Greenhouse studies were conducted from 2020 to 2021 to evaluate the effect of simulated drift rates of 2,4-D and dicamba on strawberry growth, fruit development and fruit quality in Raleigh, NC. Treatments included 2,4-D choline and dicamba DGA plus Vapor Grip at 1/2x, 1/20x, and 1/200x of the 1x field rate of 1.09 and 0.8 kg ae ha-1, respectively. Treatments were applied to strawberry at three reproductive stages, including bud, flower, and fruit. Averaged across both herbicides, strawberry canopy size was reduced by the 1/2x rate 18, 25, 30, and 36% at 3, 6, 9, and 11 wk after treatment (WAT). The 1/2x rate of both herbicides caused greater injury to strawberry than the 1/20x or 1/200x, with maximum stunting from 2,4-D and dicamba of 54 and 36%, respectively. Fruit pH and SSC increased due to the 1/2x rate of dicamba compared to the 1/20x and 1/200x rates and the nontreated. Treated fruit (across all herbicides) were larger than fruit developing following herbicide application to flowers or buds but were similar to nontreated fruit.

Allohexaploid wheat (Triticum aestivum L.) is tolerant to halauxifen-methyl (HM) via rapid detoxification of the phytotoxic form of HM, halauxifen acid (HA), to non-phytotoxic metabolites. Previous research utilizing ‘Chinese Spring’ (CS) wheat, alien substitution (i.e., endogenous chromosome pair substituted with a homoeologous pair from diploid Sears’ goatgrass (Aegilops searsii M. Feldman & M. Kislev) (AS), or nullisomic-tetrasomic (NT) lines indicated plants lacking chromosome 5A are more sensitive than CS to HM. We hypothesized the increased HM sensitivity of these plants results from losing gene(s) on chromosome 5A associated with HA metabolism, which leads to a reduced HA detoxification rate relative to CS. To compare HA abundance among AS, CS, alien substitution, and NT lines during a time course, two excised-leaf studies using unlabeled HM and liquid chromatography–mass spectrometry analyses were performed. Aegilops searsii accumulated more HA than CS did, and each substitution line at 8, 12, and 24 h after treatment (HAT). Furthermore, only the wheat substitution line lacking chromosome 5A displayed greater abundance of HA relative to CS (2.4- to 3.8-fold, depending on the time point). In contrast, HA abundances in lines possessing chromosome 5A were not different than HA abundances in CS at all time points. When NT lines were compared with CS, the nullisomic 5D-tetrasomic 5A (N5D-T5A) line displayed similar HA abundance, whereas the nullisomic 5A-tetrasomic 5D (N5A-T5D) accumulated approximately 3-fold more HA at 12 and 24 HAT. These results biochemically support the hypothesis that genes encoding HA-detoxifying enzyme(s) are located on wheat chromosome 5A and corroborate findings from previous greenhouse phenotypic experiments. Future experimentation is needed to identify and characterize genes and enzymes on wheat chromosome 5A involved with HA detoxification, which may include cytochrome P450 monooxygenases, unknown oxidases, UDP-dependent glucosyltransferases, or, potentially, transcription factors that regulate expression of these genes associated with HA detoxification.

Waterhemp [Amaranthus tuberculatus (Moq.) Sauer] is one of the most troublesome weeds in the United States. An A. tuberculatus population (CHR) was identified in Illinois, USA, as resistant to herbicides from six different site-of-action groups. Recently, the same population was also recognized as dicamba resistant. This study aimed to identify key resistance genes and the putative dicamba resistance mechanism in A. tuberculatus via transcriptomics analysis. Multiple differentially expressed (DE) genes and co-expression gene modules were identified as associated with dicamba resistance. Specifically, genes encoding glutathione S-transferases (GSTs), ATP-binding cassette transporters, peroxidases, and uridine diphosphate (UDP)-glycosyltransferases (UGTs) were identified. Results indicated enhanced oxidative stress tolerance as the primary mechanism for reducing dicamba toxicity. Results also point to potential glycosylation via UGTs and conjugation via GSTs of dicamba and its by-products. This is the first transcriptomics characterization of dicamba resistance in A. tuberculatus. Multiple non-target-site resistance genes were identified, indicating a cross-resistance pattern in the CHR population leading to a putative-enhanced oxidative stress response. Regions of multiple DE genes (i.e., genomic hot spots) across the A. tuberculatus genome corroborate previous results and potentially add to the complexity of non-target-site resistance traits.

Invasive aquatic plants constantly threaten freshwaters and associated environs globally. Water resource managers frequently seek new control tactics to combat invasive macrophytes, especially when the availability of herbicides registered for submersed plant control is limited. The synthetic auxin herbicide, florpyrauxifen-benzyl, recently registered (2018) for aquatic site applications in the United States, has shown success in controlling several invasive aquatic weeds. Studies were conducted to evaluate responses of native and invasive submersed plants to florpyrauxifen-benzyl under growth chamber conditions to provide insight on the selectivity of varying herbicide concentrations in New Zealand. Florpyrauxifen-benzyl concentrations evaluated ranged from 0.01 to 107.86 µg ai L−1, encompassing the maximum use concentration (48 µg L−1) for submersed plant applications. Dose–response metrics indicated the New Zealand native species watermilfoil [Myriophyllum triphyllum Orchard] was highly sensitive to florpyrauxifen-benzyl following a 21-d static exposure, having a dry weight 50% effective concentration (EC50) value of 1.2 µg L−1. The invasive species oxygen-weed [Lagarosiphon major (Ridley) Moss] and Canadian waterweed (Elodea canadensis Michx.) were less sensitive, with dry weight EC50 values of 35.4 and >107.86 µg L−1, respectively. Brazilian waterweed (Egeria densa Planch.) was most tolerant to the tested concentrations, as EC50 values were not achieved. Overall, results indicate florpyrauxifen-benzyl demonstrates potential for controlling L. major, with further large-scale screening required to confirm control among field site applications. As the native species (M. triphyllum) was most sensitive to florpyrauxifen-benzyl compared with the invasive plant evaluated (I/N ratio indicated >31.3 times more sensitive), any targeted concentration used for invasive plant control for field applications would likely injure the native M. triphyllum plants. Future studies should investigate additional native and invasive species for management guidance and consider how exposure times influence plant response using similar florpyrauxifen-benzyl concentrations tested in the present study.

Sugarcane infested with bermudagrass and harvested as seed cane introduces the potential for weedy propagules to reinfest fields. Research was conducted in 2018 and 2019 following sugarcane harvest for seed cane to evaluate bermudagrass management with photosystem II (PSII)- and 4-hydroxyphenylpyruvate dioxygenase (HPPD)–inhibiting herbicides applied alone or mixed with triclopyr. Combinations of diuron at 2.8 kg ha–1 with clomazone at 1.5 kg ha–1 or triclopyr at 1.1 kg ha–1 and hexazinone at 0.74 kg ha–1 with triclopyr applied early POST (EPOST) in mid-February injured bermudagrass 85% to 86%, and injury was greater than diuron or hexazinone alone (16% and 10%) in mid-March. Bermudagrass injury decreased to 45% to 56% for these combination treatments by April; however, injury differences were similar to the earlier rating. Late POST (LPOST) mid-March application of these treatments indicated similar bermudagrass injury trends when evaluated in early April. By mid-May, however, no treatment resulted in greater than 18% bermudagrass injury. Clomazone plus diuron applied LPOST resulted in 19% sugarcane injury by early April; however, all other treatments resulted in 7% sugarcane injury or less. In mid-May, a mid-April EPOST application of topramezone at 0.025 kg ha–1 plus triclopyr at 1.1 kg ha–1 resulted in 62% bermudagrass injury, which was equivalent to that observed with other topramezone rates in this combination (0.012 and 0.037 kg ha–1) (54% to 60%). Bermudagrass injury from triclopyr mixed with mesotrione (32%) or triclopyr mixed with atrazine, mesotrione, and S-metolachlor (47% to 55%) resulted in bermudagrass injury similar to that with topramezone plus triclopyr (54% to 62%). Data showed the flexibility of triclopyr when mixed with several HPPD- or PSII-inhibitor herbicides for bermudagrass management in a Louisiana sugarcane cropping system. Greater flexibility in application timing for HPPD-inhibitor herbicides than for PSII-inhibitor herbicides (diuron or hexazinone), and mixed with triclopyr, may suppress bermudagrass POST in April and May with minimal sugarcane injury.

Field trials were conducted near Lubbock, TX, in 2013, 2014, and 2015 to evaluate non–2,4-D–resistant cotton response to low rates of glyphosate plus 2,4-D choline. Cotton was treated with five rates of glyphosate plus 2,4-D choline (0.0183, 0.183, 1.83, 18.3, and 183 g ae ha−1) at two application timings (nine leaf and first bloom). These rates correspond to contamination rates of 0.0008%, 0.008%, 0.08%, 0.8%, and 8%, respectively. Visual cotton injury, boll retention, lint yield, and fiber properties were recorded. When averaged over contamination rates, visual injury after applications made to nine-leaf cotton was greater than for first-bloom cotton in three of 3 yr and yield loss was greater when applications were made to nine-leaf cotton when compared with first-bloom cotton in two of 3 yr. Averaged over application timing, lint yield in 2013, 2014, and 2015 after glyphosate plus 2,4-D choline contamination rates of 0.0008% and 0.008% were not different than that of the nontreated control, whereas contamination rates of 0.08%, 0.8%, and 8% decreased yield by 3% to 20%, 45% to 58%, and 80% to 96%, respectively. Contamination rates of 0.0008%, 0.008%, 0.08%, and 0.8% rarely affected fiber quality; however, a contamination rate of 8% frequently decreased micronaire, fiber length, fiber length uniformity, and fiber strength. This decrease in fiber quality also resulted in a reduction in cotton loan value and potential financial return. Although decreases in fiber quality parameters were not observed with the 0.8% contamination rate, significant reductions in financial return occurred due to yield loss caused by injury from glyphosate plus 2,4-D choline.

In 2017, dicamba-resistant (DR) soybean was commercially available to farmers in the United States. In August and September of 2017, a survey of 312 farmers from 60 Nebraska soybean-producing counties was conducted during extension field days or online. The objective of this survey was to understand farmers’ adoption and perceptions regarding DR soybean technology in Nebraska. The survey contained 16 questions and was divided in three parts: (1) demographics, (2) dicamba application in DR soybean, and (3) dicamba off-target injury to sensitive soybean cultivars. According to the results, 20% of soybean hectares represented by the survey were planted to DR soybean in 2017, and this number would probably double in 2018. Sixty-five percent of survey respondents own a sprayer and apply their own herbicide programs. More than 90% of respondents who adopted DR soybean technology reported significant improvement in weed control. Nearly 60% of respondents used dicamba alone or glyphosate plus dicamba for POST weed control in DR soybean; the remaining 40% added an additional herbicide with an alternative site of action (SOA) to the POST application. All survey respondents used one of the approved dicamba formulations for application in DR soybean. Survey results indicated that late POST dicamba applications (after late June) were more likely to result in injury to non-DR soybean compared to early POST applications (e.g., May and early June) in 2017. According to respondents, off-target dicamba movement resulted both from applications in DR soybean and dicamba-based herbicides applied in corn. Although 51% of respondents noted dicamba injury on non-DR soybean, 7% of those who noted injury filed an official complaint with the Nebraska Department of Agriculture. Although DR soybean technology allowed farmers to achieve better weed control during 2017 than previous growing seasons, it is apparent that off-target movement and resistance management must be addressed to maintain the viability and effectiveness of the technology in the future.

A glasshouse study was established at Louisiana State University campus in Baton Rouge, LA, to evaluate the control of fall panicum and Nealley’s sprangletop treated with florpyrauxifen-benzyl. Florpyrauxifen was applied at 30 g ai ha–1 to each grass species at the three- to four-leaf and one- to two-tiller stages of growth. At 21 d after treatment (DAT), fall panicum control was 91% when treated with florpyrauxifen at the three- to four-leaf stage, and Nealley’s sprangletop control was 78% to 82%, regardless of application timing 21 DAT. Leaf number, tiller number, plant height, and plant fresh weight were reduced when fall panicum and Nealley’s sprangletop were treated with florpyrauxifen. This information can be useful for developing weed management strategies with this herbicide for rice production, and it provides an additional mode of action to help manage and/or delay the development of herbicide-resistant weeds.

Broadleaf species escape current integrated weed management strategies in strawberry [Fragaria×ananassa (Weston) Duchesne ex Rozier (pro sp.) [chiloensis×virginiana]] production. Clopyralid is a registered POST control option, but current application timings provide suppression of only some species. Earlier clopyralid application timings may increase spray coverage to weeds at the planting hole, but strawberry plant tolerance to applications shortly after transplant is unknown. The objectives of the study were to determine the degree of clopyralid tolerance when applied to mature strawberry plants according to current management strategies, whether clopyralid absorption and translocation were involved in the tolerance response demonstrated by mature strawberry plants, and whether clopyralid could be safely applied to immature strawberry plants shortly after transplant. Clopyralid caused no damage when applied to mature strawberry plants and did not affect crop height, number of crowns, flowers, immature berries, or yield. Maximal strawberry absorption of radiolabeled clopyralid was 82% of the recovered radioactivity and reached peak (90%) absorption at 15 h. Maximal total translocation of radioactivity from the treated leaf was 17% and reached peak translocation at 52 h. Translocation was primarily to the new leaves and reproductive structures. In the early-application experiment, damage induced by clopyralid for all application timings reached 0 by 8 wk after treatment. Across all timings, maximal damage at 140 g ha−1 was 17% when applied 14 d after transplant (DATr) and 56% at 28 g ha−1 when applied at 21 DATr. Clopyralid dose did not affect the number of crowns, aboveground biomass, or yield. There was some stunting in plant height (3%) by the high labeled dose of clopyralid. Labeled dose clopyralid applications appear safe for application timings closer to strawberry transplant, though considerations of leaf cupping should be taken under consideration for label changes.

A population of buckhorn plantain with suspected resistance to 2,4-D was identified in central Indiana following 30 yr of 2,4-D–containing herbicide applications. Our objectives were to (1) confirm and quantify the level of herbicide resistance in the buckhorn plantain population using dose–response experiments and (2) find alternative herbicides that could be used to control this population. Greenhouse experiments were conducted to quantify the dose–response of resistant (R) and susceptible (S) biotypes of buckhorn plantain to both 2,4-D and triclopyr, two synthetic auxin herbicides from different chemical families. The R biotype was ≥6.2 times less sensitive to 2,4-D than the S biotype. The efficacy of triclopyr was similar on both the R and S biotypes of buckhorn plantain, suggesting the absence of cross-resistance to this herbicide. This is the first report of 2,4-D resistance in buckhorn plantain and the first report of 2,4-D resistance in turf. The resistance mechanism was limited to within a chemical family (phenoxycarboxylic acid) and did not occur across all WSSA Group 4 synthetic auxin herbicides, as the pyridinecarboxylic acid herbicides clopyralid and triclopyr and the arylpicolinate herbicide halauxifen-methyl provided control in our experiments.

The potential widespread adoption of cotton and soybean varieties with 2,4-D and dicamba resistance traits in the southeastern US will increase the risk of accidental exposure of peanut to these herbicides because of drift or application errors. When such accidents occur, growers must decide between continuing the crop and terminating it. In order to make this decision, growers need to estimate the potential yield reduction caused by 2,4-D or dicamba. Dose-response studies were conducted under field conditions in Citra and Jay, FL in 2012 and 2013 to determine peanut injury and yield reduction after exposure to 70, 140, 280, 560, and 1120 g ae ha−1 of 2,4-D or to 35, 70, 140, 280, and 560 g ae ha−1 of dicamba at 21 and 42 d after planting (DAP). Only herbicide by rate interactions were significant (P < 0.04). Dicamba caused 2 to 5 times higher peanut injury and 0.5 to 2 times higher yield reductions than 2,4-D. Injury ranged from 0 to 35% when peanut plants were treated with 2,4-D and from 20 to 78% with dicamba. The maximum yield reduction was 41% with 1,120 g ha−1 of 2,4-D and 65% with 560 g ha−1 of dicamba. Linear regression indicated that the intercept for yield reduction was 12% for 2,4-D and 23% for dicamba, and there was a 2.5% and 7.7% increase in yield reduction per additional 100 g ha−1, respectively. Although high variability was observed for the different variables, there was a positive correlation between injury and peanut yield reduction (P < 0.0001) with Pearson's Rho values ranging from 0.45 to 0.59 for 2,4-D and from 0.27 to 0.55 for dicamba, suggesting that growers can use injury data to make rough projections of yield reduction and decide if they continue their crop, especially when injury is evident.

The role of ethylene in kochia injury following the application of dicamba and other auxinic herbicides is not known. Experiments were conducted to evaluate kochia response to ethylene generated within plant tissue and to quantify ethylene emission from kochia following dicamba application to determine if ethylene production could be used to differentiate between dicamba-susceptible (S) and dicamba-resistant (R) kochia accessions. Dicamba at 0.28 kg ha−1 and fluroxypyr at 0.28 kg ha−1 caused severe stem and petiole twisting within 6 h of application, with S kochia exhibiting a greater level of epinasty than R kochia and fluroxypyr causing more epinasty than dicamba. Fluroxypyr provided similar control of S and R kochia, but dicamba provided less control of R kochia than S kochia. Ethylene evolution in S kochia from ethephon at 1.1 kg ha−1 and dicamba at 0.28 kg ha−1 was similar, approximately 70 ng (g fresh weight)−1 h−1. Elevated ethylene concentration from as much as 2 kg ha−1 ethephon did not produce epinastic symptoms or other plant response in S or R kochia. Ethylene evolution following dicamba application increased with time up to 48 h after application and with increasing dicamba rate up to 0.56 kg ha−1, which were the end points of the research. Ethylene evolution from the S accession was 2.5 times that of the R accession averaged across dicamba rates and harvest times. The greatest difference in ethylene evolution between S and R accessions occurred 24 h after treatment at 0.14 kg ha−1 dicamba, with S kochia producing ethylene at 470%, compared with R kochia.

Aminocyclopyrachlor (AMCP) is a synthetic auxin herbicide used for broadleaf weed control in pasture and rangeland. The tolerance and fate of AMCP within pertinent grass species is not well understood. Research was conducted to establish the tolerance of four grass species to AMCP application and observe their absorption, translocation, and metabolism. Results indicate that tall fescue is the most tolerant of AMCP at rates required for weed control. Bahiagrass and bermudagrass are marginally tolerant, and cogongrass is the most sensitive. Tall fescue and bahiagrass absorbed more AMCP than bermudagrass and cogongrass, but cogongrass absorption is the most rapid and complete within 2 days after treatment (DAT). Cogongrass and bermudagrass translocated the least amount out of the target area, whereas bahiagrass and tall fescue translocated the most. Radioisotope imaging revealed that tall fescue may sequester absorbed AMCP in leaf tips. This sequestering may be the basis of the greater tolerance to AMCP by tall fescue relative to the other species evaluated. No metabolism of AMCP was detected in any grass species out to 42 DAT.

Synthetic auxin herbicides are commonly used in forage, pasture, range, and turfgrass settings for dicotyledonous weed control. Aminocyclopyrachlor (AMCP) is a newly developed pyrimidine carboxylic acid with a chemical structure and mode of action similar to the pyridine carboxylic acids—aminopyralid, clopyralid, and picloram. Injury to sensitive dicotyledonous plants has been observed following exposure to monocotyledonous plant material previously treated with pyridine compounds. The absorption, translocation, and metabolism of AMCP has been documented in susceptible broadleaf weeds; however, no information is available, to our knowledge, regarding AMCP fate in tolerant Poaceae, which may serve as the vector for off-target plant injury. Based on this premise, research was conducted to characterize absorption, translocation, and metabolism of AMCP in tall fescue. 14C-AMCP was applied to single tiller tall fescue plant foliage under controlled laboratory conditions at North Carolina State University (Raleigh, NC). Radiation was quantified in leaf wash, treated leaf, foliage, crown, roots, and root exudates at 3, 12, 24, 48, 96, and 192 h after treatment (HAT). 14C-AMCP was rapidly absorbed by tall fescue, reaching 38 and 68% at 3 and 48 HAT, respectively. Translocation of 14C-AMCP was limited to the foliage, which reached maximum translocation (34%) at 96 HAT. Most of the recovered 14C-AMCP remained in the leaf wash, treated leaf, or foliage, whereas minimal radiation was detected in the crown, roots, or root exudates throughout the 192-h period. No AMCP metabolism was observed in tall fescue through the 192 HAT. These data suggest AMCP applied to tall fescue can remain bioavailable, and mishandling treated plant material could result in off-target injury.

As dicamba resistance traits become more common in agronomic crops, the potential for off-site movement also increases. Little is known of how common vegetable crops will respond to dicamba drift. The objective of this study was to evaluate the effect of dicamba and glyphosate drift on bell pepper and squash growth as a function of application timing. The treatments were arranged in a factorial design with two timings by three rates and a nontreated check. The two timings were early bloom and midbloom (during bloom when fruit were present). The three rates were glyphosate at 21 + dicamba at 14 g ha−1, glyphosate at 10 + dicamba at 7 g ha−1, and glyphosate at 7 + dicamba 5 at g ha−1. Herbicides were applied with a controlled droplet applicator calibrated to deliver 2.34 L ha−1. In squash, crop injury was 26 to 31% at 3 DAT and 48 to 65% at 17 DAT. However, no differences were measured among application timings or rates for fruit weight or number at individual harvest or season total. Bell pepper injury ranged between 0 and 8% from 3 to 17 DAT and was not significantly different than the nontreated. However, large, Fancy, marketable, and total bell pepper fruit number were greater in the nontreated than glyphosate at 21 + dicamba 14 at g ha−1 and glyphosate at 10 + dicamba at 7 g ha−1 both years. The three rates of dicamba + glyphosate had a greater number and weight of cull fruit compared to the number of fruit in the nontreated plots. The cull fruit were shorter with a flattened appearance. Leaving bell pepper fruit on the plants longer may result in small and medium fruit becoming large or Fancy grade bell pepper fruit.

Flue-cured tobacco is sensitive to foliar and soil residues of off-target synthetic auxin drift. Aminocyclopyrachlor is a newly developed synthetic auxin herbicide that may be used in right-of-way applications for broadleaf weed and brush control. Aminocyclopyrachlor is considered a reduced-risk alternative in rights-of-way compared with similar compounds because of its low application rate and volatility risk. However, no research is available on the response of field-grown, flue-cured tobacco to aminocyclopyrachlor drift exposure. Research was conducted in 2009 and 2010 at the Border Belt Tobacco Research Station in Whiteville, NC, to determine the response of ‘NC 71’ flue-cured tobacco to five simulated drift rates of aminocyclopyrachlor (0.31, 1.6, 3.1, 15.7, and 31.4 g ae ha−1) and one aminopyralid (6.1 g ae ha−1) simulated drift rates applied pretransplant incorporated, pretransplant unincorporated, 3 wk after transplant, and 6 wk after transplant. All herbicide rates and application timings caused significant visual tobacco injury, ranging from slight to severe with increasing herbicide drift rates. Tobacco plant heights and fresh weights were reduced at all application timings receiving ≥ 15.7 g ha−1 aminocyclopyrachlor and the comparative aminopyralid rate.

Turfgrass managers can reduce foliar bleaching of smooth crabgrass from mesotrione by tank-mixing triclopyr ester with applications. These tank mixtures also have potential to enhance smooth crabgrass control compared to mesotrione alone. The objectives of this research were to evaluate the influence of triclopyr on the efficacy, absorption, and translocation of mesotrione in multitiller smooth crabgrass. In field experiments, tank-mixing triclopyr at 560 or 1,120 g ae ha−1 with mesotrione at 140 g ai ha−1 applied sequentially or at 280 g ha−1 applied singly provided excellent control (> 90%) of multitiller smooth crabgrass in tall fescue. These treatments were more effective than mesotrione alone and fenoxaprop at 195 g ai ha−1 that averaged 66 and 81% control after 6 wk, respectively. Mesotrione alone at 280 g ha−1 bleached smooth crabgrass 53% at 2 wk after initial treatment (WAIT), and was 14% greater than the 140 g ha−1 treatment. Sequential treatments of the low mesotrione rate bleached smooth crabgrass 16 to 22% from 3 to 5 WAIT. Triclopyr tank mixtures reduced smooth crabgrass bleaching from mesotrione on all dates to < 5%. Tall fescue injury was not detected at any evaluation date. In laboratory experiments, smooth crabgrass reached peak foliar absorption of 14C-mesotrione at 24 and 168 h after treatment (HAT; 23% and 15%) when mesotrione was applied with triclopyr at 1,120 and 0 g ha−1, respectively. Triclopyr reduced translocation of radioactivity 12% at 72 and 168 HAT, compared to 14C-mesotrione alone. Enhanced foliar uptake of mesotrione from triclopyr tank mixtures might improve control of multitiller smooth crabgrass compared to mesotrione alone. Reduced foliar bleaching from triclopyr is associated with less translocation of mesotrione or derivatives in smooth crabgrass.