Article Types
Research Questions
Results
Analysis
Impact
Community Content
Article Requirements
Title Page
Abstract
Figures and Tables
Supplementary Material
Acknowledgements
Author Contribution Statement
Funding Statement
Conflicts of Interest Statement
Ethics Statements
Data Availability Statement
References
Connections References
Policy on prior publication
Overleaf
English language editing services
Seeking permissions for copyrighted material
Author Affiliations
Artificial Intelligence
Article Types
Research Questions
A Research Question is a question or challenge (i.e. a call to solve a scientific or technical problem) submitted by experts or interest groups. Research Questions can be answered by a series of experiments, novel theories, tools, and techniques, or they can open a new field of experimentation or theoretical investigation.
If you are interested in suggesting a Research Question for Research Directions: Bioelectronics, please email the programme manager here. The journal’s Executive Editorial Board and the Advisory Council meet as required so there may be a delay before your question is evaluated.
How are Research Questions published?
Anyone can submit a Question to the journal. The Executive Editorial Board and the Advisory Council collectively decide whether to publish a Research Question according to the following criteria:
1. A Question shouldn’t be so broad that it will never be closed.
2. A Question shouldn’t be so restricted that it will be answered by fewer than 5 papers.
3. A Question can have some (but not extensive) overlap with another open Question. It can extend/update on a theme of a closed Question.
4. A Question should inspire researchers from different disciplines to contribute, and ideally, to collaborate.
5. A Question must be relevant to the journal’s scope.
6. A Question must be able to be answered by original research and review papers. Community content is very welcome but should be complementary rather than forming the majority of the content.
7. We cannot publish an unlimited number of Questions per year so the Executive Editorial Board and the Advisory Council will carefully consider the current set of open Questions when deciding whether to accept new ones.
How are Questions closed?
The Executive Editorial Board and the Advisory Council will deem a Question to be closed if any of the following apply:
- The content published in response to the Research Question is enough that the question or challenge is considered to have been answered.
- The field has evolved to the extent that the Research Question needs to be updated with a new version or is no longer relevant to the field.
- The Research Question has been open for a considerable period of time with few submissions received.
When a decision has been made to close a Research Question, an announcement will be made that from six months after the decision, the journal will not accept any more content for that Question. Any content submitted before that deadline will be considered for publication.
Can a Question be sponsored?
Yes. Any Question can be sponsored, even after it has been published. Note that the decision rests solely with Cambridge University Press & Assessment, who may decline sponsorship if the sponsor’s mission and values could be perceived as not aligning with the Press’ and the journal’s values. For more information read here. Sponsors must declare any conflicts of interest, e.g. a relationship between the journal’s editorial team and the sponsor.
A sponsor can also submit their own Research Question for consideration. Such Questions will be considered on their own merit before any sponsorship agreement is made. The Executive Editors and Advisory Council will not be informed of the offer of sponsorship. The decision on sponsorship is made by the Press and the Executive Editors and Advisory Council will be blinded from this process. If a Question is accepted but sponsorship is declined, the authors of the Question can still proceed with publication or can withdraw their submission.
If you would like to become a sponsor, please click here.
Results
These are detailed descriptions of research results in their various forms that contribute to answering the question posed. Novel research and replication/validation studies that contribute to answering the question will be considered and are encouraged. The typical article word count is ca. 2000 - 5000 words, but this limit can be exceeded as long as the content is justified.
It should be organised in the following sections:
- Abstract
- Introduction
- Methods (Detailed description of the methodology used or clear link to methods paper)
- Results
- Conclusions (Brief interpretation of how the results help answer the Question in the context of the broader literature)
- Acknowledgements
- Author contribution statement
- Funding statement
- Conflicts of interest statement
- Ethics statement
- Data availability statement
- Connections References (Please reference all the papers connected to this one, for example a methods paper or supplementary material)
- References
Methods Paper
Methods papers are submitted as Results. These are detailed descriptions of the method, including all the technical details necessary to its reproducibility. The typical article word count is ca. 2000 - 4000 words.
Methods papers should be organised in the following sections:
- Abstract
- Introduction (Brief background of the rationale and prior research for the study, highlights how the study addresses the specific Question paper)
- Methods (detailed description of the methodology that will be used)
- Funding statement
- Conflicts of interest statement
- Authorship contributions (CRediT)
- Connections References (please reference all the papers connected to this one, for example supplementary material)
- References
Analysis
A new analysis or meta-analysis of existing data, or an evaluation of the soundness of methodology, which highlights innovative examples of data reuse or presents compelling new findings. An analysis paper will focus on one or multiple sets of results authored by the same lab or multiple labs (by the same authors of the Results or by other authors).
It can be submitted simultaneously with a results paper.
Clearly present any interpretation as you would in an analysis/discussion section of a traditional paper. Cite what results you are analysing and any reference to other studies in the reference section.
- Abstract
- Introduction
- Methods (or clear link to methods paper)
- Analysis (Cite clearly which results you are analysing.)
- Conclusions
- Acknowledgements
- Author contribution statement
- Funding statement
- Conflicts of interest statement
- Ethics statement
- Data availability statement
- Connections References (Please reference all the papers connected to this one, for example a methods paper, results paper(s) or supplementary material.)
- References (all other cited outputs)
The typical article word count is ca. 2000 to 5000, but this limit can be exceeded as long as the content is justified.
Impact
A review-style paper that provides a comprehensive assessment of all the results and analyses published relevant in answering a Research Directions: Bioelectronics active question. Perspective/opinion articles can be submitted as an Impact paper. If you would prefer your opinion piece to not go through peer review, please submit it to the Community site. We suggest contacting the editors or programme manager with a proposal ([email protected]) if you are interested in submitting an Impact paper.
It should be organised into the following sections:
- Abstract
- Introduction
- Main Text with section headings as needed
- Conclusion and Perspectives
- Acknowledgements
- Author contribution statement
- Funding statement
- Conflicts of interest statement
- Ethics statement
- Data availability statement
- Connections References (Please reference all the papers connected to this one, for example all methods papers, all results papers and analysis papers.)
- References (all other cited outputs)
The typical word count is 5000, but this limit can be exceeded as long as the content is justified.
Community Content
Alongside formally published outputs,
We strongly recommend that all datasets, code, software tools, and other research materials are submitted to the community site to ensure these materials are easily discoverable and citable.
The list below gives examples of other types of outputs that can be submitted for consideration to the Research Directions: Bioelectronics Community. The list includes the content types and file formats we currently accept. Please contact [email protected] if there are other content types or file formats you would like to submit as additional materials. Based on this feedback, we may add further content types in the future.
At the current time, the following content types are available:
- dataset: data collected through a research process
- poster: a poster presented at a conference
- presentation: scholarly presentations of various kinds, including those used in teaching
- protocol/methodology: a description of an experiment or other research method
- video, images and audio: these could include animations, audio, figures or infographics to explain your research, or primary research objects that your research is based on
- working paper: full-length paper, typically designed to be submitted for peer review and formal publication by a journal or as part of a book
If you are submitting a dataset, poster, presentation, video, image or audio file, make sure that you provide detailed metadata that allows any reader to understand your Community item. We advise following these suggestions.
We encourage you to read the submission instructions and policies on Cambridge Open Engage before submitting to the Community, but also take into consideration the following specific guidelines for the Research Directions: Bioelectronics Community:
- All posted content must be in response to a published active question.
- The Editors reserve the right to reject content they do not deem relevant to the question posed.
- The content posted on the community is not peer reviewed but it is moderated according to the Engage policies and the scope of the Community. We aim to make a moderation decision on submissions within 3 to 5 business days, but this process may take up to 10 business days if the submission requires editorial escalation.
- We encourage all authors to have an ORCID ID and to provide it during submission to the Community. This will mean that, with your permission, we will be able to automatically update your ORCID record with details of your content, and that readers will be able to access your profile easily from your content page.
- If you submit a preprint to the Community and it is accepted, this does not guarantee acceptance for publication in the journal after peer review.
- If a preprint posted on the Community does go on to be published in the journal, we can add a link to the formally published version to your preprint. Use the VOR request form in your author dashboard to let us know your publication DOI.
- Community content for materials published formally in Research Directions: Bioelectronics should be hosted on the Community (or a third-party repository, if that is more appropriate to your materials). If you are planning to provide Community content with a formal submission to the Research Directions: Bioelectronics journal, please submit them to the Community and then provide their DOIs during the publication process, either in ScholarOne or to the editorial team dealing with your formal submission.
For further information about posting on Cambridge Open Engage, please see our:
Article Requirements
Authors should note the following:
- Articles should be submitted in a Word document (email [email protected] if you would like a template) or in a LaTeX file (see below for template).
- Articles can be submitted in either American or British English.
- All articles submitted must contain line numbers. Up to three levels of headings are allowed. Please indicate what level each heading should be.
- S.I. units should be used throughout in text, figures and tables.
- Authors should spell out in full any abbreviations used in their manuscripts the first time that they use it. Foreign quotations and phrases should be followed by a translation.
- Authors should provide 3 to 5 keywords for their manuscripts, except for Questions, where keywords are optional.
- Footnotes are not accepted in the manuscripts. Endnotes should be used instead. Note markers in body text are superscript numerals. Each note should end in a period.
- Dashes: En dashes should be used, with one letter space on each side.
- The order of parentheses should be ([ ]).
Title Page
The title page should include:
- The title of the article, which should be short but informative and accurately reflect the content.
- Authors’ names and contact details: authors should list their first name and last name in full, plus any other initials. You should indicate the corresponding author with an asterisk and in this case provide an email address. Please also list a brief affiliation for each author (assigned with superscript numbers) below the author names. For affiliations, the country is required and there should be no street addresses. For US-based authors, states must be 2 letter postal codes not spelled out, and there should be no zip codes. Please refer to Author Affiliations for more information.
- Word count, including all text but excluding tables, figures and references.
Abstract
Abstracts (200 words max for a Results or Analysis paper, it can be longer for an Impact paper) should summarise the background, findings, and implications of the work.
Figures and Tables
Tables should be supplied as separate, editable files, with the exception of authors using LaTeX (in which case tables can be embedded with the usual 'table' and 'tabular' environments). Resolution: halftone images must be saved at 300 dpi at approximately the final size. Line drawings should be saved at 1000 dpi, or 1200 dpi if very fine line weights have been used. Combination figures must be saved at a minimum of 600 dpi. Cambridge recommends that only TIFF, EPS, or PDF formats are used for electronic artwork. For more detailed guidance on the preparation of illustrations, pictures and graphs in electronic format please see the Cambridge Journals Artwork Guide.
Supplementary Material
We strongly recommend that all datasets, code, software tools, and other research materials are submitted to the Community site to ensure these materials are easily discoverable and citable. See community content for more information. If you wish to use another repository more appropriate for your research materials, please ensure that it follows repository best practices, in particular that it provides a DOI and that this is correctly referenced in your paper. We do not recommend sharing research materials as supplementary material to a paper.
Acknowledgements
You may acknowledge individuals or organisations that provided advice and/or support (non-financial). Formal financial support and funding should be listed in the Financial Support section (see below).
Author Contribution Statement
Authorship should be based on the following principles, as outlined in the Cambridge University Publishing Ethics Guidelines:
- Substantial contributions to the conception or design of the work; or the acquisition, analysis, or interpretation of data for the work;
- Drafting the work or revising it critically for important intellectual content;
- Final approval of the version to be published;
- Agreement to be accountable for all aspects of the work in ensuring that questions related to the accuracy or integrity of any part of the work are appropriately investigated and resolved.
In the process of submitting the article through the ScholarOne system, the corresponding author is prompted to provide further details about contributions to the article using the CRediT taxonomy. People who have contributed to the article but do not meet the full criteria for authorship should be recognised in the acknowledgements section; their contribution can be described in terms of the CRediT taxonomy.
Our default position is that the corresponding author has the authority to act on behalf of all co-authors, and we expect the corresponding author to confirm this at the beginning of the submission process.
Funding Statement
Please provide details of the sources of financial support for all authors, including grant numbers. For example, "This work was supported by the National Science Foundation (grant number XXXXXXX)". Multiple grant numbers should be separated by a comma and space, and where research was funded by more than one agency the different agencies should be separated by a semi-colon, with 'and' before the final funder. Grants held by different authors should be identified as belonging to individual authors by the authors' initials. For example, "This work was supported by the Deutsche Forschungsgemeinschaft (A.B., grant numbers XXXX, YYYY), (C.D., grant number ZZZZ); the Natural Environment Research Council (E.F., grant number FFFF); and the Australian Research Council (A.B., grant number GGGG), (E.F., grant number HHHH)".
Where no specific funding has been provided for research, please provide the following statement: "This research received no specific grant from any funding agency, commercial or not-for-profit sectors."
Conflicts of Interest Statement
Authors should include a Conflicts of Interest declaration in their manuscript.
- Conflicts of Interest are situations that could be perceived to exert an undue influence on an author’s presentation of their work. They may include, but are not limited to, financial, professional, contractual or personal relationships or situations.
- Conflicts of Interest do not necessarily mean that an author’s work has been compromised. Authors should declare any real or perceived Conflicts of Interest in order to be transparent about the context of their work.
- If the manuscript has multiple authors, the author submitting the manuscript must include Conflicts of Interest declarations relevant to all contributing authors.
- Example wording for a Conflicts of Interest declaration is as follows: “Conflicts of Interest: Author A is employed at company B. Author C owns shares in company D, is on the Board of company E and is a member of organisation F. Author G has received grants from company H.” If no Conflicts of Interest exist, the declaration should state “Conflicts of Interest: None”.
Ethics Statements
This journal follows the COPE guidelines regarding ethics and as such requires that you include an Ethics Statement detailing relevant approvals such as IRB, the ethical treatment of human and animal research participants and informed consent as appropriate to the study. Further details can be found on our Publishing Ethics Page.
Data Availability Statement
In this journal we only accept a variation of one of the data availability statements from the table below:
Status of data and materials | Example Statement |
Data openly available in a public repository, with a permanent identifier (such as a DOI) | The data that support the findings of this study are openly available in [repository name] at http://doi.org/[doi], reference number [reference number]. |
Data embargoed due to commercial restrictions | The data that support the findings of this study will be available in [repository name] at [URL / DOI link] following a [6 month] embargo from the date of publication, to allow for commercialisation of research findings. |
Data subject to third party restrictions | The data that support the findings of this study are available from [third party]. Restrictions apply to the availability of these data, which were used under licence for this study. Data are available [from the authors / at URL] with the permission of [third party]. |
Data available within the article or its supplementary materials | The authors confirm that the data supporting the findings of this study are available within the article [and/or its supplementary materials]. |
Data sharing not applicable – no new data generated | Data availability is not applicable to this article as no new data were created or analysed in this study. |
Further information about data availability statements can be found here.
We strongly recommend that all datasets, code, software tools, and other research materials are submitted to the community site to ensure these materials are easily discoverable and citable. See Community Content for more information.
References
References in text should follow the Cambridge A citation style. Find here Endnote style and find here Zotero style.
At the end of the article, references should first be listed alphabetically, with a full title of each article, and the first and last pages. Journal titles should be given in full.
Accuracy of references is the responsibility of the author(s). References must be checked against the text to ensure (a) that the spelling of authors' names and the dates given are consistent and (b) that all authors quoted in the text (in date order if more than one) are given in the reference list and vice versa.
Please note that the DOI of the cited article must be included in the reference, the correct format being: https://doi.org/10.1017/btd.2022.7
Exceptions exist for cited material that does not currently have a DOI.
See ‘Connections References’ below for an example of article citation.
Connections References
The connections references section should include all the papers you would like to have your paper linked to in the connections map. Note that you should only refer to papers published in response to the question you are addressing or the question itself. All papers need at least one connection which can be the question paper you are responding to or for example a results paper you are focusing on in an analysis or impact paper.
See below for an example of how the references should be written:
Scott, J. (2023). Living textiles. Research Directions: Biotechnology Design, 1, e6, 1-3. https://doi.org/10.1017/btd.2022.7
Policy on prior publication
When authors submit manuscripts to this journal, these manuscripts should not be under consideration, accepted for publication or in press within a different journal, book or similar entity, unless explicit permission or agreement has been sought from all entities involved. However, deposition of a preprint on the author’s personal website, in an institutional repository, or in a preprint archive shall not be viewed as prior or duplicate publication. Authors should follow the Cambridge University Press Preprint Policy regarding preprint archives and maintaining the version of record.
Overleaf
Overleaf is a free online tool for writing and submitting scholarly manuscripts. An Overleaf template is available for this journal, which allows authors to easily comply with the journal’s guidelines.
Benefits of using Overleaf include:
- An intuitive interface, in which authors can write in LaTeX or rich text and see a preview of their article typeset in the journal’s style
- Features enabling collaboration with co-authors (the ability to share, highlight and comment on versions of articles)
- Sophisticated version control
- Clean PDF conversion and submission into the journal’s online manuscripts system (supporting materials can also be added during this process)
Overleaf is based on LaTeX but includes a rich text mode. An author writing in Overleaf would need to have some knowledge of LaTeX, but could collaborate through the tool with an author who is not a LaTeX expert. Overleaf’s tutorial pages include a two minute video and an introduction to LaTeX course, and Overleaf also provides support for authors using the tool.
You can access the Research Directions: Bioelectronics Overleaf template here. There is a direct link to submit your manuscript from within the Overleaf authoring environment. Once you have completed writing your article, please use the "Submit to Journal" button and select the link for Research Directions: Bioelectronics to be directed to the journal's submission system.
English language editing services
Authors, particularly those whose first language is not English, may wish to have their English-language manuscripts checked by a native speaker before submission. This step is optional, but may help to ensure that the academic content of the paper is fully understood by the Editor and any reviewers.
In order to help prospective authors to prepare for submission and to reach their publication goals, Cambridge University Press offers a range of high-quality manuscript preparation services – including language editing – delivered in partnership with American Journal Experts. You can find out more on our Language Services page.
Please note that the use of any of these services is voluntary, and at the author's own expense. Use of these services does not guarantee that the manuscript will be accepted for publication, nor does it restrict the author to submitting to a Cambridge-published journal.
Seeking permissions for copyrighted material
Please see further guidance here.
Author affiliations
Author affiliations should represent the institution(s) at which the research presented was conducted and/or supported and/or approved. For non-research content, any affiliations should represent the institution(s) with which each author is currently affiliated.
For more information, please see our author affiliation policy and author affiliation FAQs.
Use of artificial intelligence (AI) tools
We acknowledge the increasing use of artificial intelligence (AI) tools in the research and writing processes. To ensure transparency, we expect any such use to be declared and described fully to readers, and to comply with our plagiarism policy and best practices regarding citation and acknowledgements. We do not consider artificial intelligence (AI) tools to meet the accountability requirements of authorship, and therefore generative AI tools such as ChatGPT and similar should not be listed as an author on any submitted content.
In particular, any use of an AI tool:
- to generate images within the manuscript should be accompanied by a full description of the process used, and declared clearly in the image caption(s)
- to generate text within the manuscript should be accompanied by a full description of the process used, include appropriate and valid references and citations, and be declared in the manuscript’s Acknowledgements.
- to analyse or extract insights from data or other materials, for example through the use of text and data mining, should be accompanied by a full description of the process used, including details and appropriate citation of any dataset(s) or other material analysed in all relevant and appropriate areas of the manuscript
- must not present ideas, words, data, or other material produced by third parties without appropriate acknowledgement or permission
Descriptions of AI processes used should include at minimum the version of the tool/algorithm used, where it can be accessed, any proprietary information relevant to the use of the tool/algorithm, any modifications of the tool made by the researchers (such as the addition of data to a tool’s public corpus), and the date(s) it was used for the purpose(s) described. Any relevant competing interests or potential bias arising as a consequence of the tool/algorithm’s use should be transparently declared and may be discussed in the article.