A model-based modification (SIBTEST) of the standardization index based upon a multidimensional IRT bias modeling approach is presented that detects and estimates DIF or item bias simultaneously for several items. A distinction between DIF and bias is proposed. SIBTEST detects bias/DIF without the usual Type 1 error inflation due to group target ability differences. In simulations, SIBTEST performs comparably to Mantel-Haenszel for the one item case. SIBTEST investigates bias/DIF for several items at the test score level (multiple item DIF called differential test functioning: DTF), thereby allowing the study of test bias/DIF, in particular bias/DIF amplification or cancellation and the cognitive bases for bias/DIF.

Several concepts are introduced and defined: measurement invariance, structural bias, weak measurement invariance, strong factorial invariance, and strict factorial invariance. It is shown that factorial invariance has implications for (weak) measurement invariance. Definitions of fairness in employment/admissions testing and salary equity are provided and it is argued that strict factorial invariance is required for fairness/equity to exist. Implications for item and test bias are developed and it is argued that item or test bias probably depends on the existence of latent variables that are irrelevant to the primary goal of test constructers.

The standard tobit or censored regression model is typically utilized for regression analysis when the dependent variable is censored. This model is generalized by developing a conditional mixture, maximum likelihood method for latent class censored regression. The proposed method simultaneously estimates separate regression functions and subject membership in K latent classes or groups given a censored dependent variable for a cross-section of subjects. Maximum likelihood estimates are obtained using an EM algorithm. The proposed method is illustrated via a consumer psychology application.

Points of view analysis (PVA), proposed by Tucker and Messick in 1963, was one of the first methods to deal explicitly with individual differences in multidimensional scaling, but at some point was apparently superceded by the weighted Euclidean model, well-known as the Carroll and Chang INDSCAL model. This paper argues that the idea behind points of view analysis deserves new attention, especially as a technique to analyze group differences. A procedure is proposed that can be viewed as a streamlined, integrated version of the Tucker and Messick Process, which consisted of a number of separate steps. At the same time, our procedure can be regarded as a particularly constrained weighted Euclidean model. While fitting the model, two types of nonlinear data transformations are feasible, either for given dissimilarities, or for variables from which the dissimilarities are derived. Various applications are discussed, where the two types of transformation can be mixed in the same analysis; a quadratic assignment framework is used to evaluate the results.

In the present paper a model for describing dynamic processes is constructed by combining the common Rasch model with the concept of structurally incomplete designs. This is accomplished by mapping each item on a collection of virtual items, one of which is assumed to be presented to the respondent dependent on the preceding responses and/or the feedback obtained. It is shown that, in the case of subject control, no unique conditional maximum likelihood (CML) estimates exist, whereas marginal maximum likelihood (MML) proves a suitable estimation procedure. A hierarchical family of dynamic models is presented, and it is shown how to test special cases against more general ones. Furthermore, it is shown that the model presented is a generalization of a class of mathematical learning models, known as Luce's beta-model.

Samejima has recently given an approximation for the bias function for the maximum likelihood estimate of the latent trait in the general case where item responses are discrete, generalizing Lord's bias function in the three-parameter logistic model for the dichotomous response level. In the present paper, observations are made about the behavior of this bias function for the dichotomous response level in general, and also with respect to several widely used mathematical models. Some empirical examples are given.

A multidimensional unfolding model is developed that assumes that the subjects can be clustered into a small number of homogeneous groups or classes. The subjects that belong to the same group are represented by a single ideal point. Since it is not known in advance to which group or class a subject belongs, a mixture distribution model is formulated that can be considered as a latent class model for continuous single stimulus preference ratings. A GEM algorithm is described for estimating the parameters in the model. The M-step of the algorithm is based on a majorization procedure for updating the estimates of the spatial model parameters. A strategy for selecting the appropriate number of classes and the appropriate number of dimensions is proposed and fully illustrated on some artificial data. The latent class unfolding model is applied to political science data concerning party preferences from members of the Dutch Parliament. Finally, some possible extensions of the model are discussed.

It has long been part of the item response theory (IRT) folklore that under the usual empirical Bayes unidimensional IRT modeling approach, the posterior distribution of examinee ability given test response is approximately normal for a long test. Under very general and nonrestrictive nonparametric assumptions, we make this claim rigorous for a broad class of latent models.

Takane, Young, and de Leeuw proposed a procedure called FACTALS for the analysis of variables of mixed measurement levels (numerical, ordinal, or nominal). Mooijaart pointed out that their algorithm does not necessarily converge, and Nevels proposed a new algorithm for the case of nominal variables. In the present paper it is shown that Nevels' procedure is incorrect, and a new procedure for handling nominal variables is proposed. In addition, a procedure for handling ordinal variables is proposed. Using these results, a monotonically convergent algorithm is constructed for FACTALS of any mixture of variables.

An implementation of the Gauss-Newton algorithm for the analysis of covariance structures that is specifically adapted for high-level computer languages is reviewed. With this procedure one need only describe the structural form of the population covariance matrix, and provide a sample covariance matrix and initial values for the parameters. The gradient and approximate Hessian, which vary from model to model, are computed numerically. Using this approach, the entire method can be operationalized in a comparatively small program. A large class of models can be estimated, including many that utilize functional relationships among the parameters that are not possible in most available computer programs. Some examples are provided to illustrate how the algorithm can be used.

The stochastic subject formulation of latent trait models contends that, within a given subject, the event of obtaining a certain response pattern may be probabilistic. Ordinary latent trait models do not imply that these within-subject probabilities are identical to the conditional probabilities specified by the model. The latter condition is called local homogeneity. It is shown that local homogeneity is equivalent to subpopulation invariance of the model. In case of the monotone IRT model, local homogeneity implies absence of item bias, absence of item specific traits, and the possibility to join overlapping subtests. The following characterization theorem is proved: the homogeneous monotone IRT model holds for a finite or countable item pool if and only if the pool is experimentally independent and pairwise nonnegative association holds in every positive subpopulation.

This paper discusses rowwise matrix correlation, based on the weighted sum of correlations between all pairs of corresponding rows of two proximity matrices, which may both be square (symmetric or asymmetric) or rectangular. Using the correlation coefficients usually associated with Pearson, Spearman, and Kendall, three different rowwise test statistics and their normalized coefficients are discussed, and subsequently compared with their nonrowwise alternatives like Mantel's Z. It is shown that the rowwise matrix correlation coefficient between two matrices X and Y is the partial correlation between the entries of X and Y controlled for the nominal variable that has the row objects as categories. Given this fact, partial rowwise correlations (as well as multiple regression extensions in the case of Pearson's approach) can be easily developed.

A probabilistic choice model is developed for paired comparisons data about psychophysical stimuli. The model is based on Thurstone's Law of Comparative Judgment Case V and assumes that each stimulus is measured on a small number of physical variables. The utility of a stimulus is related to its values on the physical variables either by means of an additive univariate spline model or by means of multivariate spline model. In the additive univariate spline model, a separate univariate spline transformation is estimated for each physical dimension and the utility of a stimulus is assumed to be an additive combination of these transformed values. In the multivariate spline model, the utility of a stimulus is assumed to be a general multivariate spline function in the physical variables. The use of B splines for estimating the transformation functions is discussed and it is shown how B splines can be generalized to the multivariate case by using as basis functions tensor products of the univariate basis functions. A maximum likelihood estimation procedure for the Thurstone Case V model with spline transformation is described and applied for illustrative purposes to various artificial and real data sets. Finally, the model is extended using a latent class approach to the case where there are unreplicated paired comparisons data from a relatively large number of subjects drawn from a heterogeneous population. An EM algorithm for estimating the parameters in this extended model is outlined and illustrated on some real data.

A reparameterization is formulated that yields estimates of scale-invariant parameters in recursive path models with latent variables, and (asymptotically) correct standard errors, without the use of constrained optimization. The method is based on the logical structure of the reticular action model.

Methods for comparing means are known to be highly nonrobust in terms of Type II errors. The problem is that slight shifts from normal distributions toward heavy-tailed distributions inflate the standard error of the sample mean. In contrast, the standard error of various robust measures of location, such as the one-step M-estimator, are relatively unaffected by heavy tails. Wilcox recently examined a method of comparing the one-step M-estimators of location corresponding to two independent groups which provided good control over the probability of a Type I error even for unequal sample sizes, unequal variances, and different shaped distributions. There is a fairly obvious extension of this procedure to pairwise comparisons of more than two independent groups, but simulations reported here indicate that it is unsatisfactory. A slight modification of the procedure is found to give much better results, although some caution must be taken when there are unequal sample sizes and light-tailed distributions. An omnibus test is examined as well.

A general model for two-level multivariate data, with responses possibly missing at random, is described. The model combines regressions on fixed explanatory variables with structured residual covariance matrices. The likelihood function is reduced to a form enabling computational methods for estimating the model to be devised.

Rubin's “multiple imputation” approach to missing data creates synthetic data sets, in which each missing variable is replaced by a draw from its predictive distribution, conditional on the observed data. By construction, analyses of such filled-in data sets as if the imputations were true values have the correct expectations for population parameters. In a recent paper, Mislevy showed how this approach can be applied to estimate the distributions of latent variables from complex samples. Multiple imputations for a latent variable bear a surface similarity to classical “multiple indicators” of a latent variable, as might be addressed in structural equation modelling or hierarchical modelling of successive stages of random sampling. This note demonstrates with a simple example why analyzing “multiple imputations” as if they were “multiple indicators” does not generally yield correct results; they must instead be analyzed by means concordant with their construction.

A class of models for gamma distributed random variables is presented. These models are shown to be more flexible than the classical linear models with respect to the structure that can be imposed on the expected value. In particular, both additive, multiplicative, and combined additive-multiplicative models can be formulated. As a special case, a class of psychometric models for reaction times is presented, together with their psychological interpretation. By means of a comparison with existing models, this class of models is shown to offer some possibilities that are not available in existing methods. Parameter estimation by means of maximum likelihood (ML) is shown to have some attractive properties, since the models belong to the exponential family. Then, the results of a simulation study of the bias in the ML estimates are presented. Finally, the application of these models is illustrated by an analysis of the data from a mental rotation experiment. This analysis is preceded by an evaluation of the appropriateness of the gamma distribution for these data.

Probabilistic models of same-different and identification judgments are compared (within each paradigm) with regard to their sensitivity to perceptual dependence or the degree to which the underlying psychological dimensions are correlated. Three same-different judgment models are compared. One is a step function or decision bound model and the other two are probabilistic variants of a similarity model proposed by Shepard. Three types of identification models are compared: decision bound models, a probabilistic multidimensional scaling model, and probabilistic models based on the Shepard-Luce choice rule. The decision bound models were found to be most sensitive to perceptual dependence, especially when there is considerable distributional overlap. The same-different model based on the city-block metric and an exponential decay similarity function, and the corresponding identification model were found to be particularly insensitive to perceptual dependence. These results suggest that if a Shepard-type similarity function accurately describes behavior, then under typical experimental conditions it should be difficult to see the effects of perceptual dependence. This result provides strong support for a perceptual independence assumption when using these models. These theoretical results may also play an important role in studying different decision rules employed at different stages of identification training.

Five different ability estimators—maximum likelihood [MLE (θ)], weighted likelihood [WLE (θ)], Bayesian modal [BME (θ)], expected a posteriori [EAP (θ)] and the standardized number-right score [Z (θ)]—were used as scores for conventional, multiple-choice tests. The bias, standard error and reliability of the five ability estimators were evaluated using Monte Carlo estimates of the unknown conditional means and variances of the estimators. The results indicated that ability estimates based on BME (θ), EAP (θ) or WLE (θ) were reasonably unbiased for the range of abilities corresponding to the difficulty of a test, and that their standard errors were relatively small. Also, they were as reliable as the old standby—the number-right score.