Online Wear Detection Using High-Speed Imaging

Seyfollah Soleimani; Jacob Sukumaran; Koen Douterloigne; Patrick De Baets; Wilfried Philips

doi:10.1017/S1431927616011387

Online Wear Detection Using High-Speed Imaging

Published online by Cambridge University Press: 12 August 2016

Patrick De Baets and

Seyfollah Soleimani*: Affiliation:
Department of Computer Engineering, Faculty of Engineering, Arak University, Arak 38156-8-8349, Iran
Jacob Sukumaran: Affiliation:
Ghent University, Laboratory Soete, Technologiepark, Zwijnaarde 903, B-9052 Gent, Belgium
Koen Douterloigne: Affiliation:
Ghent University iMinds-Telin-IPI, St-Pietersnieuwstraat 41, B-9000 Gent, Belgium
Patrick De Baets: Affiliation:
Ghent University, Laboratory Soete, Technologiepark, Zwijnaarde 903, B-9052 Gent, Belgium
Wilfried Philips: Affiliation:
Ghent University iMinds-Telin-IPI, St-Pietersnieuwstraat 41, B-9000 Gent, Belgium Senior member of IEEE
*: *Corresponding author. [email protected]

Article contents

Abstract
References

Get access

Abstract

In this paper, the change detection of a fast turning specimen is studied at micro-level, whereas the images are acquired without stopping the rotation. In the beginning of the experiment, the imaging system is focused on the surface of the specimen. By starting the rotation of the specimen, the diameter of the specimen changes due to wear, which results in de-focusing of the imaging system. So the amount of blur in the images can be used as evidence of the wear phenomenon. Due to the properties of the microscope, the corners of the frames were dark and had to be cropped. So, each micrograph reflects only a small area of the surface. Nevertheless, techniques like stitching of multiple images can provide a significant surface area for micro-level investigation which increases the effectiveness of analyzing the material modification. Based on the results computer vision could detect a change of about 1.2 µm in the diameter of the specimen. More important is that we could follow the same locations of the surface in the microscopic images despite blurring, uneven illumination, change on the surface, and relatively a high-speed rotation.

Keywords

Rolling-sliding optical microscopy micro-scale abrasion surface analysis

Type: Materials Applications
Information: Microscopy and Microanalysis , Volume 22 , Issue 4 , August 2016 , pp. 820 - 840

DOI: https://doi.org/10.1017/S1431927616011387 [Opens in a new window]
Copyright: © Microscopy Society of America 2016

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Aharoni, S. (1973). Wear of polymers by roll-formation. Wear 25(3), 309–327.CrossRef Google Scholar

Al-Kindi, G. & Shirinzadeh, B. (2007). An evaluation of surface roughness parameters measurement using vision-based data. Int J Mach Tool Manu 47(3), 697–708.CrossRef Google Scholar

Alshibli, K.A. & Alsaleh, M. (2004). Characterizing surface roughness and shape of sands using digital microscopy. ASCE, J Comput Civ Eng 18(1), 36–45.CrossRef Google Scholar

Artyushkova, K., Svitlana, P., Madhu, D. & Plamen, A. (2012). Use of digital image processing of microscopic images and multivariate analysis for quantitative correlation of morphology, activity and durability of electrocatalysts. RSC Adv 2, 4304–4310.CrossRef Google Scholar

Bayer, R.G. (2004). Mechanical Wear Fundamentals and Testing, Revised and Expanded. New York: CRC Press.CrossRef Google Scholar

Benabdallah, H. (1997). Reciprocating sliding friction and contact stress of some thermoplastics against steel. J Mater Sci 32(19), 5069–5083.CrossRef Google Scholar

DeVoe, D., Knox, L. & Zhang, G. (1992). An experimental study of surface roughness assessment using image processing. Technical report. Systems Research Center, University of Maryland, College Park.Google Scholar

Dhanasekar, B. & Ramamoorthy, B. (2008). Assessment of surface roughness based on super resolution reconstruction algorithm. Int J Adv Manuf Tech 35(11), 1191–1205.CrossRef Google Scholar

Gaudreau-Balderrama, A. (2012). Multi-Modal Image Registration. Boston: Boston University.Google Scholar

Kano, S., Homma, H., Sasaki, S. & Shimura, H. (2008). In situ monitoring of friction surfaces and their sequence pattern analysis. Philos Trans A Math Phys Eng Sci 366(1865), 665–671.Google Scholar PubMed

Kano, S. & Suzuki, T. (2009). In-situ monitoring of friction surfaces and friction modelling by surface pattern analysis. Wear 267(5), 1075–1079.CrossRef Google Scholar

Kiran, M., Ramamoorthy, B. & Radhakrishnan, V. (1998). Evaluation of surface roughness by vision system. Int J Mach Tool Manu 38(5), 685–690.CrossRef Google Scholar

Kumar, R., Kulashekar, P., Dhanasekar, B. & Ramamoorthy, B. (2005). Application of digital image magnification for surface roughness evaluation using machine vision. Int J Mach Tool Manu 45(2), 228–234.CrossRef Google Scholar

Ledda, A. (2006). Mathematical morphology in image processing. PhD thesis, Ghent University, Ghent, Belgium.Google Scholar

Lee, B., Yu, S. & Juan, H. (2004). The model of surface roughness inspection by vision system in turning. Mechatronics 14(1), 129–141.CrossRef Google Scholar

Maes, F., Collignon, A., Vandermeulen, D., Marchal, G. & Suetens, P. (1997). Multimodality image registration by maximization of mutual information. IEEE Trans Med Imaging 16(2), 187–198.CrossRef Google Scholar PubMed

Raadnui, S. (2005). Wear particle analysis—utilization of quantitative computer image analysis: a review. Tribol Int 38(10), 871–878.CrossRef Google Scholar

Rymuza, Z. (2007). Tribology of polymers. Arch Civ Mech Eng 7(4), 177–184.CrossRef Google Scholar

Soleimani, S. (2014). Computer vision system for wear analysis. PhD thesis, Ghent University, Ghent, Belgium.Google Scholar

Soleimani, S., Rooms, F. & Philips, W. (2013). Efficient blur estimation using multi-scale quadrature filters. Signal Processing 93(7), 1988–2002.CrossRef Google Scholar

Soleimani, S., Sukumaran, J.P., Douterloigne, K., Rooms, F., Philips, W. & De Baets, P. (2012). Correction, stitching and blur estimation of micro-graphs obtained at high speed. In Advanced Concepts for Intelligent Vision Systems, Blanc-Talon, J., Philips, W., Popescu, D., Scheunders, P. & Zemcik, P. (Eds.), pp. 84–95. Berlin Heidelberg: Springer.CrossRef Google Scholar

Sukumaran, J. (2011). Roll-slip phenomenon of polymer composites: online analysis assisted by computer vision. In 12th FEA PhD Symposium, Faculty of Engineering and Architecture, Ghent University, Ghent, Belgium.Google Scholar

Sukumaran, J. (2014). Vision assisted tribolography of rolling-sliding contact pf polymer-steel pairs. PhD thesis, Ghent University, Ghent, Belgium.Google Scholar

Sukumaran, J., Soleimani, S., De Baets, P., Rodriguez, V., Douterloigne, K., Philips, W. & Ando, M. (2012). High-speed imaging for online micrographs of polymer composites in tribological investigation. Wear 296, 702–712.CrossRef Google Scholar

Tasan, Y., De Rooij, M. & Schipper, D. (2005). Measurement of wear on asperity level using image-processing techniques. Wear 258(1), 83–91.CrossRef Google Scholar

Thévenaz, P. & Unser, M. (2000). Optimization of mutual information for multi-resolution image registration. IEEE Trans Image Process 9, 2083–2099.Google Scholar

Vaziri, M., Spurr, R. & Stott, F. (1988). An investigation of the wear of polymeric materials. Wear 122(3), 329–342.CrossRef Google Scholar

Ville, O. & Heikkila, J. (2007). Image registration using blur-invariant phase correlation. IEEE Signal Process Lett 14(7), 449–452.Google Scholar

Wang, W., Wong, P. & Zhang, Z. (2000). Experimental study of the real time change in surface roughness during running-in for pehl contacts. Wear 244, 140–146.CrossRef Google Scholar

Supplementary Video

File 32.9 KB

Soleimani supplementary material S21

Supplementary Video

File 142.5 KB

Article contents

Online Wear Detection Using High-Speed Imaging

Abstract

Keywords

Access options

References

Soleimani supplementary material S1

Soleimani supplementary material S2

Soleimani supplementary material S3

Soleimani supplementary material S4

Soleimani supplementary material S5

Soleimani supplementary material S6

Soleimani supplementary material S7

Soleimani supplementary material S8

Soleimani supplementary material S9

Soleimani supplementary material S10

Soleimani supplementary material S11

Soleimani supplementary material S12

Soleimani supplementary material S13

Soleimani supplementary material S14

Soleimani supplementary material S15

Soleimani supplementary material S16

Soleimani supplementary material S17

Soleimani supplementary material S18

Soleimani supplementary material S19

Soleimani supplementary material S20

Soleimani supplementary material S21

Save article to Kindle

Save article to Dropbox

Save article to Google Drive

Reply to: Submit a response

Your details

You have entered the maximum number of contributors

Conflicting interests