual-band transfer functions shaped by six poles and five transmission zeros. A compact implementation scheme based on LE series resonators is proposed for size compactness and wide spurious free out-of-band response. For proof-of-concept demonstration purposes, a dual-band LE prototype with two passbands centered 1 and 1.5 GHz was designed, manufactured, and measured. It exhibited the following radio frequency measured performance characteristics. Passbands centered at 1.02 and 1.45 GHz, minimum insertion loss levels of 2.0 and 2.7 dB, and bandwidth of 146 and 105 MHz, respectively, for the first and the second passband, and out-of-band rejection >30 dB between 0 and 894 MHz, 1.17–1.34 GHz, and 1.72–6.9 GHz.

This paper presents, a dual-band bandpass filter using asymmetric stepped impedance stub loaded open loop resonator (OLR) for WLAN and WiMAX application. The outer OLR is realized to operate at lower passband of 2.45 GHz which is directly coupled to input and output ports whereas the asymmetric stepped impedance stub that loads the outer resonator contributes to 3.5 GHz passband. The introduction of asymmetric stepped impedance stub provides further control of improving the upper passband edge selectivity of second passband and in shifting the spurious modes away from second band thereby contributing to the wide upper stopband. The insertion loss is within 1.5 dB for each passband with 10 dB passband bandwidth of 250 MHz at both bands. A stopband up to 10 GHz is also obtained. A prototype is developed and the s-parameters obtained from electromagnetic simulation, equivalent transmission line model and measurement are in close agreement. The overall dimension of the filter is 25.45 × 15.89 mm2 which renders it a compact size.

Metamaterial transmission lines can be realized as a combination of right- and left-handed transmission line (TL) sections exhibiting positive and negative dispersion. This approach gives additional degrees of freedom for improving the performance of microwave devices. Artificial right- and left-handed sections, which are based on lumped-element unit cells consisting of inductance and capacitances (LC-cells), are used. This makes it possible to decrease dimensions of the devices drastically. Furthermore, using variable capacitors in LC-cells allows designing tunable devices. This paper presents the results of design, numerical simulation, and experimental investigation of a tunable rat-race ring and free-of-spurious response dual-band filter manufactured as integrated ceramic multilayer circuits based on low-temperature co-fired ceramics. Commercial semiconductor varactors have been used as tunable components.