The aerodynamics and acoustics of a generic coaxial helicopter with a stiff main rotor system and a tail-mounted propulsor are investigated using Brown’s Vorticity Transport Model. In particular, the model is used to capture the aerodynamic interactions that arise between the various components of the configuration. By comparing the aerodynamics of the full configuration of the helicopter to the aerodynamics of various combinations of its sub-components, the influence of these aerodynamic interactions on the behaviour of the system can be isolated. Many of the interactions follow a simple relationship between cause and effect. For instance, ingestion of the main rotor wake produces a direct effect on the unsteadiness in the thrust produced by the propulsor. The causal relationship for other interdependencies within the system is found to be more obscure. For instance, a dependence of the acoustic signature of the aircraft on the tailplane design originates in the changes in loading on the main rotor that arise from the requirement to trim the load on the tailplane that is induced by its interaction with the main rotor wake. The traditional approach to the analysis of interactional effects on the performance of the helicopter relies on characterising the system in terms of a network of possible interactions between the separate components of its configuration. This approach, although conceptually appealing, may obscure the closed-loop nature of some of the aerodynamic interactions within the helicopter system. It is suggested that modern numerical simulation techniques may be ready to supplant any overt reliance on this reductionist type approach and hence may help to forestall future repetition of the long history of unforeseen, interaction-induced dynamic problems that have arisen in various new helicopter designs.

This paper presents a summary of the principles and processes used to design a ski-jump ramp profile for the UK’s Future Aircraft Carrier (CVF) optimised for the Joint Strike Fighter (JSF).

The paper includes an overview of the CVF and JSF programs, a history and summary of the ski-jump ramp and the principles of its use in the shipborne Short Take-Off (STO) manoeuvre.

The paper discusses the importance of defining optimisation boundaries including specified objectives, aircraft configurations and environmental conditions. It then demonstrates the process of balancing the design drivers of air vehicle performance and landing gear loads to achieve an optimum profile. Comparisons are made between the proposed candidate CVF ramp profile and the current in service ski-jump design as designed for the Harrier family of aircraft.

The paper briefly covers some of the important issues and factors that have been experienced when a theoretical profile is translated into a physical ramp fitted to a ship, principally the effects on aircraft operations due to build and in-service variation from the nominal profile.

Recent developments in the field of Mini-UAVs lead to successful designs in both hovering rotorcraft and fixed wing aircraft. However, a polyvalent MAV capable of stable hovering and fast forward flight is still expected. A promising candidate for such versatile missions consists of a tilt-body tail-sitter configuration. That concept is studied in this paper both from the flight mechanics and control points of view. Developments are based on an existing prototype called Vertigo. It consists of a tail sitter fixed-wing mini-UAV equipped with a contra-rotating pair of propellers in tractor configuration.

A wind-tunnel campaign was carried out to extract experimental results from the Vertigo aerodynamic characteristics. A 6-component sting balance was fitted in the powered model enabling excursion in angles of attack and sideslip angles up to 90°. Thus, a detailed understanding of the transition mechanism could be obtained. An analytical model including propwash effects was derived from experimental results.

The analytical model was used to compute stability modes for specific flight conditions. This allowed an appropriate design of the autopilot capable of stabilisation and control over the whole flight envelope. A gain sequencing technique was chosen to ensure stability while minimising control loop execution time. A MATLAB-based flight simulator including an analytical model for the propeller slipstream has been developed in order to test the validity of airborne control loops.

Simulation results are presented in the paper including hover flight, forward flight and transitions. Flight tests lead to successful inbound and outbound transitions of the Vertigo.

This paper aims to demonstrate the viability of using the large eddy simulation (LES) CFD methodology to model a representative, complete STOVL aircraft geometry at touch down. The flowfield beneath such a jet-borne vertical landing aircraft is inherently unsteady. Hence, it is argued in the present work that the LES technique is the most suitable tool to predict both the mean flow and unsteady fluctuations, and, with further development and validation testing, this approach could be a replacement, and certainly a complementary aid, to expensive rig programmes. The numerical method uses a compressible solver on a mixed element unstructured mesh. Examination of instantaneous flowfield predictions from these LES calculations indicate close similarity with many flow features identified from ground effect flow visualisations, which are well known to be difficult to model using RANS-based CFD. Whilst significant further work needs to be carried out, these calculations show that LES could be a practical tool to model, for example, Hot Gas Ingestion for the Joint Strike Fighter aircraft.

This paper describes the market for air vehicles that offer Very Short Take Off and Landing (VSTOL) capabilities, also known as VSTOL aircraft. A commercial VSTOL aircraft will only succeed if it provides profits to both manufacturers and airlines. Being able to operate out of shorter fields offers airlines greater flexibility and therefore provides a benefit to the airline. However, adding VSTOL performance also adds cost. Successful VSTOL aircraft designs must balance the added cost against the additional benefits VSTOL performance will provide.

The first problem in any new VSTOL design is determining what field length provides the maximum benefit relative to cost. In order to be able to determine this one needs to know not only what it will cost to design and build the new aircraft, but its value to the airlines, as reflected by the demand for it and the price they are willing to pay. Only then is it possible to design the aeroplane the market wants at a sustainable price and in sufficient quantities to optimise the manufacturer’s return on investment.

This paper is a comprehensive parametric analysis of helicopters and aeroplanes that shows how much the market values short field performance by determining how much airline customers have been paying for it and how the market reacts to changes in its price. The analysis simultaneously considers over 230 currently produced models of fixed wing and rotary commercial aircraft, ranging in size from a Cessna 172 to an Airbus A380 and with balanced field lengths ranging from less than 150 to over 10,500ft.

The data show that a single, statistically significant demand curve exists for all of these vehicles, with prices that range across several orders of magnitude. This curve consists of several segments or sub-markets including those for regional and rotary wing aircraft. Both of those markets offer vehicles over a wide range of prices. The analysis shows that VSTOL price is a function of the balanced field length provided by the vehicles within these market segments. Comparing demand and sustained price against cost reveals particular field lengths for which it will be possible to make a profit building VSTOL aircraft.

Because the sustained price for a VSTOL aircraft is a function of its field length performance, and the quantity of a model sold is a function of its price, it follows that it is possible to predict the profit potential for a given VSTOL design in advance of its development. A thorough study of potential configurations therefore offers manufacturers the ability to design VSTOL aircraft that provide the maximum possible profit while fully satisfying the requirements of their airline customers.

Short take-off and landing (STOL) systems can offer significant capabilities to warfighters and, for civil operators thriving on maximising efficiencies they can improve airspace use while containing noise within airport environments. In order to provide data for next generation systems, a wind tunnel test of an all-wing cruise efficient, short take-off and landing (CE STOL) configuration was conducted in the National Aeronautics and Space Administration (NASA) Langley Research Center (LaRC) 14ft by 22ft Subsonic Wind Tunnel. The test’s purpose was to mature the aerodynamic aspects of an integrated powered lift system within an advanced mobility configuration capable of CE STOL. The full-span model made use of steady flap blowing and a lifting centerbody to achieve high lift coefficients. The test occurred during April through June of 2007 and included objectives for advancing the state-of-the-art of powered lift testing through gathering force and moment data, on-body pressure data, and off-body flow field measurements during automatically controlled blowing conditions. Data were obtained for variations in model configuration, angles of attack and sideslip, blowing coefficient, and height above ground. The database produced by this effort is being used to advance design techniques and computational tools for developing systems with integrated powered lift technologies.

The interaction of multiple jets with the ground is of great importance for the design and operation of short take-off, vertical landing aircraft. The fountain upwash flow, generated by the impingement of two axisymmetric, compressible, turbulent jets onto a ground plane was studied using laser-based particle image velocimetry and laser Doppler velocimetry. Measurements were made with nozzle pressure ratios of between 1·05 and 4, nozzle height-to-diameter ratios of between 2·4 and 8·4, nozzle splay angles of between ±15 degrees and a nozzle spacing-to-diameter ratio of seven. The effect of varying these parameters on the fountain velocity decay, spreading rate and momentum flux ratio are discussed. Mean fountain upwash velocity profiles were found to be self-similar for all test conditions. A distinct frequency of fountain oscillation was identified but only at a nozzle height of 4·4 diameters.

This paper presents the highlights of the F-35 STOVL Jet Effects (SJE) test effort during the complete four years of the System Development and Demonstration phase. A new 12%-scale F-35 SJE model was tested in the German-Dutch wind-tunnels Large Low Speed Facility in order to gather STOVL jet-induced Forces and Moments. Ten separate test entries were conducted, covering all STOVL flight regimes from pure hover in ground effect through transition to wing borne flight. This paper will present an overview of this program, including a detailed description of the wind-tunnel model, testing techniques, test conditions, and accomplishments.