This communication presents the significance of a four-port 2×2 multiple input multiple output antenna operating in mid-band frequency for 5G handheld device application. A microstrip-fed reference truncated decagonal monopole antenna operating at 3.9 GHz and a modified split-ring resonator (SRR)-based low-pass filter that excites at a cut-off frequency of 6.5 GHz are designed. On introducing a stub line in the SRR structure, the proposed filter shows a good out-of-band rejection beyond 6.5 GHz. By integrating the filter into the reference monopole, a wideband filtering monopole with improved stopband performance is obtained. A four-port MIMO array is constructed by orthogonally positioning the antenna with a center-to-center separation of 0.25λ0. To improve isolation, a pair of inverted L-stubs of varying lengths is introduced. The closed loop formed by the interconnection of stubs enhances isolation within the frequency range of 3–3.5 GHz. The fabricated prototype fosters an impedance bandwidth of 66.67%, isolation >18.5 dB, an average suppression of 15 dB, an average peak gain >3.7 dB, envelope correlation coefficient < 0.015, Actual Diversity Gain (ADG) > 9.9 dB, Effective Diversity Gain (EDG) > 8.8 dB, and efficiency >88%. The proposed design is suitable for 5G sub-6 GHz applications such as n48, n77, n78, n79 bands, WiMAX, and LTE bands 42, 43, 46, 47, 48.

In the design of the filter antenna, the filter unit with the same structure as the radiation patch not only improves the selectivity of the band edge, but also helps to improve the in-band impedance. In this design, a compact circular monopole filtering antenna with improved sideband selectivity and in-band impedance using a circular-stub-load resonator is proposed. To obtain better sideband selection characteristics and in-band impedance characteristics, and reduce the mismatch problem caused by the introduction of the filter, a branch-loaded filter with the same resonance mode as the antenna radiation patch is designed. In addition, different shape branch loading structures of the bandpass filter are also studied. The experimental results show that when the loading unit of the filter and the radiation structure of the antenna have the same structure, both good in-band impedance characteristics and sideband selectivity characteristics can be obtained from the filter antenna. The antenna reflection coefficient bandwidth is from 3 to 11 GHz (114%), and the maximum reflection coefficient is only −15 dB, showing good in-band impedance characteristics and sideband selection characteristics. The filter antenna realizes the integration of antenna filtering without increasing the size, and the final size of the antenna is 30 × 25 mm2.

This paper presents a pattern diversity UWB antenna for Wireless Body Area Network (WBAN) communications. Pattern diversity antenna comprises two antenna elements with directional and omnidirectional patterns suitable for off-body and on-body communications respectively. Several broad-banding techniques such as Co-Planar waveguide, parasitic patches, and cavity resonant techniques are incorporated in microstrip antenna to achieve an ultra-wideband of 7.5 GHz (3.1 to 10.6 GHz) with a directional pattern. Monopole radiator topology is utilized to achieve a UWB frequency range of 2.6–10.6 GHz with an omnidirectional pattern. Pattern diversity is achieved using an orthogonal arrangement of the antenna elements in a compact size of 40 mm × 34 mm, maintaining the isolation >20 dB between the antennas. Gain varies from 2.2 to 4.6 dBi and 2.5 to 7.5 dBi for omnidirectional and directional antenna respectively. The simulated radiation efficiency for the directional antenna and the omnidirectional antenna are 74–86% and 52–66.5% respectively. The proposed design provides a good diversity performance in the entire UWB bandwidth with ECC<0.1 and a diversity gain of approximately 10 dB. SAR impact evaluated under various conditions is found to be <1.6 W/Kg for 1 gram of tissue.

Optimization of hyperparameters of artificial neural network (ANN) usually involves a trial and error approach which is not only computationally expensive but also fails to predict a near-optimal solution most of the time. To design a better optimized ANN model, evolutionary algorithms are widely utilized to determine hyperparameters. This work proposes hyperparameters optimization of the ANN model using an improved particle swarm optimization (IPSO) algorithm. The different ANN hyperparameters considered are a number of hidden layers, neurons in each hidden layer, activation function, and training function. The proposed technique is validated using inverse modeling of two meander line electromagnetic bandgap unit cells and a slotted ultra-wideband antenna loaded with EBG structures. Three other evolutionary algorithms viz. hybrid PSO, conventional PSO, and genetic algorithm are also adopted for the hyperparameter optimization of the ANN models for comparative analysis. Performances of all the models are evaluated using quantitative assessment parameters viz. mean square error, mean absolute percentage deviation, and coefficient of determination (R2). The comparative investigation establishes the accurate and efficient prediction capability of the ANN models tuned using IPSO compared to other evolutionary algorithms.

In this work, a printed ultra-wideband (UWB) antenna has been proposed exhibiting band notch characteristics. The proposed design covers the entire UWB band except for the 3.5 GHz band providing the band notch for the WiMAX band. This design consists of two-quarter elliptical patches placed symmetrically over the FR4 substrate. The elliptical shape of the patch is responsible for the UWB band achieved. The slot has been created on the optimized patch area to achieve the desired characteristics providing a notch for the WiMAX band. The slot in the patch is so perfectly designed that it gives the patch a perfect shape of butterfly wings. After designing, the proposed antenna was simulated and then fabricated. The fabricated and simulated results are in close agreement with each other which shows, the proposed UWB antenna is good enough for biomedical applications.

A compact coplanar waveguide-fed monopole antenna is presented in this paper. The proposed antenna is composed of three monopole branches. In order to achieve the miniaturization, the longest branch was bent. The antenna is printed on an FR4 dielectric substrate, having a compact size of 0.144λ0 × 0.105λ0 × 0.003λ0 at its lowest resonant frequency of 900 MHz. The multiband antenna covers five frequency bands: 820–990 MHz, 1.87–2.08 GHz, 2.37–2.93 GHz, 3.98–4.27 GHz, and 5.47–8.9 GHz, which covers the entire radio frequency identification bands (860–960 MHz, 2.4–2.48 GHz, and 5.725–5.875 GHz), Global System for Mobile Communications (GSM) bands (890–960 MHz and 1.850–1.990 GHz), WLAN bands (2.4–2.484 GHz and 5.725–5.825 GHz), WiMAX band (2.5–2.69 GHz), X-band satellite communication systems (7.25–7.75 GHz and 7.9–8.4 GHz), and sub 6 GHz in 5G mobile communication system (3.3–4.2 GHz and 4.4–5.0 GHz). Also, the antenna has good radiation characteristics in the operating band, which is nearly omnidirectional. Both the simulated and experimental results are presented and compared and a good agreement is established. The proposed antenna operates in five frequency bands with high gain and good radiation characteristics, which make it a suitable candidate in terminal devices with multiple communication standards.

This paper presents a comprehensive review of symmetrically shaped antennas in terms of antenna size, dielectric materials, resonating band, peak gain, radiation pattern, simulating tools, and their applications. In this article, flower shape, leaf shape, tree shape, fan shape, Pi shape, butterfly shape, bat shape, wearable, multiband, monopole, and fractal antennas are discussed. Further, a survey of previously reported bandwidth enhancement techniques of microstrip patch antenna like introduction of thick and lower permittivity substrate, multilayer substrate, parasitic elements, slots and notches, shorting wall, shorting pin, defected ground structure, metamaterial-based split ring resonator structure, fractal geometry, and composite right-hand/left-handed transmission line approach is presented. The physics of these techniques has been discussed in detail which is supported by circuit theory model approach.

In this work, a printed coplanar waveguide (CPW) fed single band antenna based on expanded graphite material is introduced. The proposed antenna is based on a CPW-monopole antenna with a U-shape conductor strip connected with the ground. Expanded graphite, a grade of graphene, is used as a conductor to design the uniplanar antenna over a flexible paper substrate. The antenna is designed for 2.4 GHz applications. The antenna design procedures are discussed. The material preparation and analysis are illustrated. Finally, the antenna fabrication and measurements of the reflection coefficient are discussed. The measured antenna reflection coefficient agrees with the simulated one, ensuring the antenna validity for serving the required applications. The radiation antenna parameters are discussed and simulated results from two-simulation software are included for comparison. The antenna has a simulated gain of 4 dBi and simulated efficiency of around 90% at 2.4 GHz.

In the proposed research paper, a novel compact, ultra-wideband electronically switchable dual-band omnidirectional to directional radiation pattern microstrip planar printed rectangular monopole antenna (PRMA) has been presented. The proposed antenna system has an optimum size of 0.26 λ0 × 0.28 λ0. A combination of radiators, reflectors, and two symmetrical grounds does place on the same layer of the rectangular microstrip PRMA. The frequency agility and the radiation pattern from omnidirectional to directional are achieved using two SMD PIN diodes (SMP1340-04LF). The directional radiation patterns with 180° phase shifts are achieved at the C-band frequency spectrum. The parametric study of the proposed antenna system was performed for different design parameters, and the antenna characteristics were analyzed. An antenna prototype is fabricated using the printed circuit board etching method by using RMI UV laser etching and cutting tools. The measurements of the proposed antenna are conducted in an anechoic chamber to validate the simulations. There are three states of operations due to two SMD PIN diodes being used in switching circuits. In state-I, the proposed antenna radiates at 6.185 GHz (5.275–6.6 75 GHz) in the Ф = 270° direction with a gain of 2.1 dBi, whereas in state-II, it radiates at 5.715 GHz (5.05–6.8 GHz) in the Ф = 90° direction with a gain of 2.1 dBi. In state-III, the antenna exhibits the X-band frequency with center frequency at 9.93 GHz (8.845–10.49 GHz), and the omnidirectional pattern offers a gain of 4.1 dBi. The features of the proposed antenna are suitable for high-speed wireless sensor network communication in industries such as chemical reactors in oil and gas and pharmaceuticals. It is also well suited for IoT and 5G-sub-6-GHz applications.

The design, analysis, fabrication, and testing of a four-port multiple-input multiple-output (MIMO) antenna is reported in this paper for automotive communications. The MIMO antenna is constructed using the basic antenna element exploiting a slot geometry. Two such antennas are developed on the same microwave laminate to develop a two-port MIMO antenna. Two such microwave laminates are interlocked to create the four-port MIMO scheme. The most distinct feature of the proposed architecture is that the inter-port isolation is well-taken care without the need for an external decoupling unit. The four-port MIMO antenna has an overall volume of 32 × 15 × 32 mm3. The prototype MIMO antenna is fabricated and the measurements are carried out to validate the simulation results. The antenna offers ultra-wideband (UWB) characteristics covering the frequency range of 2.8–9.5 GHz. The average boresight gain of the antenna ranges from 3.2 to 5.41 dBi with the peak gain at 8 GHz. The simulated efficiency of the antenna is greater than 73% within the operating bandwidth. The MIMO parameters such as envelope correlation coefficient, diversity gain, and mean effective gain are evaluated and presented. The appropriateness of the proposed antenna for deployment in the shark fin housing of the present-day automobiles is verified using on-car performance estimation.

A quad band antenna with good gain and omni-directional pattern is proposed in this paper. The antenna design is based on loading a conventional monopole antenna by three different resonators. The resonators are inspired from the shunt branch of composite right-/left-handed cell. The resonators have a simple structure and compact size. The control of the frequency bands can be achieved arbitrarily and hence the suggested design methodology can be generalized to any required bands. The fabricated antenna prototype is operating at 2.6, 3.35, 5.15, and 6.1 GHz with bandwidth wider than 100 MHz for each band. The antenna's operating principle and design procedures with the aid of electromagnetic full wave simulation are presented. Finally, the experimental results exhibit good agreement with the simulated ones which confirm the proposed designed methodology. The proposed monopole antenna has a patch size of 13.5 mm × 6.5 mm and the whole antenna size (including the feed line) is 35 mm × 32 mm. Compared to conventional single-band microstrip patch radiator size, the proposed quad band radiator has the size of 9, 15, 37.5, and 72.5% at relevant frequency bands.

In this paper, a solid co-planar waveguide-fed fractal metamaterial antenna is offered. The proposed design consists of Sierpinski gasket iterations and a complementary triangular split ring resonator (CTSRR) loaded underneath the substrate, which is accountable for pull off multiband uniqueness and resolve good impedance identical. In sketch to hassle multiresonant frequency band facet, these CTSRR are entrenched reverse side of the substrate. The anticipated antenna with a dense dimension of 12 × 14 × 1.6 mm3 is fabricated and tested. The testing result designates that the projected design has −10 dB of 5.72, 14.3, and 16.06 GHz, respectively, and covers 5.72 GHz wireless local area network, 14.3 GHz fixed satellite, and 16.06 GHz International Telecommunication Union (ITU) band. It has fine emission uniqueness for jointly E-plane and H-plane in all the preferred occurrence bands and produce superior performance compared with the offered antenna intend in the prose. The loaded CTSRR construction recital is validated all the way during negative permeability pulling out and assorted parametric study.

With quad-band-notched characteristic, a compact ultrawideband (UWB) multiple-input-multiple-output (MIMO) antenna is introduced in the paper. The UWB–MIMO system has two similar monopole elements and occupies 30 × 45 mm2. By inserting two L-shaped slots, CSRR and C-shaped stubs, four notched bands are achieved (3.25–3.9, 5.11–5.35, 5.5–6.06, and 7.18–7.88 GHz) to filter WiMAX, lower WLAN, upper WLAN, and X-band. Meanwhile, the isolation is obviously enhanced with three metal strips on the ground plane. Results indicate that the antenna covers UWB frequency band of 3.1 – 10.6 GHz except four rejected bands, isolation of better than −18 dB, envelope correlation coefficient of <0.02, and good radiation pattern, thus making it useful for UWB systems.

In this paper, an asymmetric coplanar strip (ACS)-fed quad-band monopole antenna for the global positioning system (GPS), wireless local area network (WLAN), and worldwide interoperability for microwave access (WiMAX) applications is proposed. It is composed of an F-shaped monopole and a partial ground plane, which are both printed on one side of a low-cost FR4 substrate with a compact volume of 40 × 20 × 1.6 mm3. By cutting an open-ended Γ-shaped slot into the F-shaped monopole, four distinct resonant modes are successfully generated. The design process, especially the geometrical configuration of the critical Γ-shaped slot is studied in detail. The proposed antenna has been fabricated and experimental results show that the −10 dB impedance bandwidth can fully cover the 1.575-GHz GPS (1.57–1.59 GHz), 2.4/5.2/5.8-GHz WLAN (2.4–2.485, 5.15–5.35, and 5.725–5.825 GHz), and 2.5/3.5/5.5-GHz WiMAX (2.50–2.69, 3.30–3.70, and 5.25–5.85 GHz) applications with nearly omni-directional radiation patterns and satisfactory gains.

By introducing a modified F-shaped feeding strip and dual parasitic shorted strips, a small-size wireless wide area network/long-term evolution (WWAN/LTE) printed antenna is proposed and embedded in the 4 G mobile phone with octa-band operation. The operating impedance bandwidths (RL ≥ 6 dB) of 263/1093 MHz can be obtained across the LTE/WWAN bands, respectively. The overall antenna size of the proposed printed monopole antenna (MA) is only 35 × 10 × 0.8 mm3. Meanwhile, this small-size MA provides the measured peak gains and antenna efficiencies of 2.0/3.6 dBi and 80/75% for the LTE/WWAN bands, respectively.

This paper proposes a planar monopole antenna with a parabolic edge shape. This antenna, which has notch characteristics in the wireless local area network (WLAN) band, can be miniaturized. To obtain the notch characteristics in the WLAN band, a slot with a parabolic edge shape identical to that of the monopole structure was implemented. Because the planar monopole antenna with a parabolic edge shape possesses characteristics similar to those in self-complementary structure conditions, it can be miniaturized by reducing the antenna components at the same proportion. For the antenna fabrication, an FR4 dielectric substrate with a dielectric constant of 4.7 was used. The size of the miniaturized antenna that satisfies the ultra-wide band requirement was 15.6 × 18.6 mm2, and the 10-dB band was 3.013–12.515 GHz. At each frequency, the radiation pattern was similar to that of a dipole antenna.

A compact asymmetric coplanar strip fed Sinc shaped monopole antenna suitable for multifrequency operations is proposed for portable wireless devices. The proposed Sinc shaped monopole antenna with truncated half ground plane operates at three frequency bands, 2110–2380, 4180–4600, and 5200–5678 MHz, showing fractional impedance bandwidths of 12, 9, and 8.8%, respectively, suitable for Universal Mobile Telecommunications System, Long Term Evolution handheld devices, Worldwide Interoperability for Microwave Access, Wireless Local Area Network, Hyperlan-2, and aeronautical navigation applications. Proposed antenna shows a dual mode of polarization. Finally a prototype model is developed for a typical configuration and the simulated results are validated experimentally.

In this paper a novel compact multi-band printed coplanar waveguide (CPW)-feed antenna for wireless local area network (WLAN)/WiMAX/RFID applications is proposed. The proposed antenna is composed of a multi-triangular structure as metal ground plane and the radiation element with four different branches, both of the structures are printed on the same side of a substrate and the antenna is fed by a CPW. By carefully tuning the locations and the sizes of these four branches, the antenna can yield three different resonating frequencies to cover the desired bands for WLAN/WiMAX/RFID applications. The simulated and measured results demonstrate that the proposed antenna has the impedance bandwidth (for return loss less than −10 dB) of 700 MHz (2.2−2.9 GHz), 540 MHz (3.16–3.7 GHz), and 850 MHz (5.05–5.9 GHz), respectively, which can cover the WLAN 2.4/5.8 GHz bands, the WiMAX 2.5/3.5 GHz bands, and the RFID 2.45/5.8 GHz bands.

A planar circularly polarized (CP) monopole antenna (MA) with dual-band operation for the IEEE 802.11a/b/g wireless local area network (WLAN) is proposed. By introducing dual strip-sleeves shorted at the ground plane, the excitation of dual-resonant modes can resemble the 2.4/5.2 GHz bands required for WLAN operations. The obtained impedance bandwidths (RL ≧10 dB) across the operating bands approach 260/988 MHz and the 3 dB axial-ratio bandwidth of about 103/710 MHz for 2.4/5.2 GHz bands, respectively. The model proposed in this study reflects more advantages in physical implementation as its overall volume is only 40 × 40 × 0.8 mm3, 22% smaller than other conventional CP MAs. The measured peak gain and radiation efficiency are about 4.1/3.3 dBic and 94/84%, respectively, and demonstrate nearly bidirectional patterns in the XZ- and YZ-planes.

This research work presents a microstrip-fed antenna that is small, low-profile, planar, and suitable for WLAN/WiMAX and partially ultra-wideband (UWB) applications. The radiating element of the proposed antenna consists of rectangular-shaped ring embedded with a three inverted “S”-shaped and inverted “C”-shaped strips. This antenna is capable of generating penta bands having good impedance matching with wideband characteristics. Prototype of the proposed antenna has been designed, simulated, fabricated, and tested. The overall small size of the antenna is 24.75 mm × 27.39 mm × 1.6 mm with volumetric size of 1 cm3. To understand the characteristics of the proposed antenna, the parametric studies are being performed. The return loss of the proposed antenna shows fair agreement with the simulated and measured results.